Skip to contentSkip to conversation

2.6-BK usb (printing) broken

DISCUSSION Jens Axboe 2 participants 3 messages May 29, 2004

lore
Share & tools
lore

Jens Axboe

author
#0 lore raw

Hi,

Something between 2.6.7-rc1 and current 2.6-BK broke usb printing here again. I have two printers attached:

usb 1-1: new full speed USB device using address 6 usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 6, error -110 usb 1-1: new full speed USB device using address 7 usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 7, error -110

It's a VIA EPIA-800 board, lspci shows the following for usb:

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 24) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 24)

Signature · 1 line
Jens Axboe
#1 lore raw
Quoted 13 lines · Jens Axboe

Something between 2.6.7-rc1 and current 2.6-BK broke usb printing here again. I have two printers attached:

usb 1-1: new full speed USB device using address 6 usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 6, error -110 usb 1-1: new full speed USB device using address 7 usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 7, error -110

Quoted 4 lines

It's a VIA EPIA-800 board, lspci shows the following for usb:

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 24) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 24)

Alan, looks like your "fix the VIA controller driver" patch broke something here, care to look into it?

thanks,

greg k-h

author
#2 lore raw
Quoted 14 lines · Greg KH
Quoted 13 lines · Jens Axboe

Something between 2.6.7-rc1 and current 2.6-BK broke usb printing here again. I have two printers attached:

usb 1-1: new full speed USB device using address 6 usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 6, error -110 usb 1-1: new full speed USB device using address 7 usb 1-1: control timeout on ep0out
usb 1-1: control timeout on ep0out
usb 1-1: device not accepting address 7, error -110

Quoted 7 lines
Quoted 4 lines

It's a VIA EPIA-800 board, lspci shows the following for usb:

00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 24) 00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 24)

Alan, looks like your "fix the VIA controller driver" patch broke something here, care to look into it?

Thanks for the hint, backing out this patch:

http://www.kernel.org/pub/linux/kernel/v2.5/testing/cset/[email protected]|ChangeSet|20040525183839|17182.txt

fixes 2.6-BK for me. Both 2.6.7-rc1 and BK current spit out a bunch of:

drivers/usb/class/usblp.c: usblp1: nonzero read/write bulk status received: -2 drivers/usb/class/usblp.c: usblp1: error -2 reading from printer drivers/usb/class/usblp.c: usblp1: error -115 reading from printer drivers/usb/class/usblp.c: usblp1: error -115 reading from printer
...

(about ~80 of that last line) but work for me.

Signature · 1 line
Jens Axboe