ondemand governor not working
Hi,
I just tried 2.6.9-rc2 and found out that ondemand governor is not working. Sampling rate is set to zero:
/sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate 0 /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate_max 0 /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate_min 0
This is what I've found out: powernow-k7 sets transition_latency to a very low value:
powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: FSB: 133.902 MHz powernow: Found PSB header at c00f0320 powernow: Table version: 0x12 powernow: Flags: 0x0 (Mobile voltage regulator) powernow: Settling Time: 100 microseconds. powernow: Has 1 PST tables. (Only dumping ones relevant to this CPU). powernow: PST:0 (@c00f0330) powernow: cpuid: 0x7a0 fsb: 133 maxFID: 0x16 startvid: 0xb powernow: FID: 0x12 (4.0x [535MHz]) VID: 0x13 (1.200V) powernow: FID: 0x6 (6.0x [803MHz]) VID: 0x13 (1.200V) powernow: FID: 0xa (8.0x [1071MHz]) VID: 0x13 (1.200V) powernow: FID: 0xe (10.0x [1339MHz]) VID: 0xe (1.300V) powernow: FID: 0x2 (12.0x [1606MHz]) VID: 0xc (1.400V) powernow: FID: 0x16 (14.0x [1874MHz]) VID: 0xb (1.450V) powernow: SGTC: 13333 powernow: Minimum speed 535 MHz. Maximum speed 1874 MHz.
powernow-k7.c:637:
policy->cpuinfo.transition_latency = 20 * latency / fsb;
transition_latency = 20 * 13333 / 133902 = (int)1.99 = 1
Since transition_latency is expressed in ns it seems to me a bit low, maybe it should be 1ms?
The ondemand governor then does this:
cpufreq_ondemand.c:350def_sampling_rate = (policy->cpuinfo.transition_latency / 1000) *
DEF_SAMPLING_RATE_LATENCY_MULTIPLIER;
transition_latency / 1000 is clearly zero.
Luca
Signature · 3 lines
Home: http://kronoz.cjb.net "La Via prosegue senza fine." Bilbo Baggins - Il Signore degli Anelli - J.R.R. Tolkien