Calling syscalls from x86-64 kernel results in a crash on Opteron machines
Quoted 13 lines
Subject: Calling syscalls from x86-64 kernel results in a crash on Opteron machines
Date: Mon, 13 Sep 2004 17:04:17 +0300
From: Constantine Gavrilov <[email protected]>
To: [email protected], [email protected]Hello:
We have a piece of kernel code that calls some system calls in kernel context (from a process with mm and a daemonized kernel thread that does not have mm). This works fine on IA64 and i386 architectures.
..............
Quoted 5 lines
Attached please find a test module that tries to call the
umask()(JUST TO DEMONSTRATE a problem) via the syscall machanism. Both methods (the_syscall1()marco and GLIBCINLINE_SYCALL()were used.
I forgot to attach a header file with glibc version of syscall inline implementation.
Signature · 8 lines
---------------------------------------- Constantine Gavrilov Kernel Developer Qlusters Software Ltd 1 Azrieli Center, Tel-Aviv Phone: +972-3-6081977 Fax: +972-3-6081841 ----------------------------------------
#ifndef _GSYSCALL_H_
#define _GSYSCALL_H_
#define __set_errno(Val) errno = (Val)
#undef INLINE_SYSCALL
#define INLINE_SYSCALL(name, nr, args...) \
({ \
unsigned long resultvar = INTERNAL_SYSCALL (name, , nr, args); \
if (__builtin_expect (INTERNAL_SYSCALL_ERROR_P (resultvar, ), 0)) \
{ \
__set_errno (INTERNAL_SYSCALL_ERRNO (resultvar, )); \
resultvar = (unsigned long) -1; \
} \
(long) resultvar; })#undef INTERNAL_SYSCALL_DECL
#define INTERNAL_SYSCALL_DECL(err) do { } while (0)
#undef INTERNAL_SYSCALL
#define INTERNAL_SYSCALL(name, err, nr, args...) \
({ \
unsigned long resultvar; \
LOAD_ARGS_##nr (args) \
asm volatile ( \
"movq %1, %%rax\n\t" \
"syscall\n\t" \
: "=a" (resultvar) \
: "i" (__NR_##name) ASM_ARGS_##nr : "memory", "cc", "r11", "cx"); \
(long) resultvar; })#undef INTERNAL_SYSCALL_ERROR_P
#define INTERNAL_SYSCALL_ERROR_P(val, err) \
((unsigned long) (val) >= -4095L)
#undef INTERNAL_SYSCALL_ERRNO
#define INTERNAL_SYSCALL_ERRNO(val, err) (-(val))
#define LOAD_ARGS_0()
#define ASM_ARGS_0
#define LOAD_ARGS_1(a1) \
register long int _a1 asm ("rdi") = (long) (a1); \
LOAD_ARGS_0 ()
#define ASM_ARGS_1 ASM_ARGS_0, "r" (_a1)
#define LOAD_ARGS_2(a1, a2) \
register long int _a2 asm ("rsi") = (long) (a2); \
LOAD_ARGS_1 (a1)
#define ASM_ARGS_2 ASM_ARGS_1, "r" (_a2)
#define LOAD_ARGS_3(a1, a2, a3) \
register long int _a3 asm ("rdx") = (long) (a3); \
LOAD_ARGS_2 (a1, a2)
#define ASM_ARGS_3 ASM_ARGS_2, "r" (_a3)
#define LOAD_ARGS_4(a1, a2, a3, a4) \
register long int _a4 asm ("r10") = (long) (a4); \
LOAD_ARGS_3 (a1, a2, a3)
#define ASM_ARGS_4 ASM_ARGS_3, "r" (_a4)
#define LOAD_ARGS_5(a1, a2, a3, a4, a5) \
register long int _a5 asm ("r8") = (long) (a5); \
LOAD_ARGS_4 (a1, a2, a3, a4)
#define ASM_ARGS_5 ASM_ARGS_4, "r" (_a5)
#define LOAD_ARGS_6(a1, a2, a3, a4, a5, a6) \
register long int _a6 asm ("r9") = (long) (a6); \
LOAD_ARGS_5 (a1, a2, a3, a4, a5)
#define ASM_ARGS_6 ASM_ARGS_5, "r" (_a6)
#endif
Quoted 7 lines · Constantine Gavrilov
Quoted 7 lines
Subject: Calling syscalls from x86-64 kernel results in a crash on Opteron machines
Date: Mon, 13 Sep 2004 17:04:17 +0300
From: Constantine Gavrilov <[email protected]>
To: [email protected], [email protected]
Quoted 7 lines
Quoted 6 lines
Hello:
We have a piece of kernel code that calls some system calls in kernel context (from a process with mm and a daemonized kernel thread that does not have mm). This works fine on IA64 and i386 architectures.
..............
Okay, It's a real process that has its own context.
Quoted 7 lines
Quoted 6 lines
Attached please find a test module that tries to call the
umask()(JUST TO DEMONSTRATE a problem) via the syscall machanism. Both methods (the_syscall1()marco and GLIBCINLINE_SYCALL()were used.
You can't use the user-mode syscalls! You need to use the kernel procedures to which they trap (like sys_open(), etc.). The reason is that you are operating on the kernel stack, you then generate a trap for the system call, which starts over again on the kernel stack (overwriting your previous return addresses, etc.).
A kernel-mode daemon has a context of its own, but it shares kernel data and stack.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5570.56 BogoMips).
Note 96.31% of all statistics are fiction.