Skip to contentSkip to conversation

MPC8540 gigabit ethernet

U-Boot-Users Scott Harper 2 participants 3 messages Sep 14, 2004 – Sep 15, 2004 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hello,

We are having problem getting gigbit ethernet working with u-boot on our board. I suspect that we have a hardware problem but I am double checking to make sure that I am not missing anything.

u-boot with 8540ADS board and gigabit works fine.
u-boot with our 8540 board gigabit has checksum errors as seen by etherreal. our 8540 board 100Mbit works fine in all modes.

We are using the same PHY as the 8540ADS (Marvell 88E1011S)

Since 100Megabit works and Gigabit doesn't have I missed a configuration or is this really a hardware problem.

Scott

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

That was one of the first things we checked. It is now configured exactly the same as the ADS board. Still the same problems.

Thank you for you help.

Scott

Quoted 38 lines · Andy Fleming

One tricky thing about that Marvell PHY is the CONFIG pins, which set up a bunch of default values. The u-boot driver resets some of those settings (to make sure that all the supported speed and duplex options are advertised), but there are some settings which the driver doesn't bother to change. If one of those settings is screwed up, then strange things can happen.

So check the sanity of the settings. :)

Andy Fleming

Quoted 26 lines · Scott Harper

Hello,

We are having problem getting gigbit ethernet working with u-boot on our board. I suspect that we have a hardware problem but I am double checking to make sure that I am not missing anything.

u-boot with 8540ADS board and gigabit works fine. u-boot with our 8540 board gigabit has checksum errors as seen by etherreal. our 8540 board 100Mbit works fine in all modes.

We are using the same PHY as the 8540ADS (Marvell 88E1011S)

Since 100Megabit works and Gigabit doesn't have I missed a configuration or is this really a hardware problem.

Scott

-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

#3 lore raw

Does the driver report the speed properly?
Which version of the kernel are you using?
I'm happy to help, though right now it looks very much like a hardware problem. :(

Andy

Quoted 49 lines · Scott Harper

That was one of the first things we checked. It is now configured exactly the same as the ADS board. Still the same problems.

Thank you for you help.

Scott

Quoted 38 lines · Andy Fleming

One tricky thing about that Marvell PHY is the CONFIG pins, which set up a bunch of default values. The u-boot driver resets some of those settings (to make sure that all the supported speed and duplex options are advertised), but there are some settings which the driver doesn't bother to change. If one of those settings is screwed up, then strange things can happen.

So check the sanity of the settings. :)

Andy Fleming

Quoted 26 lines · Scott Harper

Hello,

We are having problem getting gigbit ethernet working with u-boot on our board. I suspect that we have a hardware problem but I am double checking to make sure that I am not missing anything.

u-boot with 8540ADS board and gigabit works fine. u-boot with our 8540 board gigabit has checksum errors as seen by etherreal. our 8540 board 100Mbit works fine in all modes.

We are using the same PHY as the 8540ADS (Marvell 88E1011S)

Since 100Megabit works and Gigabit doesn't have I missed a configuration or is this really a hardware problem.

Scott

-------------------------------------------------------
This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170 Project Admins to receive an Apple iPod Mini FREE for your judgement on who ports your project to Linux PPC the best. Sponsored by IBM.
Deadline: Sept. 13. Go here: http://sf.net/ppc_contest.php
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users