IRQ blocking when reading audio CDs
Dear Jens (& Christoph),
on my media PC (a Pentium II 350 MHz running Debian Woody with Kernel 2.4.25), I have problems using LIRC 0.6.6 with a serial IR reveiver when at the same time some application (cdparanoia, xmms/Audio CD reader) is reading audio data from a CD.
After some testing and exploration of the LIRC source code, I figured out that during audio CD reading interrupts seem to be blocked for a longer time (in the order of milliseconds), while lirc_serial measures the exact time between two serial interrupts and thus relies on an accurate timing. In consequence, LIRC does not recognize the IR sequences, there are no errors reported. Assigning a high priority to the serial interrupt using "irq_tune" did not help.
Is there a way to make the audio CD read operations less blocking? Or does any of you know a different source of the problem I observed?
Thank you very much,
Gundolf
Quoted 15 lines · Gundolf Kiefer
Dear Jens (& Christoph),
on my media PC (a Pentium II 350 MHz running Debian Woody with Kernel 2.4.25), I have problems using LIRC 0.6.6 with a serial IR reveiver when at the same time some application (cdparanoia, xmms/Audio CD reader) is reading audio data from a CD.
After some testing and exploration of the LIRC source code, I figured out that during audio CD reading interrupts seem to be blocked for a longer time (in the order of milliseconds), while
lirc_serialmeasures the exact time between two serial interrupts and thus relies on an accurate timing. In consequence, LIRC does not recognize the IR sequences, there are no errors reported. Assigning a high priority to the serial interrupt using "irq_tune" did not help.
Quoted 2 lines
Is there a way to make the audio CD read operations less blocking? Or does any of you know a different source of the problem I observed?
Upgrade to 2.6, it can use DMA for cdda extraction. If you cannot for some reason, Andrew had an ide-cd hack to enable dma in 2.4 for this.
Signature · 1 line
Jens Axboe
Quoted 10 lines · Jens Axboe
Quoted 6 lines · Gundolf Kiefer
Dear Jens (& Christoph),
on my media PC (a Pentium II 350 MHz running Debian Woody with Kernel 2.4.25), I have problems using LIRC 0.6.6 with a serial IR reveiver when at the same time some application (cdparanoia, xmms/Audio CD reader) is reading audio data from a CD.
Upgrade to 2.6, it can use DMA for cdda extraction. If you cannot for some reason, Andrew had an ide-cd hack to enable dma in 2.4 for this.
Seems like it should also work in PIO mode as long as unmask_irq is set.
Lee
Ok, I applied Andrew Morton's updated CDROMREADAUDIO DMA patch from Jan 2003 (http://lwn.net/Articles/19386/) to kernel 2.4.25, and everything seems to work fine now.
Thanks, Jens & Lee!
Quoted 17 lines · On 2004.09.28 21:21 Lee Revell wrote:
Quoted 5 lines · Jens Axboe
Quoted 4 lines · Gundolf Kiefer
Dear Jens (& Christoph),
on my media PC (a Pentium II 350 MHz running Debian Woody with Kernel 2.4.25), I have problems using LIRC 0.6.6 with a serial IR reveiver when
at
Quoted 5 lines
Quoted 2 lines
the same time some application (cdparanoia, xmms/Audio CD reader) is reading audio data from a CD.
Upgrade to 2.6, it can use DMA for cdda extraction. If you cannot for some reason, Andrew had an ide-cd hack to enable dma in 2.4 for this.
Seems like it should also work in PIO mode as long as
unmask_irqis set.Lee