Skip to contentSkip to conversation

[2.4.25] PCMCIA PCI: No IRQ for interrupt pin A and failed to allocate shared interrupt

DISCUSSION Daniel Ritz 1 participant 1 message Apr 13, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

the problem seems to be very simple: yenta can't get an interrupt 'cos another driver has the same interrupt line exclusivley. it's the pc110pad driver. deactivate it under

	Character devices  --->
		Mice  --->
			<n> PC110 digitizer pad support

and yenta get's it's interrupt back :)
it's a driver for the digitizer pad on the IBM PC110 palmtop. i don't think you need it.

your cardbus firewire card will work too, since it shares the interrupt line with the cardbus bridge.

rgds
-daniel