htb: class 10007 isn't work conserving ?!
I'm getting the following error/warning at some point in my config script, and I'm not sure which class it is referring to.
htb: class 10007 isn't work conserving ?!
I [think I] understand that htb is a non-work-conserving qdisc, and I [think I] have configured things so that every htb qdisc I instantiate limits the bandwidth, so I don't understand why this situation would invoke a warning message.
Also -- is there some way to correlate this identifier "10007" with a classid?
Thank you,
Glen Mabey
Signature · 8 lines
****************************************************************** Glen W. Mabey [email protected] http://mabeys.homelinux.com/glen/ ****************************************************************** _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Glen Mabey
I'm getting the following error/warning at some point in my config script, and I'm not sure which class it is referring to.
htb: class 10007 isn't work conserving ?!
What qdisc is attached to this class?
Quoted 12 lines
I [think I] understand that htb is a non-work-conserving qdisc, and I [think I] have configured things so that every htb qdisc I instantiate limits the bandwidth, so I don't understand why this situation would invoke a warning message.
Also -- is there some way to correlate this identifier "10007" with a classid?
Thank you,
Glen Mabey
Quoted 10 lines
--
******************************************************************
Glen W. Mabey
[email protected]
http://mabeys.homelinux.com/glen/
******************************************************************
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi all,
Our ISP has given us 5 static IP address plus one router IP address and I was wondering if I could get rid of their stupid EN5861 router and set up the linux machine to handle all the static addresses and routing. I figured I'd have to set up alises for other IP addresses eg ifconfig eth0:0 xx.xx.xx.193 but once I've done that I've found out I cant use ip route to configure it eg ip route add default dev eth0:0 table server. Whats the best way to go about this?
Cheers.
By the way I'm running redhat 9 with two adsl connections, on is a speedtouch USB modem and the other is the EN5861 router.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines · Catalin BOIE
Quoted 4 lines · Glen Mabey
I'm getting the following error/warning at some point in my config script, and I'm not sure which class it is referring to.
htb: class 10007 isn't work conserving ?!
What qdisc is attached to this class?
Yes, that's what I was trying to ask below. I'm still trying to figure out which class (in the <qdisc>:<classid> format) the error message is referring to.
So, since I'm not sure which class it is (and I have several htb qdiscs; oh, I just realized that I neglected to mention that I'm using HTB), I'm not sure which qdisc this refers to.
Quoted 7 lines
Quoted 7 lines
I [think I] understand that htb is a non-work-conserving qdisc, and I [think I] have configured things so that every htb qdisc I instantiate limits the bandwidth, so I don't understand why this situation would invoke a warning message.
Also -- is there some way to correlate this identifier "10007" with a classid?
I'm just starting back on working on this problem this morning, and I'll approach it via a process of elimination, but I just thought there surely must be some sort of deterministic mapping between the <qdisc>:<classid> label and this one given in the warning message.
Thank you --
Glen
Signature · 8 lines
****************************************************************** Glen W. Mabey [email protected] http://mabeys.homelinux.com/glen/ ****************************************************************** _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines
Our ISP has given us 5 static IP address plus one router IP address and I was wondering if I could get rid of their stupid EN5861 router and set up the linux machine to handle all the static addresses and routing. I figured I'd have to set up alises for other IP addresses eg ifconfig eth0:0 xx.xx.xx.193 but once I've done that I've found out I cant use ip route to configure it eg ip route add default dev eth0:0 table server. Whats the best way to go about this?
Quoted 6 lines
Cheers.
By the way I'm running redhat 9 with two adsl connections, on is a speedtouch USB modem and the other is the EN5861 router.
I'm not quite sure why you tagged this on to the end of a thread about htb classes? As a result many people may not even read your question...?
I have one of those EN5861 router things, and actually I find it pretty good. The biggest issue is that it's a bit of a timebomb, the powersupply dies after a few years, and unless you have a spare it's a bit of a weak link
Do you need to do some particularly advanced routing that's stopping you just using the en5861?
Good luck
Ed W
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines
Yes, that's what I was trying to ask below. I'm still trying to figure out which class (in the <qdisc>:<classid> format) the error message is referring to.
It's about class 1:7.
Quoted 20 lines
So, since I'm not sure which class it is (and I have several htb qdiscs; oh, I just realized that I neglected to mention that I'm using HTB), I'm not sure which qdisc this refers to.
Quoted 7 lines
Quoted 7 lines
I [think I] understand that htb is a non-work-conserving qdisc, and I [think I] have configured things so that every htb qdisc I instantiate limits the bandwidth, so I don't understand why this situation would invoke a warning message.
Also -- is there some way to correlate this identifier "10007" with a classid?
I'm just starting back on working on this problem this morning, and I'll approach it via a process of elimination, but I just thought there surely must be some sort of deterministic mapping between the <qdisc>:<classid> label and this one given in the warning message.
Thank you --
Glen
Quoted 7 lines
--
******************************************************************
Glen W. Mabey
[email protected]
http://mabeys.homelinux.com/glen/
******************************************************************
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/