Skip to contentSkip to conversation

htb bandwith

LARTC derbel hajer 2 participants 3 messages May 3, 2004 – May 4, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

tc qdisc add dev eth0 root handle 1: htb

tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000Kbit ceil 2000kbit

tc class add dev eth0 parent 1:1 classid 1:2 htb rate 1200Kbit ceil 2000kbit

tc class add dev eth0parent 1:1 classid 1:3 htb rate 800Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:21 htb rate 600Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:22 htb rate 300Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:23 htb rate 200Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:24 htb rate 100Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:31 htb rate 400Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:32 htb rate 300Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:33 htb rate 100Kbit ceil 2000kbit

By using this script, the class 1: 2 can it borrow of the bandwidth not used

by the class 1: 3 (the classes 1:2 and 1:3 can she borrow of the busy band among them).

I want to control the used and free busy band during time.

For it there, I used the command: tc –s class ls dev eth0.

Which are the information supplied by this command, which I

should control to draft my interpretations on the use of the busy

band.
tkanks in advance

---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout ! Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !

#1 lore raw

Hi,

tc qdisc add dev eth0 root handle 1: htb

tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000Kbit ceil 2000kbit

tc class add dev eth0 parent 1:1 classid 1:2 htb rate 1200Kbit ceil 2000kbit

tc class add dev eth0parent 1:1 classid 1:3 htb rate 800Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:21 htb rate 600Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:22 htb rate 300Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:23 htb rate 200Kbit ceil 2000kbit

tc class add dev eth0 parent 1:2 classid 1:24 htb rate 100Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:31 htb rate 400Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:32 htb rate 300Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:33 htb rate 100Kbit ceil 2000kbit

By using this script, the class 1: 2 can it borrow of the

bandwidth not used by the class 1: 3 (the classes 1:2 and

1:3 can she borrow of the busy band among them).

I want to control the used and free busy band during time.

For it there, I used the command: tc –s class ls dev eth0.

Which are the information supplied by this command, which I

should control to draft my interpretations on the use of the bandwidth.

tkanks in advance

---------------------------------
Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout ! Créez votre Yahoo! Mail

Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !

#2 lore raw
In reply to derbel hajer
Quoted 25 lines · derbel hajer

Hi,

tc qdisc add dev eth0 root handle 1: htb

tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000Kbit ceil 2000kbit
tc class add dev eth0 parent 1:1 classid 1:2 htb rate 1200Kbit ceil 2000kbit
tc class add dev eth0parent 1:1 classid 1:3 htb rate 800Kbit ceil 2000kbit tc class add dev eth0 parent 1:2 classid 1:21 htb rate 600Kbit ceil 2000kbit
tc class add dev eth0 parent 1:2 classid 1:22 htb rate 300Kbit ceil 2000kbit
tc class add dev eth0 parent 1:2 classid 1:23 htb rate 200Kbit ceil 2000kbit
tc class add dev eth0 parent 1:2 classid 1:24 htb rate 100Kbit ceil 2000kbit

tc class add dev eth0 parent 1:3 classid 1:31 htb rate 400Kbit ceil
2000kbit
tc class add dev eth0 parent 1:3 classid 1:32 htb rate 300Kbit ceil 2000kbit
tc class add dev eth0 parent 1:3 classid 1:33 htb rate 100Kbit ceil 2000kbit

Quoted 3 lines

By using this script, the class 1: 2 can it borrow of the bandwidth not used by the class 1: 3 (the classes 1:2 and 1:3 can she borrow of the busy band among them).

Classes with the same parent, can borrow unused bandwidth from the parent. First, each class can send it's rate if they want. After that, remainig bandwidth is distributed proportional to the quantum which is proportional to the rate.

Quoted 4 lines

I want to control the used and free busy band during time. For it there, I used the command: tc –s class ls dev eth0. Which are the information supplied by this command, which I should control to draft my interpretations on the use of the bandwidth.

Try this page:
http://www.docum.org/stef.coene/qos/faq/cache/33.html

Stef

Signature · 6 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/