which is the best root File system in embed linux system?
Quoted 25 lines
Quoted 3 lines · In message <[email protected]> you wrote:
I have not measure the speed of accessing files, so have not the exact concept:)
Then go back one step: before using any software, start by writing down the requirements and specifications.
Quoted 2 lines
Now the EXT2 FS is about 13MB(whithout any applications), maybe it is too biger?
No, this is not the problem.
Quoted 7 lines
Oh, I am sorry that not write the detail! Now we have two kind of 8XX boards, one is MPC855T board, and for low cost, we developed MPC852T, one use 32M DOC, another use 8MB+512KB flash. I have success building a EXT2 FS on DOC, and a JFFS2 FS on flash, but they all seems unstable when turn off/on power frequently, so I am worry now, and I want to know what bring on these unstable problems, our design problems or DOC/FS inherent bugs?
Assuming you use recent MTD and JFFS2 code, then JFFS2 should be absolutely stable on the 8MB flash system.
Quoted 8 lines
As for ext2 on DOC: this is bounmd to fail, as ext2 was not designed to be used in a mode where sudden power-of without previous umount can occur.
Quoted 2 lines
Oh..., because turn off the power through hardware power switch, so don't remount the file system!
This is your problem. You cannot use ext2 for such a system, then.
Thanks a lot:)
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/