Skip to contentSkip to conversation

2.4.26 agpgart on Tyan K8W 32bit not working?

DISCUSSION gb 1 participant 1 message May 25, 2004

lore
Share & tools
lore

gb

author
#0 lore raw

...damned yahoo. Please allow me to finish this email...

Quoted 3 lines

I have tried booting with:

kernel /vmlinuz-2.4.26-bangalore4-01 ro

root=/dev/hda2

Quoted 1 line

hdc=ide-scsi apm=power-off agp_try_unsupported=1

but get the same results.

So the most obvious difference is that lspci returns

Quoted 4 lines

04:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 13) 04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 13)

on a 64bit kernel, whereas this is missing on a 32bit kernel. This may have something to do with the agpgart messages spit out on the 32bit kernel.

The .config I am using has these two options:

[root@profit root]# grep AGP /usr/src/linux/.config CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_I810=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_AMD_K8=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
# CONFIG_AGP_SWORKS is not set CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_ATI is not set

So perusing the agpgart_be.c file appears that this should work on a 32bit kernel. What I am missing?

Please let me know if you have any suggestions or comments.

Thanks,

--Greg

__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/