Skip to contentSkip to conversation

Bug#271396: Kernel help typo

DISCUSSION maks attems 5 participants 6 messages Sep 13, 2004 – Sep 15, 2004 1 message not in the archive CPU frequency scaling framework

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive
Quoted 11 lines · Gavin Sandie

drivers/cpufreq/Kconfig

The help for CONFIG_CPU_FREQ_GOV_POWERSAVE contains a typo. It starts with 'Theis', I think this should be 'This'.

I have found a further two typos in the
drivers/cpufreq/Kconfig file.

The help section for CPU_FREQ_DEFAULT_GOV_USERSPACE and CPU_FREQ_GOV_USERSPACE both have contain 'programm' when I think this should read 'programme'.

belows patch corrects found issues.

drivers/cpufreq/Kconfig +3 -3
@@ -33,7 +33,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
 	help
 	  Use the CPUFreq governor 'userspace' as default. This allows
 	  you to set the CPU frequency manually or when an userspace 
-	  programm shall be able to set the CPU dynamically without having
+	  programme shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.
 
 endchoice
@@ -51,7 +51,7 @@ config CPU_FREQ_GOV_POWERSAVE
        tristate "'powersave' governor"
        depends on CPU_FREQ
        help
-	  Theis cpufreq governors set the frequency statically to the
+	  This cpufreq governors set the frequency statically to the
 	  lowest available CPU frequency.
 
 	  If in doubt, say Y.
@@ -61,7 +61,7 @@ config CPU_FREQ_GOV_USERSPACE
        depends on CPU_FREQ 
        help
 	  Enable this cpufreq governor when you either want to set the
-	  CPU frequency manually or when an userspace programm shall
+	  CPU frequency manually or when an userspace programme shall
           be able to set the CPU dynamically, like on LART 
 	  <http://www.lart.tudelft.nl/>
 

--
maks
kernel janitor http://janitor.kernelnewbies.org/

#2 lore raw

drivers/cpufreq/Kconfig config CPU_FREQ_DEFAULT_GOV_USERSPACE · line 36

Quoted 2 lines · On Mon, 13 Sep 2004 23:10:11 +0200 maks attems wrote:
drivers/cpufreq/Kconfig +1 -1
-	  programm shall be able to set the CPU dynamically without having
+	  programme shall be able to set the CPU dynamically without having

Mmmh, I would say "program"...

drivers/cpufreq/Kconfig config CPU_FREQ_GOV_POWERSAVE · line 54

Quoted 2 lines
drivers/cpufreq/Kconfig +1 -1
-	  Theis cpufreq governors set the frequency statically to the
+	  This cpufreq governors set the frequency statically to the

How many governors are explained in this sentence? Only one?
If this is the case, I would say
"This cpufreq governor sets the frequency statically to the"
^^^^ ^^^ ^^^

Signature · 4 lines
             |  GnuPG Key ID = DD6DFCF4 |  $ fortune
  Francesco  |        Key fingerprint = |  Q: What is purple
     Poli    | C979 F34B 27CE 5CD8 DC12 |     and commutes?
             | 31B5 78F4 279B DD6D FCF4 |  A: A boolean grape.

_______________________________________________
Cpufreq mailing list
[email protected]
http://www.linux.org.uk/mailman/listinfo/cpufreq

#3 lore raw
In reply to maks attems
Quoted 38 lines · maks attems
Quoted 11 lines · Gavin Sandie

drivers/cpufreq/Kconfig

The help for CONFIG_CPU_FREQ_GOV_POWERSAVE contains a typo. It starts with 'Theis', I think this should be 'This'.

I have found a further two typos in the
drivers/cpufreq/Kconfig file.

The help section for CPU_FREQ_DEFAULT_GOV_USERSPACE and CPU_FREQ_GOV_USERSPACE both have contain 'programm' when I think this should read 'programme'.

belows patch corrects found issues.

drivers/cpufreq/Kconfig +2 -2
@@ -33,7 +33,7 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
 	help
 	  Use the CPUFreq governor 'userspace' as default. This allows
 	  you to set the CPU frequency manually or when an userspace 
-	  programm shall be able to set the CPU dynamically without having
+	  programme shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.
 
 endchoice
@@ -51,7 +51,7 @@ config CPU_FREQ_GOV_POWERSAVE
        tristate "'powersave' governor"
        depends on CPU_FREQ
        help
-	  Theis cpufreq governors set the frequency statically to the
+	  This cpufreq governors set the frequency statically to the
 	  lowest available CPU frequency.
 
 	  If in doubt, say Y.

drivers/cpufreq/Kconfig config CPU_FREQ_GOV_USERSPACE · line 67

Quoted 8 lines
drivers/cpufreq/Kconfig +1 -1
@@ -61,7 +61,7 @@ config CPU_FREQ_GOV_USERSPACE
        depends on CPU_FREQ 
        help
 	  Enable this cpufreq governor when you either want to set the
-	  CPU frequency manually or when an userspace programm shall
+	  CPU frequency manually or when an userspace programme shall
           be able to set the CPU dynamically, like on LART 
 	  <http://www.lart.tudelft.nl/>
 

Already fixed up in cpufreq-bk. Matthew Wilcox forwarded me the debian bugmail yesterday.

Dave

#4 lore raw
In reply to maks attems

drivers/cpufreq/Kconfig config CPU_FREQ_DEFAULT_GOV_USERSPACE · line 37

Quoted 5 lines · maks attems
drivers/cpufreq/Kconfig +1 -1
 	  Use the CPUFreq governor 'userspace' as default. This allows
 	  you to set the CPU frequency manually or when an userspace 
-	  programm shall be able to set the CPU dynamically without having
+	  programme shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.

In British English, "programme" refers to a television schedule, "program" refers to something a computer runs, see:
http://www.chambersharrap.co.uk/chambers/chref/chref.py/main?query=programme&title=21st

Americans use "program" for everything, so using programme here is wrong for everyone ;-)

Signature · 6 lines
"Next the statesmen will invent cheap lies, putting the blame upon 
the nation that is attacked, and every man will be glad of those
conscience-soothing falsities, and will diligently study them, and refuse
to examine any refutations of them; and thus he will by and by convince 
himself that the war is just, and will thank God for the better sleep 
he enjoys after this process of grotesque self-deception." -- Mark Twain
#5 lore raw
Quoted 11 lines · Matthew Wilcox

drivers/cpufreq/Kconfig config CPU_FREQ_DEFAULT_GOV_USERSPACE · line 37

Quoted 5 lines · maks attems
drivers/cpufreq/Kconfig +1 -1
 	  Use the CPUFreq governor 'userspace' as default. This allows
 	  you to set the CPU frequency manually or when an userspace 
-	  programm shall be able to set the CPU dynamically without having
+	  programme shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.

In British English, "programme" refers to a television schedule, "program" refers to something a computer runs, see:
http://www.chambersharrap.co.uk/chambers/chref/chref.py/main?query=programme&title=21st

Quoted 2 lines

Americans use "program" for everything, so using programme here is wrong for everyone ;-)

'program' is what I plumped for too, and thats whats currently in cpufreq-bk.

Dave

#6 lore raw
In reply to Matthew Wilcox
Quoted 11 lines · Matthew Wilcox

drivers/cpufreq/Kconfig config CPU_FREQ_DEFAULT_GOV_USERSPACE · line 37

Quoted 5 lines · maks attems
drivers/cpufreq/Kconfig +1 -1
 	  Use the CPUFreq governor 'userspace' as default. This allows
 	  you to set the CPU frequency manually or when an userspace 
-	  programm shall be able to set the CPU dynamically without having
+	  programme shall be able to set the CPU dynamically without having
 	  to enable the userspace governor manually.

In British English, "programme" refers to a television schedule, "program" refers to something a computer runs, see:
http://www.chambersharrap.co.uk/chambers/chref/chref.py/main?query=programme&title=21st

Quoted 2 lines

Americans use "program" for everything, so using programme here is wrong for everyone ;-)

/me laughing

thanks for the explanation, my french mother tongue probably agreed to aboves change :-)

--
maks
kernel janitor http://janitor.kernelnewbies.org/