"PCI: Unable to reserve mem region" problem
I have PCI-PCMCIA adapter (Ricoh RL5C475 based) in a desktop machine.
Initially, I had problems making it work, but managed to get help on comp.os.linux.portable. Now, most of the cards work okay.
However, I still have one wireless PCMCIA card (Prism GT based) which doesn't work, and was advised to post the problem here.
I have noticed that quite few other people (on prism54 mailing list, for example) have similar/same problems, and noone could find a solution.
Dave (from comp.os.linux.portable) said:
"This part is a tricky one. It is a bug in the kernel's PCI resource allocation code. It tries to allocate CardBus memory resources from whatever memory ranges happened to be allocated for the bridge device by the BIOS at power-up time; but in this case, those memory windows are too small. There isn't a simple fix for this and I don't have a good suggestion for what to do about it; you can report it on the linux-kernel mailing list."
cardmgr starts okay, and when I insert the card, I get:
Apr 23 16:16:52 amber cardmgr[7537]: watching 1 socket Apr 23 18:16:52 amber kernel: cs: IO port probe 0xc000-0xcfff: clean. Apr 23 18:16:58 amber kernel: cs: cb_alloc(bus 2): vendor 0x1260, device 0x3890 Apr 23 18:16:58 amber kernel: PCI: Failed to allocate resource 0(e2006000-e2004fff) for 02:00.0 Apr 23 18:16:58 amber kernel: PCI: Enabling device 02:00.0 (0000 -> 0002) Apr 23 16:16:58 amber cardmgr[7538]: socket 0: CardBus hotplug device Apr 23 18:16:58 amber /etc/hotplug/pci.agent: Setup prism54 for PCI slot 02:00.0 Apr 23 18:16:58 amber kernel: Loaded prism54 driver, version 1.1 Apr 23 18:16:58 amber kernel: PCI: Unable to reserve mem region #1:fffff000@e2006000 for device 02:00.0 Apr 23 18:16:58 amber kernel: PCI: Unable to reserve mem region #1:fffff000@e2006000 for device 02:00.0 Apr 23 18:16:58 amber kernel: prism54: pci_request_regions failure (rc=-16) Apr 23 18:16:58 amber insmod: /lib/modules/2.4.26/kernel/drivers/net/wireless/prism54/prism54.o: init_module: No such device Apr 23 18:16:58 amber insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg Apr 23 18:16:58 amber insmod: /lib/modules/2.4.26/kernel/drivers/net/wireless/prism54/prism54.o: insmod /lib/modules/2.4.26/kernel/drivers/net/wireless/prism54/prism54.o failed Apr 23 18:16:58 amber insmod: /lib/modules/2.4.26/kernel/drivers/net/wireless/prism54/prism54.o: insmod prism54 failed Apr 23 18:16:58 amber /etc/hotplug/pci.agent: ... can't load module prism54 Apr 23 18:16:58 amber /etc/hotplug/pci.agent: missing kernel or user mode driver prism54
lspci -vvv shows:
...
01:08.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
Subsystem: CARRY Computer ENG. CO Ltd: Unknown device 0101
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=02, sec-latency=176
Memory window 0: e2001000-e2002000 (prefetchable)
Memory window 1: e2003000-e2004000
I/O window 0: 0000c000-0000c403
I/O window 1: 0000c800-0000cc03
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 000102:00.0 Network controller: Intersil Corporation Intersil ISL3890 [Prism GT/Prism Duette] (rev 01)
Subsystem: Unknown device 17cf:0014
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: [virtual] Memory at e2006000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
...
Kernel is 2.4.26, running on nForce2 based motherboard (DFI, not sure what exact model/BIOS, can't reboot the machine now). Kernel is compiled with CONFIG_HIMEM enabled, although same behaviour was with the same option disabled.
Any help with this is much appreciated. I will provide more details, if needed.
Thanks.