Linux 2.6.8.1-ac1
I've posted up a 2.6.8.1-ac1. This is mostly aimed at people wanting to try the newer IDE stuff while I work on feeding it to Bartlomiej.
http://www.kernel.org/pub/linux/kernel/people/alan/2.6/linux-2.6/2.6.8.1/..
Change summary for Linux 2.6.8.1-ac1 versus 2.6.8.1
[ * = submitted to maintainer, + = submitted but needs more work ]
* Fix crash on boot or nonworking keyboard driver (Alan Cox)
with E750x based systems in SMP
* Fix timing violation in i8042 driver code (Alan Cox)
* Allow 3% slack for root in strict overcommit (Alan Cox)
* Add support for 16byte (GPRS) pcmcia serial cards (Alan Cox)
* Reformat buslogic ready for real fixing (indent)
* Support VLAN on 3c59x/3c90x hardware (Stefan de Konkink)
* Serial ATA reporting of ATA errors for real diagnostics (Alan Cox)
+ Fix IDE locking, /proc races and other uglies (Alan Cox)
+ Initial IT8212 IDE driver (Alan Cox)
+ IDE hotplug (controller level) (Alan Cox)
+ Fix IDE disk crash on bad geometry (Alan Cox)
+ Fix mishandling of pure LBA devices (Alan Cox)
+ Fix problems with non-decoded slaves (Alan Cox)
- Fix failure to handle large drives on ALi controllers (Alan Cox)
| Lost from 2.4-ac to 2.6.
- Initial code working at making jiffies removal easier (Alan Cox)
Am Tue, 31 Aug 2004 13:08:39 -0400 schrieb Alan Cox:
Quoted 4 lines
I've posted up a 2.6.8.1-ac1. This is mostly aimed at people wanting to try the newer IDE stuff while I work on feeding it to Bartlomiej.
http://www.kernel.org/pub/linux/kernel/people/alan/2.6/linux-2.6/2.6.8.1/..
Should be:
http://www.kernel.org/pub/linux/kernel/people/alan/linux-2.6/2.6.8/
Hi Alan,
I will try this patch on an IBM T41 Thinkpad, and I am interested in its IDE Hotplug functionality.
Will I be able to swap IDE devices in my ultrabay without using "idectl 1 rescan" (using this patch only) ?
Do I need any other special tool for ide hotswapping in this case? Or should I wait for IDE hotplug at the device level ?
Thanks,
Paul
Quoted 23 lines · Alan Cox
I've posted up a 2.6.8.1-ac1. This is mostly aimed at people wanting to try the newer IDE stuff while I work on feeding it to Bartlomiej.
http://www.kernel.org/pub/linux/kernel/people/alan/2.6/linux-2.6/2.6.8.1/..
Change summary for Linux 2.6.8.1-ac1 versus 2.6.8.1
[ * = submitted to maintainer, + = submitted but needs more work ]
* Fix crash on boot or nonworking keyboard driver (Alan Cox)
with E750x based systems in SMP* Fix timing violation in i8042 driver code (Alan Cox) * Allow 3% slack
for root in strict overcommit (Alan Cox) * Add support for 16byte (GPRS)
pcmcia serial cards (Alan Cox) * Reformat buslogic ready for real fixing
(indent) * Support VLAN on 3c59x/3c90x hardware (Stefan de Konkink) *
Serial ATA reporting of ATA errors for real diagnostics (Alan Cox) + Fix
IDE locking, /proc races and other uglies (Alan Cox) + Initial IT8212 IDE
driver (Alan Cox) + IDE hotplug (controller level) (Alan Cox) + Fix
IDE disk crash on bad geometry (Alan Cox) + Fix mishandling of pure LBA
devices (Alan Cox) + Fix problems with non-decoded slaves (Alan Cox) -
Fix failure to handle large drives on ALi controllers (Alan Cox)| Lost from 2.4-ac to 2.6.(quoted diff) +0
-1- Initial code working at making jiffies removal easier (Alan Cox)
Quoted 8 lines · Paul Ionescu
Hi Alan,
I will try this patch on an IBM T41 Thinkpad, and I am interested in its IDE Hotplug functionality.
Will I be able to swap IDE devices in my ultrabay without using "idectl 1 rescan" (using this patch only) ?
Do I need any other special tool for ide hotswapping in this case? Or should I wait for IDE hotplug at the device level ?
You need device level hotplug for the ultrabay drive rather than controller level. Thats next on the hit list after various other non IDE jobs.
Quoted 10 lines · Alan Cox
Quoted 8 lines · Paul Ionescu
Hi Alan,
I will try this patch on an IBM T41 Thinkpad, and I am interested in its IDE Hotplug functionality.
Will I be able to swap IDE devices in my ultrabay without using "idectl 1 rescan" (using this patch only) ?
Do I need any other special tool for ide hotswapping in this case? Or should I wait for IDE hotplug at the device level ?
Quoted 3 lines
You need device level hotplug for the ultrabay drive rather than controller level. Thats next on the hit list after various other non IDE jobs.
OK, thanks for the info.
I'll wait a little bit for that patch then.