Skip to contentSkip to conversation

Intel ICH - sound/pci/intel8x0.c

DISCUSSION Matthieu Castet 1 participant 1 message Sep 6, 2004

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines

I just spent a while looking at the code. The joystick driver doesn't need to exist. Instead the snd_intel8x0_probe() routine could have a loop that does pci_get_subsys() over the ID's in snd_intel8x0_joystick_ids[]. When it finds one, use the config space to enable the joystick/midiports. You can locate the ports since pci_get_subsys() returns the pci_dev* for the bridge device. Save the pci_dev* and set the ports back in snd_intel8x0_remove(). Don't forget to pci_put() the bridge device.

yes, that is done in hw_random and 8xx_tco for a long time...

Quoted 10 lines

This isn't a device driver for the bridge, we just want to locate it and flip some bits. Later on if a driver for the bridge get written it should support an API for setting these bits and the search loop can be removed.

All of these devices are listed as Intel LPC bridges:
2410, 2420, 2440, 244c, 2450, 2480, 2484, 24c0, 24cc, 24d0, 24dc, 25a1, 2640, 2641, 2642
I have a 24D0 which isn't in the driver list, this is probably why MIDI doesn't work on my system.

Also check that you pass the righ io port to the modules (the irq won't be use, it will use only polling mode )...

If you had enable pnpbios in your kernel, you could see your midi port with :
for i in /sys/bus/pnp/devices/* ; do if [ "$(<$i/id)" = "PNP0b006" ]; then cat $i/resources;cat $i/options; fi ; done

Matthieu