swsusp documentation updates
Hi!
I'd like this to be included. People ask question I should have answered in the documentation.
Pavel
Documentation/power/swsusp.txt +56 -5
@@ -123,10 +123,61 @@ replace ethernet card, resume. If you are fast your users will not even see broken connections. -Any other idea you might have tell me! +Q: Maybe I'm missing something, but why doesn't the regular io paths +work? -Contacting the author -If you have any question or any patch that solves the above or detected -problems please contact me at [email protected]. I might delay -answering, sorry about that. +A: (Basically) you want to replace all kernel data with kernel data saved +on disk. How do you do that using normal i/o paths? If you'll read +"new" data 4KB at a time, you'll crash... because you still need "old" +data to do the reading, and "new" data may fit on same physical spot +in memory. +There are two solutions to this: + +* require half of memory to be free during suspend. That way you can +read "new" data onto free spots, then cli and copy + +* assume we had special "polling" ide driver that only uses memory +between 0-640KB. That way, I'd have to make sure that 0-640KB is free +during suspending, but otherwise it would work... + +Q: Does linux support ACPI S4? + +A: No. + +When swsusp was created, ACPI was not too widespread, so we tried to +avoid using ACPI-specific stuff. ACPI also is/was notoriously +buggy. These days swsusp works on APM-only i386 machines and even +without any power managment at all. Some versions also work on PPC. + +That means that machine does not enter S4 on suspend-to-disk, but +simply enters S5. That has few advantages, you can for example boot +windows on next boot, and return to your Linux session later. You +could even have few different Linuxes on your box (not sharing any +partitions), and switch between them. + +It also has disadvantages. On HP nx5000, if you unplug power cord +while machine is suspended-to-disk, Linux will fail to notice that. + +Q: My machine doesn't work with ACPI. How can I use swsusp than ? + +A: Do reboot() syscall with right parameters. Warning: glibc gets in +its way, so check with strace: + +reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, 0xd000fce2) + +(Thanks to Peter Osterlund:) + +#include <unistd.h> +#include <syscall.h> + +#define LINUX_REBOOT_MAGIC1 0xfee1dead +#define LINUX_REBOOT_MAGIC2 672274793 +#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2 + +int main() +{ + syscall(SYS_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, + LINUX_REBOOT_CMD_SW_SUSPEND, 0); + return 0; +}
Signature · 1 line
934a471f20d6580d5aad759bf0d97ddc
Howdy.
Documentation/power/swsusp.txt line 138
Quoted 4 lines · Pavel Machek
Documentation/power/swsusp.txt +4
-0+There are two solutions to this: + +* require half of memory to be free during suspend. That way you can +read "new" data onto free spots, then cli and copy
Would you consider adding:
(Suspend2, which allows more than half of memory to be saved, is a variant on this).
Regards,
Nigel
Signature · 7 lines
Nigel & Michelle Cunningham C/- Westminster Presbyterian Church Belconnen 61 Templeton Street, Cook, ACT 2614. +61 (2) 6251 7727(wk); +61 (2) 6254 0216 (home) Evolution (n): A hypothetical process whereby infinitely improbable events occur with alarming frequency, order arises from chaos, and no one is given credit.
Hi!
Quoted 9 lines
Documentation/power/swsusp.txt line 138
Quoted 4 lines
Documentation/power/swsusp.txt +4
-0+There are two solutions to this: + +* require half of memory to be free during suspend. That way you can +read "new" data onto free spots, then cli and copyWould you consider adding:
(Suspend2, which allows more than half of memory to be saved, is a variant on this).
How would you like this added?
swsusp2 shares this fundamental limitation, but does not include user data and disk caches into "used memory" by saving them in advance. That means that limitation goes away in practice.
And perhaps you want to write "What is swsusp2?" question/answer?
Pavel
Signature · 1 line
934a471f20d6580d5aad759bf0d97ddc
Howdy.
Quoted 9 lines · Pavel Machek
Hi!
Quoted 7 lines
Documentation/power/swsusp.txt line 138
Quoted 4 lines
Documentation/power/swsusp.txt +4
-0+There are two solutions to this: + +* require half of memory to be free during suspend. That way you can +read "new" data onto free spots, then cli and copyWould you consider adding:
Quoted 4 lines
Quoted 2 lines
(Suspend2, which allows more than half of memory to be saved, is a variant on this).
How would you like this added?
Well, I was thinking of simply adding the above in brackets on the same or the next line.
Quoted 5 lines
swsusp2 shares this fundamental limitation, but does not include user data and disk caches into "used memory" by saving them in advance. That means that limitation goes away in practice.
And perhaps you want to write "What is swsusp2?" question/answer?
I'm avoiding calling it swsusp2 because 'swsusp' is unpronouncable. It also gets different interpretations: suspend2 isn't 'swap suspend' because it's not inherently limited to saving to swap. 'software suspend' is too long and doesn't seem to occur as quickly. Thus I'm simply using suspend2.
Regards,
Nigel
Signature · 7 lines
Nigel & Michelle Cunningham C/- Westminster Presbyterian Church Belconnen 61 Templeton Street, Cook, ACT 2614. +61 (2) 6251 7727(wk); +61 (2) 6254 0216 (home) Evolution (n): A hypothetical process whereby infinitely improbable events occur with alarming frequency, order arises from chaos, and no one is given credit.
Hi.
Quoted 9 lines · Pavel Machek
Hi!
Quoted 7 lines
Documentation/power/swsusp.txt line 138
Quoted 4 lines
Documentation/power/swsusp.txt +4
-0+There are two solutions to this: + +* require half of memory to be free during suspend. That way you can +read "new" data onto free spots, then cli and copyWould you consider adding:
Quoted 8 lines
Quoted 2 lines
(Suspend2, which allows more than half of memory to be saved, is a variant on this).
How would you like this added?
swsusp2 shares this fundamental limitation, but does not include user data and disk caches into "used memory" by saving them in advance. That means that limitation goes away in practice.
That sounds good. I'd include that.
Quoted 1 line
And perhaps you want to write "What is swsusp2?" question/answer?
How does this sound?...
What is 'swsusp2'?
swsusp2 is Software Suspend 2, forked implementation of suspend-to-disk which is available as separate patches for 2.4 and 2.6 kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB Highmem and preemption. It also has a extensible architecture that allows for arbitrary transformations on the image (compression, encryption) and arbitrary backends for writing the image (eg to swap or an NFS share[Work In Progress]). Questions regarding suspend2 should be sent to the mailing list available through the Suspend2 website, and not to the Linux Kernel Mailing List. We are working toward merging Suspend2 into the mainline kernel.
Signature · 7 lines
Nigel & Michelle Cunningham C/- Westminster Presbyterian Church Belconnen 61 Templeton Street, Cook, ACT 2614. +61 (2) 6251 7727(wk); +61 (2) 6254 0216 (home) Evolution (n): A hypothetical process whereby infinitely improbable events occur with alarming frequency, order arises from chaos, and no one is given credit.
Hi!
Quoted 6 lines
Quoted 1 line
And perhaps you want to write "What is swsusp2?" question/answer?
How does this sound?...
What is 'swsusp2'?
Quoted 10 lines
swsusp2 is Software Suspend 2, forked implementation of suspend-to-disk which is available as separate patches for 2.4 and 2.6 kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB Highmem and preemption. It also has a extensible architecture that allows for arbitrary transformations on the image (compression, encryption) and arbitrary backends for writing the image (eg to swap or an NFS share[Work In Progress]). Questions regarding suspend2 should be sent to the mailing list available through the Suspend2 website, and not to the Linux Kernel Mailing List. We are working toward merging Suspend2 into the mainline kernel.
You are using swsusp2, suspend2 and Suspend2. I figured out you mean suspend2 and applied this: (it will eventually propagate).
Pavel
Q: What is 'suspend2'?
A: suspend2 is 'Software Suspend 2', forked implementation of suspend-to-disk which is available as separate patches for 2.4 and 2.6 kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB highmem and preemption. It also has a extensible architecture that allows for arbitrary transformations on the image (compression, encryption) and arbitrary backends for writing the image (eg to swap or an NFS share[Work In Progress]). Questions regarding suspend2 should be sent to the mailing list available through the suspend2 website, and not to the Linux Kernel Mailing List. We are working toward merging suspend2 into the mainline kernel.
Signature · 1 line
When do you have heart between your knees?
Hi.
Quoted 3 lines · Pavel Machek
You are using swsusp2, suspend2 and Suspend2. I figured out you mean suspend2 and applied this: (it will eventually propagate).
Pavel
Sorry. Yes, I did mean suspend2. Thanks!
Nigel
Documentation/power/swsusp.txt line 147
Quoted 10 lines · Pavel Machek
Hi!
I'd like this to be included. People ask question I should have answered in the documentation.
Documentation/power/swsusp.txt +5
-0+ +Q: Does linux support ACPI S4? + +A: No. +
...that is auite surprising, meaning that I haven't understood anything till now. I have a Sony vaio (http://perso.wanadoo.es/r_mano/vaio/vaio.html),
with ACPI compiled in, and I did suspend with echo 4 > /proc/acpi/sleep...
...retreating in my shell...
Romano
Signature · 2 lines
Romano Giannetti - Univ. Pontificia Comillas (Madrid, Spain) Electronic Engineer - phone +34 915 422 800 ext 2416 fax +34 915 596 569
Hi!
Quoted 13 lines
Documentation/power/swsusp.txt line 147
Quoted 8 lines
I'd like this to be included. People ask question I should have answered in the documentation.
Documentation/power/swsusp.txt +5
-0+ +Q: Does linux support ACPI S4? + +A: No. +...that is auite surprising, meaning that I haven't understood anything till now. I have a Sony vaio (http://perso.wanadoo.es/r_mano/vaio/vaio.html),
with ACPI compiled in, and I did suspend with echo 4 >/proc/acpi/sleep...
Quoted 1 line
...retreating in my shell...
No, echo 4 > /proc/acpi/sleep should suspend your machine; but it will not be true "ACPI S4" sleep. It is just suspend to disk. ACPI thinks machine is in S5.
Pavel
Signature · 1 line
934a471f20d6580d5aad759bf0d97ddc