Skip to contentSkip to conversation

2.6.6-mm3: i810 agpgart module can't be initialized

DISCUSSION Jean Delvare 2 participants 2 messages May 23, 2004 – May 24, 2004

lore
Share & tools
lore
#0 lore raw

Hi Clemens,

Quoted 9 lines

I have the same problem with 2.6.6-mm3 like I had with 2.6.6-mm2

in my dmesg I have this (complete attached):

i810fb: cannot acquire agp
...
Linux agpgart interface v0.100 (c) Dave Jones [drm:i810_probe] *ERROR* Cannot initialize the agpgart module
...

Could be that you have the i2c-i810 driver loaded. Both drivers (i2c and fb) request the PCI device AFAIK, so they are mutually exclusive.

Both drivers should proably be merged so as to solve that issue, but nodoby seems to be interested in working on this right now. And I won't do it, I don't even have compatible hardware to test on.

Just my two cents, hope it helps.

Signature · 2 lines
Jean Delvare
http://khali.linux-fr.org/
#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Jean Delvare wrote:

| Hi Clemens,
|
| Could be that you have the i2c-i810 driver loaded. Both drivers (i2c and
| fb) request the PCI device AFAIK, so they are mutually exclusive.
|
| Both drivers should proably be merged so as to solve that issue, but
| nodoby seems to be interested in working on this right now. And I won't
| do it, I don't even have compatible hardware to test on.

well they shouldn't, shouldn't they. Anyway in mm4 this problem doesn't exist anymore.

- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703 Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAsUREjBz/yQjBxz8RAtKQAKC2XS8HzUcJDp6vlJJgLqMDehl5HwCgtZ7I xfPWVArBnTEkFHujUZLE0d4=
=NOy+
-----END PGP SIGNATURE-----