rmmod snd-es1968 crashes my laptop...
...if the us428 is running.
the us428 (via uhci module) uses exactly the same irq 5 as the snd-es1968 here.
If the us428 is deactivated, that is there are only snd-es1968 related interrupts on irq5, "rmmod snd-es1968" is ok.
This prevents the crash here (2.4.26 kernel, planet CCRMA fc1):
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
pci/es1968.c +1 -1
@@ -2477,7 +2477,7 @@ kfree_nocheck(chip->res_joystick); }#endif -snd_es1968_set_acpi (chip,ACPI_D3 ); +//snd_es1968_set_acpi(chip, ACPI_D3); chip->master_switch =NULL ; chip->master_volume =NULL ;if (chip->res_io_port) {
<<<<<<
I don't know, if this is the correct solution.
Let me know, if you need more details or tests.
thanks,
Karsten
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
At Sun, 13 Jun 2004 20:23:48 +0200,
Quoted 22 lines · Karsten Wiese
...if the us428 is running.
the us428 (via uhci module) uses exactly the same irq 5 as the snd-es1968 here.
If the us428 is deactivated, that is there are only snd-es1968 related interrupts on irq5, "rmmod snd-es1968" is ok.This prevents the crash here (2.4.26 kernel, planet CCRMA fc1):
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
pci/es1968.c +1
-1@@ -2477,7 +2477,7 @@ kfree_nocheck(chip->res_joystick); }#endif -snd_es1968_set_acpi (chip,ACPI_D3 ); +//snd_es1968_set_acpi(chip, ACPI_D3); chip->master_switch =NULL ; chip->master_volume =NULL ;if (chip->res_io_port) {<<<<<<
Quoted 2 lines
I don't know, if this is the correct solution.
Let me know, if you need more details or tests.
I also don't know whether it's correct :)
ESS chip is always in tons of mystery.
Does the driver work if you reload the module again? How about suspend/resume?
Takashi
-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
Quoted 1 line
From Windows to Linux, servers to mobile, InstallShield X is the
one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504
Am Montag 14 Juni 2004 15:39 schrieb Takashi Iwai:
Quoted 24 lines
At Sun, 13 Jun 2004 20:23:48 +0200,
Quoted 21 lines · Karsten Wiese
...if the us428 is running.
the us428 (via uhci module) uses exactly the same irq 5 as the snd-es1968 here.
If the us428 is deactivated, that is there are only snd-es1968 related interrupts on irq5, "rmmod snd-es1968" is ok.This prevents the crash here (2.4.26 kernel, planet CCRMA fc1):
pci/es1968.c +1
-1@@ -2477,7 +2477,7 @@ kfree_nocheck(chip->res_joystick); }#endif -snd_es1968_set_acpi (chip,ACPI_D3 ); +//snd_es1968_set_acpi(chip, ACPI_D3); chip->master_switch =NULL ; chip->master_volume =NULL ;if (chip->res_io_port) {<<<<<<
Quoted 7 lines
Quoted 2 lines
I don't know, if this is the correct solution.
Let me know, if you need more details or tests.I also don't know whether it's correct :)
ESS chip is always in tons of mystery.Does the driver work if you reload the module again?
Yes.
Quoted 1 line
How about suspend/resume?
"apmsleep --suspend +1:00" is OK!
At least the devices (Maestro2 & us428) are fully functional after wakeup. I made shure by inserting snd_printd in es1968_resume & es1968_suspend t5hat those are called in the process.
the us428 gets restarted by hotplug, I guess.
The apps I tested (Ecasound & KDE's artsd) didn't survive though.
This patch keeps the "snd_es1968_set_acpi(chip, ACPI_D3);":
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Index: es1968.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/es1968.c,v retrieving revision 1.66
es1968.c +1 -1
@@ -2477,7 +2477,6 @@ kfree_nocheck(chip->res_joystick); }#endif -snd_es1968_set_acpi (chip,ACPI_D3 ); chip->master_switch =NULL ; chip->master_volume =NULL ;if (chip->res_io_port) {
@@ -2486,6 +2485,7 @@ }if (chip->irq >=0 )free_irq (chip->irq, (void *)chip); +snd_es1968_set_acpi (chip,ACPI_D3 );snd_magic_kfree (chip);return 0 ; }
<<<<<<
I think its OK to commit with comment:
- Prevent shared Interrupts from other devices causing crash on device free.
(Analysis:
the crash was induced when the usb interrupt was still reached to snd_es1968_interrupt:
the value "event = inb(chip->io_port + 0x1A)" will possibly be != 0 cause the device went into high Z state, so snd_es1968_interrupt falsely tries to handle the alien interrupt....
by telling kernel that the module doesn't handle interrupts any more before switching the device into powersave mode we keep the system sane. or so....)
thanks,
Karsten
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND
At Tue, 15 Jun 2004 00:50:59 +0200,
Quoted 4 lines · Karsten Wiese
Am Montag 14 Juni 2004 15:39 schrieb Takashi Iwai:
Quoted 1 line
At Sun, 13 Jun 2004 20:23:48 +0200,
This patch keeps the "
snd_es1968_set_acpi(chip, ACPI_D3);":
(snip)
Quoted 5 lines
I think its OK to commit with comment:
- Prevent shared Interrupts from other devices causing crash on device free.
Quoted 9 lines
(Analysis:
the crash was induced when the usb interrupt was still reached tosnd_es1968_interrupt:
the value "event =inb(chip->io_port + 0x1A)" will possibly be != 0 cause the device went into high Z state, sosnd_es1968_interruptfalsely tries to handle the alien interrupt....
by telling kernel that the module doesn't handle interrupts any more before switching the device into powersave mode we keep the system sane. or so....)
Then we should move free_irq() itself before releasing other resources. calling snd_es1968_set_acpi() after release io's is invalid.
How about the attached patch?
Takashi
Index: alsa-kernel/pci/es1968.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/pci/es1968.c,v retrieving revision 1.66
pci/es1968.c +2 -2
@@ -2470,6 +2470,8 @@outw (0 , chip->io_port +ESM_PORT_HOST_IRQ );/* disable IRQ */ } +if (chip->irq >=0 ) +free_irq (chip->irq, (void *)chip);#ifdef SUPPORT_JOYSTICK if (chip->res_joystick) {gameport_unregister_port (&chip->gameport);
@@ -2484,8 +2486,6 @@release_resource (chip->res_io_port);kfree_nocheck (chip->res_io_port); } -if (chip->irq >=0 ) -free_irq (chip->irq, (void *)chip);snd_magic_kfree (chip);return 0 ; }
Am Dienstag 15 Juni 2004 13:04 schrieb Takashi Iwai:
Quoted 25 lines
At Tue, 15 Jun 2004 00:50:59 +0200,
Quoted 4 lines · Karsten Wiese
Am Montag 14 Juni 2004 15:39 schrieb Takashi Iwai:
Quoted 1 line
At Sun, 13 Jun 2004 20:23:48 +0200,
This patch keeps the "
snd_es1968_set_acpi(chip, ACPI_D3);":(snip)
Quoted 5 lines
I think its OK to commit with comment:
- Prevent shared Interrupts from other devices causing crash on device free.
Quoted 9 lines
(Analysis:
the crash was induced when the usb interrupt was still reached tosnd_es1968_interrupt:
the value "event =inb(chip->io_port + 0x1A)" will possibly be != 0 cause the device went into high Z state, sosnd_es1968_interruptfalsely tries to handle the alien interrupt....
by telling kernel that the module doesn't handle interrupts any more before switching the device into powersave mode we keep the system sane. or so....)
Quoted 5 lines
Then we should move
free_irq()itself before releasing other resources. callingsnd_es1968_set_acpi()after release io's is invalid.How about the attached patch?
Agreed. Works fine here.
Karsten
-------------------------------------------------------
This SF.Net email is sponsored by The 2004 JavaOne(SM) Conference Learn from the experts at JavaOne(SM), Sun's Worldwide Java Developer Conference, June 28 - July 1 at the Moscone Center in San Francisco, CA REGISTER AND SAVE! http://java.sun.com/javaone/sf Priority Code NWMGYKND