default to serial console when possible
PATCH 1/1 default to serial console when possible
This adds efi_uart_console_only() so we can default to using a serial console if the EFI console path only contains UARTs.
(This applies on top of Alex Williamson's recent HCDP patch.)
drivers/serial/8250_hcdp.c +8 -0
@@ -11,6 +11,7 @@*/ #include <linux/config.h> +#include <linux/console.h> #include <linux/kernel.h> #include <linux/efi.h> #include <linux/init.h>
@@ -44,6 +45,7 @@unsigned long iobase;hcdp_t hcdp;int gsi, nr; +static char options[16 ];#if 0 static int shift_once =1 ;#endif
@@ -210,6 +212,12 @@memset (&port,0 ,sizeof (port));continue ; } + +if (efi_uart_console_only ()) { +snprintf (options,sizeof (options),"%lun%d" , + hcdp_dev->baud, hcdp_dev->bits); +add_preferred_console ("ttyS" , port.line, options); + }break ; }
=== arch/ia64/kernel/efi.c 1.32 vs edited ==--- 1.32/arch/ia64/kernel/efi.c Mon Apr 26 23:07:41 2004
+++ edited/arch/ia64/kernel/efi.c Mon May 3 17:27:40 2004
@@ -733,3 +733,47 @@
return 0;
}
+int __init
+efi_uart_console_only(void)
+{
+ efi_status_t status;
+ char *s, name[] = "ConOut";
+ efi_guid_t guid = EFI_GLOBAL_VARIABLE_GUID;
+ efi_char16_t *utf16, name_utf16[32];
+ unsigned char data[1024];
+ unsigned long size = sizeof(data);
+ struct efi_generic_dev_path *hdr, *end_addr;
+ int uart = 0;
+
+ /* Convert to UTF-16 */
+ utf16 = name_utf16;
+ s = name;
+ while (*s)
+ *utf16++ = *s++ & 0x7f;
+ *utf16 = 0;
+
+ status = efi.get_variable(name_utf16, &guid, NULL, &size, data);
+ if (status != EFI_SUCCESS) {
+ printk(KERN_ERR "No EFI %s variable?\n", name);
+ return 0;
+ }
+
+ hdr = (struct efi_generic_dev_path *) data;
+ end_addr = (struct efi_generic_dev_path *) ((u8 *) data + size);
+ while (hdr < end_addr) {
+ if (hdr->type = EFI_DEV_MSG &&
+ hdr->sub_type = EFI_DEV_MSG_UART)
+ uart = 1;
+ else if (hdr->type = EFI_DEV_END_PATH ||
+ hdr->type = EFI_DEV_END_PATH2) {
+ if (!uart)
+ return 0;
+ if (hdr->sub_type = EFI_DEV_END_ENTIRE)
+ return 1;
+ uart = 0;
+ }
+ hdr = (struct efi_generic_dev_path *) ((u8 *) hdr + hdr->length);
+ }
+ printk(KERN_ERR "Malformed %s value\n", name);
+ return 0;
+}
=== include/linux/efi.h 1.7 vs edited ==--- 1.7/include/linux/efi.h Tue Feb 3 22:29:14 2004
+++ edited/include/linux/efi.h Mon May 3 17:26:46 2004
@@ -212,6 +212,9 @@
#define UGA_IO_PROTOCOL_GUID \
EFI_GUID( 0x61a4d49e, 0x6f68, 0x4f1b, 0xb9, 0x22, 0xa8, 0x6e, 0xed, 0xb, 0x7, 0xa2 )+#define EFI_GLOBAL_VARIABLE_GUID \
+ EFI_GUID( 0x8be4df61, 0x93ca, 0x11d2, 0xaa, 0x0d, 0x00, 0xe0, 0x98, 0x03, 0x2b, 0x8c )
+
typedef struct {
efi_guid_t guid;
unsigned long table;
@@ -294,6 +297,7 @@
extern u64 efi_get_iobase (void);
extern u32 efi_mem_type (unsigned long phys_addr);
extern u64 efi_mem_attributes (unsigned long phys_addr);
+extern int __init efi_uart_console_only (void);
extern void efi_initialize_iomem_resources(struct resource *code_resource,
struct resource *data_resource);
extern efi_status_t phys_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc);
@@ -322,6 +326,49 @@
#define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
#define EFI_VARIABLE_RUNTIME_ACCESS 0x0000000000000004
+/*
+ * EFI Device Path information
+ */
+#define EFI_DEV_HW 0x01
+#define EFI_DEV_PCI 1 +#define EFI_DEV_PCCARD 2 +#define EFI_DEV_MEM_MAPPED 3 +#define EFI_DEV_VENDOR 4 +#define EFI_DEV_CONTROLLER 5
+#define EFI_DEV_ACPI 0x02
+#define EFI_DEV_BASIC_ACPI 1
+#define EFI_DEV_EXPANDED_ACPI 2
+#define EFI_DEV_MSG 0x03
+#define EFI_DEV_MSG_ATAPI 1 +#define EFI_DEV_MSG_SCSI 2 +#define EFI_DEV_MSG_FC 3 +#define EFI_DEV_MSG_1394 4 +#define EFI_DEV_MSG_USB 5 +#define EFI_DEV_MSG_USB_CLASS 15 +#define EFI_DEV_MSG_I20 6 +#define EFI_DEV_MSG_MAC 11 +#define EFI_DEV_MSG_IPV4 12 +#define EFI_DEV_MSG_IPV6 13 +#define EFI_DEV_MSG_INFINIBAND 9 +#define EFI_DEV_MSG_UART 14 +#define EFI_DEV_MSG_VENDOR 10 +#define EFI_DEV_MEDIA 0x04 +#define EFI_DEV_MEDIA_HARD_DRIVE 1 +#define EFI_DEV_MEDIA_CDROM 2 +#define EFI_DEV_MEDIA_VENDOR 3 +#define EFI_DEV_MEDIA_FILE 4 +#define EFI_DEV_MEDIA_PROTOCOL 5
+#define EFI_DEV_BIOS_BOOT 0x05
+#define EFI_DEV_END_PATH 0x7F
+#define EFI_DEV_END_PATH2 0xFF
+#define EFI_DEV_END_INSTANCE 0x01
+#define EFI_DEV_END_ENTIRE 0xFF
+
+struct efi_generic_dev_path {
+ u8 type;
+ u8 sub_type;
+ u16 length;
+} __attribute ((packed));
/*
* efi_dir is allocated in arch/ia64/kernel/efi.c.
Russell King
AppliedQuoted 2 lines · Bjorn Helgaas
This adds
efi_uart_console_only()so we can default to using a serial console if the EFI console path only contains UARTs.
Applied, thanks.
Signature · 4 lines
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of: 2.6 PCMCIA - http://pcmcia.arm.linux.org.uk/
2.6 Serial core