Hard Drive Puzzle
Hi
My old HD which I had moved from my old PC to my new PC as master drive has 2 partitions, one for dos and one for linux. The MBR resided on dos.
I installed now a new HD on the new PC and moved the old HD back to the old PC as master drive. On the linux partition of this old drive I made a new installation of RedHat 9.0. The dos partition was not touched.
Now to my surprise I cannot boot into dos. If I try I get the error message:
this is not a bootable disk, please insert a bootable floppy.
If I remove this old HD and put it into the new PC as slave drive I can boot into the dos partition of this old drive.
How does one explain this and how can it be corrected that I can boot into dos on the old PC?
Thanks & regards
Signature · 7 lines
Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 4 lines · Peter
Hi
My old HD which I had moved from my old PC to my new PC as master drive has 2 partitions, one for dos and one for linux. The MBR resided on dos.
No, the MBR is a set location on the disk, and it resides outside any partition. Do you mean that you have the drive's boot loader in the DOS partition instead of in the MBR?
Quoted 6 lines
I installed now a new HD on the new PC and moved the old HD back to the old PC as master drive. On the linux partition of this old drive I made a new installation of RedHat 9.0. The dos partition was not touched.
Now to my surprise I cannot boot into dos. If I try I get the error message:
this is not a bootable disk, please insert a bootable floppy.
Am I right in thinking that you *can* boot into Red Hat from this disk? How do you "try" to boot into DOS?
Quoted 2 lines
If I remove this old HD and put it into the new PC as slave drive I can boot into the dos partition of this old drive.
Once again, what procedure are you using to "boot into the dos partition"? Are you adding a stanza to lilo, or entering command-line options at boottime? Or what?
Quoted 2 lines
How does one explain this and how can it be corrected that I can boot into dos on the old PC?
Probably you have to modify /etc/lilo.conf so it provides an option to boot into DOS. But until you describe better what you are doing that works when the drive is a slave in one machine, but fails when it is the master in a different one, it will be hard to give you more exact advice.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs