Skip to contentSkip to conversation

Linux on UltraSparcII E450

DISCUSSION Marc Giger 3 participants 4 messages Apr 17, 2004

lore
Share & tools
lore

Marc Giger

author
#0 lore raw

Hi All,

Last week I had the honor to install Linux on a E450 with 2 cpu's. All went fine at first. Long compiling sessions were no problem for the machine. Later we installed 16 additional SCSI disks and we built 4 x Soft-RAID5 groups with 4 disks each.
After some time during the sync processes the machine stops responding. Simply dead. The same thing happens after every boot when the sync process is in action.

My question now is: Is it a hardware or a kernel problem? I now it isn't a simple question with the given infos.
Is it possible that the 4 parallel sync processes are to much for the SCSI (standard LSI) controllers?
I assume that the kernel RAID5 code is stable on sparc?!

Thank you

Regards

Marc

#1 lore raw

Hmmm, I believe you forgot to tell which kernel version you used, and how you configured it :-)

Willy

Quoted 26 lines · Marc Giger

Hi All,

Last week I had the honor to install Linux on a E450 with 2 cpu's. All went fine at first. Long compiling sessions were no problem for the machine. Later we installed 16 additional SCSI disks and we built 4 x Soft-RAID5 groups with 4 disks each.
After some time during the sync processes the machine stops responding. Simply dead. The same thing happens after every boot when the sync process is in action.

My question now is: Is it a hardware or a kernel problem? I now it isn't a simple question with the given infos.
Is it possible that the 4 parallel sync processes are to much for the SCSI (standard LSI) controllers?
I assume that the kernel RAID5 code is stable on sparc?!

Thank you

Regards

Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#2 lore raw
Quoted 4 lines · On Sat, 17 Apr 2004 12:06:30 +0200 Willy Tarreau <[email protected]> wrote:

Hmmm, I believe you forgot to tell which kernel version you used, and how you configured it :-)

Willy

Oh f**k:-) Sorry for that.

It is 2.4.26.

Sorry, I can't attach the .config because I'm not near the machine...

RAID1 + RAID5 code in kernel.
No preempt but SMP.
ext3 fs on all disks.
Most other code as modules configured.

Hopefully nothing forgotten this time.

Thank you!

Regards

Marc

Quoted 29 lines · Marc Giger
Quoted 26 lines

Hi All,

Last week I had the honor to install Linux on a E450 with 2 cpu's. All went fine at first. Long compiling sessions were no problem for the machine. Later we installed 16 additional SCSI disks and we built 4 x Soft-RAID5 groups with 4 disks each.
After some time during the sync processes the machine stops responding. Simply dead. The same thing happens after every boot when the sync process is in action.

My question now is: Is it a hardware or a kernel problem? I now it isn't a simple question with the given infos.
Is it possible that the 4 parallel sync processes are to much for the SCSI (standard LSI) controllers?
I assume that the kernel RAID5 code is stable on sparc?!

Thank you

Regards

Marc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
In reply to Marc Giger
Quoted 10 lines · Marc Giger

Hi All,

Last week I had the honor to install Linux on a E450 with 2 cpu's. All went fine at first. Long compiling sessions were no problem for the machine. Later we installed 16 additional SCSI disks and we built 4 x Soft-RAID5 groups with 4 disks each.
After some time during the sync processes the machine stops responding. Simply dead. The same thing happens after every boot when the sync process is in action.

Quoted 5 lines

My question now is: Is it a hardware or a kernel problem? I now it isn't a simple question with the given infos.
Is it possible that the 4 parallel sync processes are to much for the SCSI (standard LSI) controllers?
I assume that the kernel RAID5 code is stable on sparc?!

Try enabling some debug, like spinlock debug and such. See if that spits out anything interesting.

Signature · 4 lines
Debian     - http://www.debian.org/
Linux 1394 - http://www.linux1394.org/
Subversion - http://subversion.tigris.org/
WatchGuard - http://www.watchguard.com/