kernel: hdc: dma_timer_expiry: dma status == 0x20
Hello i have troubles with port ide1 and my disc matrox 80gb, error dma
this is error:
Apr 22 13:03:02 MeDuSa kernel: hdc: dma_timer_expiry: dma status == 0x20
Apr 22 13:03:02 MeDuSa kernel: hdc: timeout waiting for DMA
Apr 22 13:03:02 MeDuSa kernel: hdc: timeout waiting for DMA
Apr 22 13:03:02 MeDuSa kernel: hdc: (__ide_dma_test_irq) called while
not waiting
Apr 22 13:03:02 MeDuSa kernel: hdc: status error: status=0x58 {
DriveReady SeekComplete DataRequest }
Apr 22 13:03:02 MeDuSa kernel: hdc: drive not ready for command
Apr 22 13:03:02 MeDuSa kernel: hdc: status timeout: status=0xd0 { Busy }
Apr 22 13:03:02 MeDuSa kernel: hdc: drive not ready for command
Apr 22 13:03:02 MeDuSa kernel: ide1: reset: success
Apr 24 20:25:48 MeDuSa kernel: hdc: dma_timer_expiry: dma status == 0x20
Apr 24 20:25:48 MeDuSa kernel: hdc: timeout waiting for DMA
Apr 24 20:25:48 MeDuSa kernel: hdc: timeout waiting for DMA
Apr 24 20:25:48 MeDuSa kernel: hdc: (__ide_dma_test_irq) called while
not waiting
Apr 24 20:25:48 MeDuSa kernel: hdc: status error: status=0x58 {
DriveReady SeekComplete DataRequest }
Apr 24 20:25:48 MeDuSa kernel: hdc: drive not ready for command
Apr 24 20:25:48 MeDuSa kernel: hdc: status timeout: status=0xd0 { Busy }
Apr 24 20:25:48 MeDuSa kernel: hdc: drive not ready for command
Apr 24 20:25:49 MeDuSa kernel: ide1: reset: successinfo my system:
cat /proc/version
Linux version 2.4.24 ([email protected]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 lun abr 19 00:17:19 CEST 2004
Linux MeDuSa.homeunix.net 2.4.24 #1 lun abr 19 00:17:19 CEST 2004 i586 GNU/Linux
Gnu C 3.3.3 Gnu make 3.80 util-linux 2.12 mount 2.12 modutils 2.4.26 e2fsprogs 1.35 PPP 2.4.2 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.2.0 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0.91 Modules Loaded ipt_multiport ipt_mac ipt_MASQUERADE iptable_nat
ip_conntrack iptable_filter ip_tables bsd_comp af_packet loop ide-cd cdrom hostap_plx hostap hostap_crypt
cat /proc/cpuinfo
processor : 0vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 12
cpu MHz : 132.634fdiv_bug : nohlt_bug : nof00f_bug : yescoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8
bogomips : 264.60
cat /proc/modules
ipt_multiport 632 2 (autoclean) ipt_mac 664 8 (autoclean) ipt_MASQUERADE 1304 1 (autoclean) iptable_nat 15672 1 (autoclean) [ipt_MASQUERADE] ip_conntrack 17960 1 (autoclean) [ipt_MASQUERADE
iptable_nat]iptable_filter 1668 1 (autoclean)ip_tables 11096 7 [ipt_multiport ipt_mac ipt_MASQUERADEiptable_nat iptable_filter]
bsd_comp 3992 0 (autoclean) af_packet 8328 3 (autoclean) loop 8248 0 (autoclean) ide-cd 28512 0 cdrom 27200 0 [ide-cd] hostap_plx 43380 1 hostap 65636 0 [hostap_plx] hostap_crypt 1328 0 [hostap]
cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
6100-61ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
6100-61ff : 8139too
6200-627f : 3Com Corporation 3c900B-TPO [Etherlink XL TPO]
6200-627f : 00:12.0
6300-637f : Standard Microsystems Corp [SMC] SMC2602W EZConnect /
Addtron AWA-100
6400-643f : Standard Microsystems Corp [SMC] SMC2602W EZConnect /
Addtron AWA-100
6500-651f : Realtek Semiconductor Co., Ltd. RTL-8029(AS)
6500-651f : ne2k-pci
f000-f00f : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]
f000-f007 : ide0
f008-f00f : ide1
cat /proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-002a7ce5 : Kernel code
002a7ce6-002fe487 : Kernel data
e0000000-e00000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
e0000000-e00000ff : 8139too
e0001000-e000107f : 3Com Corporation 3c900B-TPO
[Etherlink XL TPO]
e0002000-e0002fff : Standard Microsystems Corp [SMC]
SMC2602W EZConnect / Addtron AWA-100
ffff0000-ffffffff : reservedlspci -vvv
00:00.0 Host bridge: Intel Corp. 430VX - 82437VX TVX [Triton VX] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
00:07.0 ISA bridge: Intel Corp. 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at f000 [size=16]
00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 6100 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: 3Com Corporation 3c900B-TPO [Etherlink XL TPO] (rev 04)
Subsystem: 3Com Corporation 3C900B-TPO Etherlink XL TPO 10Mb
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 12000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6200 [size=128]
Region 1: Memory at e0001000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Network controller: Standard Microsystems Corp [SMC] SMC2602W EZConnect / Addtron AWA-100 (rev 02)
Subsystem: Standard Microsystems Corp [SMC] SMC2602W EZConnect / Addtron AWA-100
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 1: I/O ports at 6300 [size=128]
Region 2: Memory at e0002000 (32-bit, non-prefetchable) [size=4K]
Region 3: I/O ports at 6400 [size=64]
00:14.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at 6500 [size=32]
hdparam -I /dev/hdc
/dev/hdc:
ATA device, with non-removable media
Model Number: Maxtor 6Y080L0 Serial Number: Y3LLPCHE Firmware Revision: YAR41BW0 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 160086528 device size with M = 1024*1024: 78167 MBytes device size with M = 1000*1000: 81964 MBytes (81 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: unknown setting (0x0000) Recommended acoustic management value: 192, current value: 254
DMA: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* Automatic Acoustic Management feature set
SET MAX security extension
Advanced Power Management feature set
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- below Vih
Device num = 0 determined by the jumper
Checksum: correct
cat /proc/ide/drivers
ide-cdrom version 4.59-ac1
ide-disk version 1.17
ide-default version 0.9.newide
cat /proc/ide/piix
Controller: 0
Intel PIIX3 Chipset.
--------------- Primary Channel ---------------- Secondary Channel -------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: yes no no no
UDMA enabled: no no no no
UDMA enabled: X X X X
UDMA
DMA
PIO
this is every info, if you have some troubles my mail is [email protected]
Thanksss���