Skip to contentSkip to conversation

My U-boot problem

U-Boot-Users Chung Pham 2 participants 2 messages Sep 6, 2004

lore
Share & tools
lore

Chung Pham

author
#0 lore raw

Hi,

I have just started with U-boot. Can you help me this problem:

First I used TFTP command to load uImage for bootm, it' OK.
Second, I used "bootm" for boot Linux, but when it ran to these lines:

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0 Looking up port of RPC 100003/2 on 192.168.1.245

And it hang not continue.

Could you please tell me what is this problem?

Thank you for you help.

Chung Pham.

__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail

#1 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

I have just started with U-boot. Can you help me this problem:

This is the U-Boot-Users mailing list.

Quoted 7 lines

Second, I used "bootm" for boot Linux, but when it ran to these lines:

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0 Looking up port of RPC 100003/2 on 192.168.1.245

And it hang not continue.

And this is a Linux problem.

Quoted 1 line

Could you please tell me what is this problem?

You are off topic here.

But since you asked: check if your NFS server is working correctly, and if it can be accessed by the target (firewall, host access control files).

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
2000 pounds of chinese soup                               = 1 Won Ton