missing statics in fusion
Subsystems (2)
PATCH 1/1 missing statics in fusion
drivers/message/fusion/mptbase.c +1 -1
@@ -3395,7 +3395,7 @@* @hd: Pointer to MPT_SCSI_HOST structure * @init: If set, initialize the spin lock. */ -int +static int initChainBuffers (MPT_ADAPTER *ioc) {u8 *mem;
drivers/message/fusion/mptctl.c +2 -2
@@ -2865,7 +2865,7 @@ };/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -int __init mptctl_init (void ) +static int __init mptctl_init (void ) {int err;int where =1 ;
@@ -2963,7 +2963,7 @@ }/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ -void mptctl_exit (void ) +static void __exit mptctl_exit(void) {misc_deregister (&mptctl_miscdev); printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n",
drivers/message/fusion/mptscsih.c +16 -14
@@ -178,7 +178,7 @@static int mptscsih_event_process (MPT_ADAPTER *ioc,EventNotificationReply_t *pEvReply);static void mptscsih_initTarget (MPT_SCSI_HOST *hd,int bus_id,int target_id,u8 lun,char *data,int dlen); -void mptscsih_setTargetNegoParms (MPT_SCSI_HOST *hd,VirtDevice *target,char byte56); +static void mptscsih_setTargetNegoParms (MPT_SCSI_HOST *hd,VirtDevice *target,char byte56);static void mptscsih_set_dvflags (MPT_SCSI_HOST *hd,SCSIIORequest_t *pReq);static void mptscsih_setDevicePage1Flags (u8 width,u8 factor,u8 offset,int *requestedPtr,int *configurationPtr,u8 flags);static void mptscsih_no_negotiate (MPT_SCSI_HOST *hd,int target_id);
@@ -1760,7 +1759,7 @@* * Returns pointer to buffer where information was written. */ -const char * +static const char *mptscsih_info (struct Scsi_Host *SChost) {MPT_SCSI_HOST *h;
@@ -1975,8 +1974,9 @@* hostno: scsi host number * func: if write = 1; if read = 0 */ -int mptscsih_proc_info (struct Scsi_Host *host,char *buffer,char **start,off_t offset, -int length,int func) +static int +mptscsih_proc_info (struct Scsi_Host *host,char *buffer,char **start, +off_t offset,int length,int func) {MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;MPT_ADAPTER *ioc = hd->ioc;
@@ -2010,7 +2010,7 @@* * Returns 0. (rtn value discarded by linux scsi mid-layer) */ -int +static int mptscsih_qcmd (struct scsi_cmnd *SCpnt,void (*done)(struct scsi_cmnd *)) {MPT_SCSI_HOST *hd;
@@ -2551,7 +2551,7 @@* * Returns SUCCESS or FAILED. */ -int +static int mptscsih_abort (struct scsi_cmnd * SCpnt) {MPT_SCSI_HOST *hd;
@@ -2653,7 +2653,7 @@* * Returns SUCCESS or FAILED. */ -int +static int mptscsih_dev_reset (struct scsi_cmnd * SCpnt) {MPT_SCSI_HOST *hd;
@@ -2708,7 +2708,7 @@* * Returns SUCCESS or FAILED. */ -int +static int mptscsih_bus_reset (struct scsi_cmnd * SCpnt) {MPT_SCSI_HOST *hd;
@@ -2760,7 +2760,7 @@* * Returns SUCCESS or FAILED. */ -int +static int mptscsih_host_reset (struct scsi_cmnd *SCpnt) {MPT_SCSI_HOST * hd;
@@ -2937,7 +2937,7 @@/* * This is anyones guess quite frankly. */ -int +static int mptscsih_bios_param (struct scsi_device * sdev,struct block_device *bdev,sector_t capacity,int geom[]) {
@@ -2984,7 +2984,7 @@* Return non-zero if allocation fails. * Init memory once per id (not LUN). */ -int +static int mptscsih_slave_alloc (struct scsi_device *device) {struct Scsi_Host *host = device->host;
@@ -3033,7 +3033,7 @@* OS entry point to allow for host driver to free allocated memory * Called if no device present or device being unloaded */ -void +static void mptscsih_slave_destroy (struct scsi_device *device) {struct Scsi_Host *host = device->host;
@@ -3098,7 +3098,7 @@* member to 1 if a device does not support Q tags. * Return non-zero if fails. */ -int +static int mptscsih_slave_configure (struct scsi_device *device) {struct Scsi_Host *sh = device->host;
@@ -3743,7 +3743,8 @@* the Inquiry data, adapter capabilities, and NVRAM settings. * */ -void mptscsih_setTargetNegoParms (MPT_SCSI_HOST *hd,VirtDevice *target,char byte56) +static void +mptscsih_setTargetNegoParms (MPT_SCSI_HOST *hd,VirtDevice *target,char byte56) {ScsiCfgData *pspi_data = &hd->ioc->spi_data;int id = (int ) target->target_id;