Skip to contentSkip to conversation

add PCI ROMs to sysfs

PATCH Applied Jon Smirl 3 participants 5 messages Sep 8, 2004 – Nov 5, 2004 PCI

lore
Share & tools
lore

Jon Smirl

author
#0 lore raw

Greg, are you going to send pci-sysfs-rom-22.patch upstream? Or do I need to do it, if so how? Jesse's objection turned out to be a problem in another piece of code.

=====
Jon Smirl
[email protected]

__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail

Exposes PCI ROMs via sysfs. Four new routines for drivers to use when accessing ROMs: pci_map_rom, pci_map_rom_copy, pci_unmap_rom, pci_remove_rom. Handles shadow ROMs for laptops that compress actual ROMs.

arch/i386/pci/fixup.c +38 -0
diff -Nru a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
@@ -255,3 +255,41 @@
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
 
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <[email protected]>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video 
+ * card will have it's BIOS copied to C0000 in system RAM. 
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ *
+ */static void __devinit pci_fixup_video(struct pci_dev *pdev)
+{
+	struct pci_dev *bridge;
+	struct pci_bus *bus;
+	u16 l;
+
+	if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+		return;
+
+	/* Is VGA routed to us? */
+	bus = pdev->bus;
+	while (bus) {
+		bridge = bus->self;
+		if (bridge) {
+			pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &l);
+			if (!(l & PCI_BRIDGE_CTL_VGA))
+				return;
+		}
+		bus = bus->parent;
+	}
+	pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
drivers/pci/Makefile +2 -1
diff -Nru a/drivers/pci/Makefile b/drivers/pci/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
-			names.o pci-driver.o search.o pci-sysfs.o
+			names.o pci-driver.o search.o pci-sysfs.o \
+			rom.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
 ifndef CONFIG_SPARC64
drivers/pci/pci-sysfs.c +93 -1

124 lines not on this page · raw message

drivers/pci/pci.h +3 -1
diff -Nru a/drivers/pci/pci.h b/drivers/pci/pci.h
@@ -2,7 +2,9 @@
 
 extern int pci_hotplug (struct device *dev, char **envp, int num_envp,
 			 char *buffer, int buffer_size);
-extern void pci_create_sysfs_dev_files(struct pci_dev *pdev);
+extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
+extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
+extern void pci_cleanup_rom(struct pci_dev *dev);
 extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 				  unsigned long size, unsigned long align,
 				  unsigned long min, unsigned int type_mask,
drivers/pci/probe.c +1 -1
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
@@ -170,7 +170,7 @@
 		if (sz && sz != 0xffffffff) {
 			sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);
 			if (sz) {
-				res->flags = (l & PCI_ROM_ADDRESS_ENABLE) |
+				res->flags = (l & IORESOURCE_ROM_ENABLE) |
 				  IORESOURCE_MEM | IORESOURCE_PREFETCH |
 				  IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
 				res->start = l & PCI_ROM_ADDRESS_MASK;
drivers/pci/remove.c +2 -0
diff -Nru a/drivers/pci/remove.c b/drivers/pci/remove.c
@@ -16,6 +16,7 @@
 
  	msi_remove_pci_irq_vectors(dev);
 
+	pci_cleanup_rom(dev);
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		struct resource *res = dev->resource + i;
 		if (res->parent)
@@ -26,6 +27,7 @@
 static void pci_destroy_dev(struct pci_dev *dev)
 {
 	pci_proc_detach_device(dev);
+	pci_remove_sysfs_dev_files(dev);
 	device_unregister(&dev->dev);
 
 	/* Remove the device from the device lists, and prevent any further
drivers/pci/rom.c new file +226 -0

226 lines not on this page · raw message

drivers/pci/setup-res.c +1 -1
diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
@@ -56,7 +56,7 @@
 	if (resno < 6) {
 		reg = PCI_BASE_ADDRESS_0 + 4 * resno;
 	} else if (resno == PCI_ROM_RESOURCE) {
-		new |= res->flags & PCI_ROM_ADDRESS_ENABLE;
+		new |= res->flags & IORESOURCE_ROM_ENABLE;
 		reg = dev->rom_base_reg;
 	} else {
 		/* Hmm, non-standard resource. */
include/linux/ioport.h +5 -0
diff -Nru a/include/linux/ioport.h b/include/linux/ioport.h
@@ -82,6 +82,11 @@
 #define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
 #define IORESOURCE_MEM_EXPANSIONROM	(1<<6)
 
+/* PCI ROM control bits (IORESOURCE_BITS) */
+#define IORESOURCE_ROM_ENABLE		(1<<0)	/* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
+#define IORESOURCE_ROM_SHADOW		(1<<1)	/* ROM is copy at C000:0 */
+#define IORESOURCE_ROM_COPY		(1<<2)	/* ROM is alloc'd copy, resource field overlaid */
+
 /* PC/ISA/whatever - the normal PC address spaces: IO and memory */
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
include/linux/pci.h +7 -0
diff -Nru a/include/linux/pci.h b/include/linux/pci.h
@@ -537,6 +537,7 @@
 	unsigned int	is_busmaster:1; /* device is busmaster */
 	
 	u32		saved_config_space[16]; /* config space saved at suspend time */
+	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
 #ifdef CONFIG_PCI_NAMES
 #define PCI_NAME_SIZE	96
 #define PCI_NAME_HALF	__stringify(43)	/* less than half to handle slop */
@@ -777,6 +778,12 @@
 int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_assign_resource(struct pci_dev *dev, int i);
+
+/* ROM control related routines */
+unsigned char *pci_map_rom(struct pci_dev *pdev, size_t *size);
+unsigned char *pci_map_rom_copy(struct pci_dev *pdev, size_t *size);
+void pci_unmap_rom(struct pci_dev *pdev, unsigned char *rom);
+void pci_remove_rom(struct pci_dev *pdev);
 
 /* Power management related routines */
 int pci_save_state(struct pci_dev *dev, u32 *buffer);
#1 lore raw
Quoted 2 lines · Jon Smirl

Greg, are you going to send pci-sysfs-rom-22.patch upstream? Or do I need to do it, if so how?

I'll do it. I'm behind in patches, as I've been on the road for a week. I'll get to it tommorrow.

Sorry for the delay.

thanks,

greg k-h

#2 lore raw
In reply to Jon Smirl
Quoted 3 lines · Jon Smirl

Greg, are you going to send pci-sysfs-rom-22.patch upstream? Or do I need to do it, if so how? Jesse's objection turned out to be a problem in another piece of code.

Ok, I've applied this to my kernel trees and it will show up in the next -mm release. Nice job everyone.

thanks,

greg k-h

#3 lore raw

Linus has requested that the sysfs rom attribute be changed to require enabling before it works. echo "0" to the attribute to disable, echoing anything else enables the rom output. The concern is that something like a file browser could inadvertently read the attribute and change the state of the hardware without the user's knowledge.

The attached patch includes the previous patch plus the enabling logic.

[root@smirl 0000:02:02.0]#
[root@smirl 0000:02:02.0]# cat rom
cat: rom: Invalid argument
[root@smirl 0000:02:02.0]# echo "1" >rom
[root@smirl 0000:02:02.0]# hexdump -C -n 20 rom

00000000  55 aa 60 e9 d6 01 00 00  00 00 00 00 00 00 00 00  |U.`.............|
00000010  00 00 00 00                                       |....|

00000014
[root@smirl 0000:02:02.0]# echo "0" >rom
[root@smirl 0000:02:02.0]# hexdump -C -n 20 rom
hexdump: rom: Invalid argument
[root@smirl 0000:02:02.0]#

Signature · 2 lines
Jon Smirl
[email protected]
arch/i386/pci/fixup.c +38 -0
diff -Nru a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
@@ -255,3 +255,41 @@
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
 
+/*
+ * Fixup to mark boot BIOS video selected by BIOS before it changes
+ *
+ * From information provided by "Jon Smirl" <[email protected]>
+ *
+ * The standard boot ROM sequence for an x86 machine uses the BIOS
+ * to select an initial video card for boot display. This boot video 
+ * card will have it's BIOS copied to C0000 in system RAM. 
+ * IORESOURCE_ROM_SHADOW is used to associate the boot video
+ * card with this copy. On laptops this copy has to be used since
+ * the main ROM may be compressed or combined with another image.
+ * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
+ * is marked here since the boot video device will be the only enabled
+ * video device at this point.
+ *
+ */static void __devinit pci_fixup_video(struct pci_dev *pdev)
+{
+	struct pci_dev *bridge;
+	struct pci_bus *bus;
+	u16 l;
+
+	if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+		return;
+
+	/* Is VGA routed to us? */
+	bus = pdev->bus;
+	while (bus) {
+		bridge = bus->self;
+		if (bridge) {
+			pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &l);
+			if (!(l & PCI_BRIDGE_CTL_VGA))
+				return;
+		}
+		bus = bus->parent;
+	}
+	pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
drivers/pci/Makefile +2 -1
diff -Nru a/drivers/pci/Makefile b/drivers/pci/Makefile
@@ -3,7 +3,8 @@
 #
 
 obj-y		+= access.o bus.o probe.o remove.o pci.o quirks.o \
-			names.o pci-driver.o search.o pci-sysfs.o
+			names.o pci-driver.o search.o pci-sysfs.o \
+			rom.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
 ifndef CONFIG_SPARC64
drivers/pci/pci-sysfs.c +119 -1

150 lines not on this page · raw message

drivers/pci/pci.h +3 -1
diff -Nru a/drivers/pci/pci.h b/drivers/pci/pci.h
@@ -2,7 +2,9 @@
 
 extern int pci_hotplug (struct device *dev, char **envp, int num_envp,
 			 char *buffer, int buffer_size);
-extern void pci_create_sysfs_dev_files(struct pci_dev *pdev);
+extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
+extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev);
+extern void pci_cleanup_rom(struct pci_dev *dev);
 extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 				  unsigned long size, unsigned long align,
 				  unsigned long min, unsigned int type_mask,
drivers/pci/probe.c +1 -1
diff -Nru a/drivers/pci/probe.c b/drivers/pci/probe.c
@@ -170,7 +170,7 @@
 		if (sz && sz != 0xffffffff) {
 			sz = pci_size(l, sz, PCI_ROM_ADDRESS_MASK);
 			if (sz) {
-				res->flags = (l & PCI_ROM_ADDRESS_ENABLE) |
+				res->flags = (l & IORESOURCE_ROM_ENABLE) |
 				  IORESOURCE_MEM | IORESOURCE_PREFETCH |
 				  IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
 				res->start = l & PCI_ROM_ADDRESS_MASK;
drivers/pci/remove.c +2 -0
diff -Nru a/drivers/pci/remove.c b/drivers/pci/remove.c
@@ -16,6 +16,7 @@
 
  	msi_remove_pci_irq_vectors(dev);
 
+	pci_cleanup_rom(dev);
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
 		struct resource *res = dev->resource + i;
 		if (res->parent)
@@ -26,6 +27,7 @@
 static void pci_destroy_dev(struct pci_dev *dev)
 {
 	pci_proc_detach_device(dev);
+	pci_remove_sysfs_dev_files(dev);
 	device_unregister(&dev->dev);
 
 	/* Remove the device from the device lists, and prevent any further
drivers/pci/rom.c new file +225 -0

225 lines not on this page · raw message

drivers/pci/setup-res.c +1 -1
diff -Nru a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
@@ -56,7 +56,7 @@
 	if (resno < 6) {
 		reg = PCI_BASE_ADDRESS_0 + 4 * resno;
 	} else if (resno == PCI_ROM_RESOURCE) {
-		new |= res->flags & PCI_ROM_ADDRESS_ENABLE;
+		new |= res->flags & IORESOURCE_ROM_ENABLE;
 		reg = dev->rom_base_reg;
 	} else {
 		/* Hmm, non-standard resource. */
include/linux/ioport.h +5 -0
diff -Nru a/include/linux/ioport.h b/include/linux/ioport.h
@@ -82,6 +82,11 @@
 #define IORESOURCE_MEM_SHADOWABLE	(1<<5)	/* dup: IORESOURCE_SHADOWABLE */
 #define IORESOURCE_MEM_EXPANSIONROM	(1<<6)
 
+/* PCI ROM control bits (IORESOURCE_BITS) */
+#define IORESOURCE_ROM_ENABLE		(1<<0)	/* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
+#define IORESOURCE_ROM_SHADOW		(1<<1)	/* ROM is copy at C000:0 */
+#define IORESOURCE_ROM_COPY		(1<<2)	/* ROM is alloc'd copy, resource field overlaid */
+
 /* PC/ISA/whatever - the normal PC address spaces: IO and memory */
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
include/linux/pci.h +8 -0
diff -Nru a/include/linux/pci.h b/include/linux/pci.h
@@ -537,6 +537,8 @@
 	unsigned int	is_busmaster:1; /* device is busmaster */
 	
 	u32		saved_config_space[16]; /* config space saved at suspend time */
+	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
+	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
 #ifdef CONFIG_PCI_NAMES
 #define PCI_NAME_SIZE	96
 #define PCI_NAME_HALF	__stringify(43)	/* less than half to handle slop */
@@ -777,6 +779,12 @@
 int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
 int pci_assign_resource(struct pci_dev *dev, int i);
+
+/* ROM control related routines */
+void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size);
+void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size);
+void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
+void pci_remove_rom(struct pci_dev *pdev);
 
 /* Power management related routines */
 int pci_save_state(struct pci_dev *dev, u32 *buffer);
Applied
#4 lore raw
Quoted 7 lines · Jon Smirl

Linus has requested that the sysfs rom attribute be changed to require enabling before it works. echo "0" to the attribute to disable, echoing anything else enables the rom output. The concern is that something like a file browser could inadvertently read the attribute and change the state of the hardware without the user's knowledge.

The attached patch includes the previous patch plus the enabling logic.

Applied, thanks.

greg k-h