Skip to contentSkip to conversation

announce hpet devices claimed

PATCH New Bjorn Helgaas 1 participant 1 message Sep 1, 2004

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 announce hpet devices claimed

I think the HPET driver should announce the hardware it claims. Here's a patch that prints this:

	hpet0: at MMIO 0xc0000ffffc002000, IRQs 74, 75, 76
	hpet0: 4ns tick, 3 64-bit timers
	hpet1: at MMIO 0xc0000ffffc082000, IRQs 77, 78, 79
	hpet1: 4ns tick, 3 64-bit timers

This has been acked by Bob. I haven't heard from Venkatesh.

Print basic information (MMIO address, IRQs used, tick rate, number of timers) when claiming an HPET device.

===== drivers/char/hpet.c 1.5 vs edited =====

drivers/char/hpet.c +13 -1
@@ -789,6 +789,7 @@
 	size_t siz;
 	struct hpet *hpet;
 	static struct hpets *last __initdata = (struct hpets *)0;
+	unsigned long ns;
 
 	/*
 	 * hpet_alloc can be called by platform dependent code.
@@ -840,6 +841,18 @@
 	hpetp->hp_period = (cap & HPET_COUNTER_CLK_PERIOD_MASK) >>
 	    HPET_COUNTER_CLK_PERIOD_SHIFT;
 
+	printk(KERN_INFO "hpet%d: at MMIO 0x%p, IRQ%s",
+		hpetp->hp_which, hpet, hpetp->hp_ntimer > 1 ? "s" : "");
+	for (i = 0; i < hpetp->hp_ntimer; i++)
+		printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
+	printk("\n");
+
+	ns = hpetp->hp_period;	/* femptoseconds, 10^-15 */
+	do_div(ns, 1000000);	/* convert to nanoseconds, 10^-9 */
+	printk(KERN_INFO "hpet%d: %ldns tick, %d %d-bit timers\n",
+		hpetp->hp_which, ns, hpetp->hp_ntimer,
+		cap & HPET_COUNTER_SIZE_MASK ? 64 : 32);
+
 	mcfg = readq(&hpet->hpet_config);
 	if ((mcfg & HPET_ENABLE_CNF_MASK) == 0) {
 		write_counter(0L, &hpet->hpet_mc);
@@ -946,7 +960,6 @@
 
 static struct acpi_driver hpet_acpi_driver __initdata = {
 	.name = "hpet",
-	.class = "",
 	.ids = "PNP0103",
 	.ops = {
 		.add = hpet_acpi_add,