: Sound OK but w/o mixer
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000462
======================================================================
Reported By: equake
Assigned To:
======================================================================
Project: ALSA - driver Bug ID: 462 Category: PCI - via82xx Reproducibility: always Severity: major Priority: normal Status: new Distribution: Debian Unstable Kernel Version: 2.6.8 ====================================================================== Date Submitted: 08-23-2004 02:13 CEST Last Modified: 08-27-2004 02:59 CEST
======================================================================
Summary: Sound OK but w/o mixer
Description:
I have a Soyo SY-KT600 Dragon Plus v2.0 mother board, w/ the VIA 8233 chipset.
When I load the drivers, I can hear sound but everything that I change on alsamixergui simply have no effect. I can set Master Volume to ZERO and I still have the sound, at the same volume.
Any idea?
I've tried ac97_quirk from -1 to 4 and nothing.
# lspci -vv
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: Elitegroup Computer Systems: Unknown device a101
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 193
Region 0: I/O ports at c000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-# cat /proc/asound/card0/codec97#0/ac97#0-0 0-0/0: C-Media Electronics id 83
Revision : 0x01
Compat. Class : 0x03
Subsys. Vendor ID: 0xffff
Subsys. ID : 0xffff
Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=2 AMAP LDAC SDAC CDAC DSA=0 DRA
Extended status : SPCV LDAC SDAC CDAC
# cat /proc/asound/card0/codec97#0/ac97#0-0+regs 0:00 = 0000 0:02 = 1a1a 0:04 = 0000 0:06 = 0000 0:08 = 0000 0:0a = 801e 0:0c = 0000 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 0000 0:16 = 9f1f 0:18 = 0808 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0bc2 0:2a = 05f0 0:2c = 0000 0:2e = 0000 0:30 = 0000 0:32 = 0000 0:34 = 0000 0:36 = 8080 0:38 = 8080 0:3a = 2000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0004 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 3038 0:66 = 0016 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0030 0:74 = c000 0:76 = 393c 0:78 = 0000 0:7a = 0000 0:7c = 434d 0:7e = 4983
======================================================================
----------------------------------------------------------------------
tiwai - 08-25-2004 19:58 CEST
----------------------------------------------------------------------
It's a new AC97 codec from c-media. Unfortunately there is no proper datasheet with the register description.
But, c-media provided its own linux driver, and I could see some info from the source code.
Could you try the attached patch?
----------------------------------------------------------------------
equake - 08-27-2004 02:53 CEST
----------------------------------------------------------------------
I've applyed the patch and now I've lost the sound completly. Seems that the mixer is always muted now (no error messages when trying to play a sound).
----------------------------------------------------------------------
equake - 08-27-2004 02:59 CEST
----------------------------------------------------------------------
When I mute/unmutee the PCM channel I can hear a "click" on my speakers, so I think that the volume is at level 0 and not muted.
Bug History
Date Modified Username Field Change
======================================================================
08-23-04 02:13 equake New Bug 08-23-04 02:13 equake Distribution => Debian Unstable 08-23-04 02:13 equake Kernel Version => 2.6.8 08-25-04 19:58 tiwai Bugnote Added: 0001626 08-25-04 19:58 tiwai File Added: cm9761-add.dif 08-27-04 02:53 equake Bugnote Added: 0001640 08-27-04 02:59 equake Bugnote Added: 0001641
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285