traffic shaping a box with vpn tunnels.
Greetings,
I've got a server with a bunch of vpn (openvpn) tunnels terminating on it. I'm trying to limit the total bandwidth the tunnels can use to 3mbit. So I applied a rule like this:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tc qdisc add dev eth0 root handle 1: htb default 90
tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbit burst 15k
# Default rule for eth0
tc class add dev eth0 parent 1:1 classid 1:90 htb rate 3mbit ceil 3mbit burst 15k
tc qdisc add dev eth0 parent 1:90 handle 90: sfq perturb 10
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
All traffic including tunnel traffic enters and leaves eth0. Hence I assumed this would work, even if there is lots of tun virtual interfaces. But I get the following error as soon as I apply this rule.
~~~
Aug 19 13:51:44 gw openvpn[4996]: write UDPv4 []: No buffer space available (code5) Aug 19 13:51:44 gw openvpn[5012]: write UDPv4 []: No buffer space available (code5) Aug 19 13:51:44 gw openvpn[5012]: write UDPv4 []: No buffer space available (code5) Aug 19 13:51:44 gw openvpn[3017]: write UDPv4 []: No buffer space available
(code5)
~~~
Searching archives I see that this usually means I have a crappy network card. I use an Intel onboard nic. Is this the cause of the problem ? Is it a crappy nic to use ? Or is it perhaps a problem between the buffering on the tunnel interfaces and the real interface ? or something ? Should I ignore the error or is it dropping packets ?
What can I do to resolve this problem ?
tx
e.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/