Skip to contentSkip to conversation

: Gateway Solo 250 nma2 - no soundcard detected

ALSA - driver 0000440 [email protected] 1 participant 1 message Aug 18, 2004

lore
Share & tools
lore
#0 lore raw

A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000440
======================================================================

Reported By:                thelight
Assigned To:                tiwai
======================================================================
Project:                    ALSA - driver
Bug ID:                     440
Category:                   PCI - nm256
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
Distribution:               Fedora Core 2
Kernel Version:             2.6.6-1.435.2.3
======================================================================
Date Submitted:             08-14-2004 19:38 CEST
Last Modified:              08-18-2004 15:37 CEST

======================================================================
Summary: Gateway Solo 250 nma2 - no soundcard detected
Description:
The laptops specs say it has a 'neomagic nma 2' sound card onboard. From what I can tell this is some sort of NeoMagic nm256 equivalent.

My main problem is that I simply get no sound. The fedora core 2 program system-config-soundcard doesnt actually detect a soundcard at all. Im using the 1.0.3 rpms of alsa which came with fedora.
======================================================================

----------------------------------------------------------------------
tiwai - 08-18-2004 11:59 CEST
----------------------------------------------------------------------
2.6 kernel can load the unused modules.
I guess the PCI id of your device isn't listed on the supported id table in nm256 driver.

Check it via lspci and try to add it to the pci_id table. (Note that this may likely cause hang-up :)

----------------------------------------------------------------------
thelight - 08-18-2004 15:37 CEST
----------------------------------------------------------------------
Ive looked through the output of lspci -vv and no sound device is actually listed there. The only output relating to neomagic is this which appears to be for video:

00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01) (prog-if 00 [VGA])
Subsystem: Neomagic Corporation MagicGraph 128XD
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 128 (4000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at fd000000 (32-bit, prefetchable)
        Region 1: Memory at fea00000 (32-bit, non-prefetchable) [size=2M]
        Region 2: Memory at fed00000 (32-bit, non-prefetchable) [size=1M]

Bug History
Date Modified Username Field Change
======================================================================

08-14-04 19:38 thelight       New Bug                                      
08-14-04 19:38 thelight       Distribution              => Fedora Core 2   
08-14-04 19:38 thelight       Kernel Version            => 2.6.6-1.435.2.3 
08-18-04 11:59 tiwai          Bugnote Added: 0001577                       
08-18-04 15:37 thelight       Bugnote Added: 0001582                       

======================================================================

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285