Strange things with via82xx
hello,
i have a K8V Deluxe Asus MB, with an AMD64 and 2.6.7 kernel. on the motherboard there are 3 jacks:
red lite green dark green
O O O
the mb manual says that red is "Microphone jack", lite green "Out Jack" and dark green "In Jack".
The very strange thing is this:
when using linux OSS or WinXP 32bits (if i remember correctly, as i deleted it :-) ), to listen audio i have to connect the loudspeakers
to the red "Microphone jack" (!!!).
When using FreeBSD 32bits (OSS) or ALSA i have to connect the loudspeakers to the light green "Out Jack".
This looks very strange!
Further, when using WinXP, linux OSS or FreeBSD i get a MUCH better quality than with ALSA (cshhhhhhhhhhhhhhhhh).
Of course i tried dxs_support=0,1,2,3,4 but the sound quality do not changes. Any idea? Thanks.
my lspci via entry is:
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 60)
Subsystem: Asustek Computer, Inc.: Unknown device 80b0
Flags: medium devsel, IRQ 5
I/O ports at c800 [size=256]
Capabilities: [c0] Power Management version 2
Signature · 13 lines
Best Regards Maurizio Monge Please CC me to monge(at)sns(dot)it as i'm not subscribed. "..the triumph of evil is for good men to do nothing." (Edmond Burke) ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 4 lines · Maurizio Monge
when using linux OSS or WinXP 32bits (if i remember correctly, as i deleted it :-) ), to listen audio i have to connect the loudspeakers
to the red "Microphone jack" (!!!).
Quoted 8 lines
When using FreeBSD 32bits (OSS) or ALSA i have to connect the loudspeakers to the light green "Out Jack".
This looks very strange!
Further, when using WinXP, linux OSS or FreeBSD i get a MUCH better quality than with ALSA (cshhhhhhhhhhhhhhhhh).
Of course i tried dxs_support=0,1,2,3,4 but the sound quality do not changes.
What codec does your MB use? (see second line at the top of the alsamixer screen)
Regards,
Clemens
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 4 lines
What codec does your MB use? (see second line at the top of the alsamixer screen)
Alsamixer says:
Card: VIA 823x rev60
Chip: Analog Devices AD1980
Signature · 11 lines
Best Regards Maurizio Monge "..the triumph of evil is for good men to do nothing." (Edmond Burke) ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 4 lines · Maurizio Monge
Quoted 2 lines
What codec does your MB use? (see second line at the top of the alsamixer screen)
Chip: Analog Devices AD1980
The AD1980 allows to reconfigure some of its input/output jacks, see the controls "Exchange Front/Surround", "Surround Jack as Input" and "Center/LFE Jack as Input" in alsamixer.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Further, when using WinXP, linux OSS or FreeBSD i get a MUCH better quality than with ALSA (cshhhhhhhhhhhhhhhhh).
Maybe some input isn't muted in the mixer?
Does it happen when you run "aplay something.wav"?
Does it happen when you play a file that has a sample rate of 48 kHz?
Regards,
Clemens
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 5 lines
The AD1980 allows to reconfigure some of its input/output jacks, see the controls "Exchange Front/Surround", "Surround Jack as Input" and "Center/LFE Jack as Input" in alsamixer.
You're right, playing with those options i can exchange the outputs and use for instance the same jack a with oss, or with "Spread Front to Surround and Center/LFE" i can use both. Sorry, i should think before posting :-)
Quoted 4 lines
Maybe some input isn't muted in the mixer?
Does it happen when you run "aplay something.wav"?
Does it happen when you play a file that has a sample rate of 48 kHz?
Great!
Muting or not muting source input had no effect on the output quality, but resampling with sox to 48k made the sound ok. I found that it was a my bad mistake and i had a line in /etc/modprobe.conf that overrided the dxs_support to 1, even if i did modprobe snd-via82xx dxs_support=x :-) After removing the above line i found that alsa works great with any dxs_support except 1. Sorry for boring you since it was my mistake, but you may still be interested to know that my PCI ids work great (clean sound) with dxs_support=4.
Thanx.
Signature · 11 lines
Best Regards Maurizio Monge "..the triumph of evil is for good men to do nothing." (Edmond Burke) ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com