strange network slowness in 2.6 unless pingflooding
Subsystems (2)
Hi,
This is still happening. I ran the same set of tests on a totally different network, with my xircom realport ethernet card (tulip driver - 16bit) and from linux to linux and windows to linux. Scrolling through a message in mutt eventually slows down and if I lift my finger off the enter key whilst it's slow the scrolling keeps going, as if it was all bufferd. If I do a pingflood (ping -f) from a machine to my laptop it's all fine.
I am also now running 2.6.9-rc1-mm4.
Help? :/
----- Forwarded message from CaT <[email protected]> -----
Date: Thu, 19 Aug 2004 12:03:40 +1000
From: CaT <[email protected]>
To: [email protected]
Subject: Whacky 2.6 network behaviour
Organisation: Furball Inc.
X-Mailing-List: [email protected]
I have an SSH session across a 100mb network from my desktop to my laptop. It's mostly ok but when I scroll line-by-line on a message with mutt it can fo really fast for a bit and then slows down to almost a line per second and keeps going after I take my finger off the enter key.
If I pingflood the laptop from the desktop things improve drastically and I only get a few freezes here and there. If I pingflood with 60000 byte packets things get a little better but then a severe loss of pings occurs. Each time the pings are lost my SSH connection also freezes.
If I ping a different host from my desktop (like my gateway) I get no pingloss with 60000 byte packets (though this doesn't help with the scrolling issues. :)
If I ping my desktop from my laptop with 60000 byte packets, the freezes are totally gone and I get no pingloss. If I ping my gateway from my laptop with 60000 byte packets I also get no pingloss and the freezes are also gone.
My desktop is using kernel 2.6.7, my laptop 2.6.8.1 and the gw 2.4.27. Cards in use are: desktop: 3com 3c59x; laptop: e100 (intels); gw:
e100 (intels). CPUs are: desktop: P3 600; laptop: P3 700; gw: p3 500.
(Hmm. Spoke too soon. There is still SOME packet loss but it's more a freak thing rather then a repeated occurance - I've only seen it once for the last two cases and I've been flood pinging for the laptop for the majority of this message).
I'll be more then happy to do any debugging/diag but I need to know what is needed and, if need be, how to get it so if any help is requried please shout and I'll get on it ASAP.
Signature · 11 lines
Red herrings strewn hither and yon. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ ----- End forwarded message ----- -- Red herrings strewn hither and yon.
Quoted 10 lines · CaT
Hi,
This is still happening. I ran the same set of tests on a totally different network, with my xircom realport ethernet card (tulip driver - 16bit) and from linux to linux and windows to linux. Scrolling through a message in mutt eventually slows down and if I lift my finger off the enter key whilst it's slow the scrolling keeps going, as if it was all bufferd. If I do a pingflood (ping -f) from a machine to my laptop it's all fine.
Quoted 2 lines
I am also now running 2.6.9-rc1-mm4.
Have you tried FAQ:
echo 0 > /proc/sys/net/ipv4/tcp_window_scaling
- Arnaldo
Quoted 11 lines · Arnaldo Carvalho de Melo
Quoted 10 lines · CaT
Hi,
This is still happening. I ran the same set of tests on a totally different network, with my xircom realport ethernet card (tulip driver - 16bit) and from linux to linux and windows to linux. Scrolling through a message in mutt eventually slows down and if I lift my finger off the enter key whilst it's slow the scrolling keeps going, as if it was all bufferd. If I do a pingflood (ping -f) from a machine to my laptop it's all fine.
Quoted 5 lines
Quoted 1 line
I am also now running 2.6.9-rc1-mm4.
Have you tried FAQ:
echo 0 >
/proc/sys/net/ipv4/tcp_window_scaling
It does not help. Same problem as before.
Signature · 1 line
Red herrings strewn hither and yon.
David S. Miller
maintainerQuoted 1 line · On Tue, 28 Sep 2004 08:49:57 +1000 CaT <[email protected]> wrote:
It does not help. Same problem as before.
Please give us some exact specifics about your network setup so that someone can possibly reproduce your problem locally. In particular, if there are hubs or switches involved on your local network that might be getting the duplex wrong, or some NAT or firewall machines in the path in question, please specify their setup precisely.
Otherwise there is zero chance of this problem ever being fixes.
Quoted 7 lines · David S. Miller
In particular, if there are hubs or switches involved on your local network that might be getting the duplex wrong, or some NAT or firewall machines in the path in question, please specify their setup precisely.
Otherwise there is zero chance of this problem ever being fixes.
Well I was going to do a few more tests and send a nice email doing just that but in going through my package list with dpkg I spotted cpudyn and cpufreqd installed. I've uninstalled them and now I cannot reproduce the problem.
As such, and I hope I'm not speaking to you, it appears 'solved'. They must've been interfering with the network layer somehow (or something) and now that they are gone all's well.
My apologies if anyones time was wasted.
Signature · 1 line
Red herrings strewn hither and yon.