udev remove event not sent untill the device is closed
Hi,
I'm running 2.6.8.1 with udev-031. I have a usb2serial converter which has a udev rule to give it a persistent name in my dev tree. I want to run a script when the converter is attached, and another when the converter is removed.
I tried both the /etc/hotplug.d and /etc/dev.d methods to do this (I like the dev.d method better as I can use my persistent device name). Unfortunately I ran into problems.
I'm catching the tty event as it sets $DEVPATH to something useful (e.g. /devices/sys/class/tty/ttyUSB0). And then running a different script depending on $ACTION.
I made a short script to do this, and put it in /etc/dev.d/default/ttyUSB.dev:
#!/bin/sh
test "$1" != "tty" && exit
test "$ACTION" == "add" && /usr/local/bin/on
test "$ACTION" == "remove" && /usr/local/bin/off
(I removed the various error checking that actually makes sure the tty event in question was actually the serial converter, and not some other device.)
This works fine, I can add and remove the converter to my hearts content and both scripts run accordingly.
However, if I attach the device, open it with say a "cat /dev/ttyUSB0" and then remove the device. No tty events get sent untill I kill the cat.
I want to be able to run the script when I remove the converter. (I actually want the remove script to kill the process that has the device open.)
I found it hard to use the usb events because when they run, $DEVPATH no longer exists. Which means I have no idea which converter was removed.
(Can replies be CC'ed to me as I'm not subscribed. Thanks)
Regards
Signature · 5 lines
Tom PGP Fingerprint [DCCD 7DCB A74A 3E3B 60D5 DF4C FC1D 1ECA 68A7 0C48] PGP Publickey [http://www.stewarts.org.uk/public-key.asc] PGP ID [0x68A70C48]
Quoted 20 lines · Thomas Stewart
Hi,
I'm running 2.6.8.1 with udev-031. I have a usb2serial converter which has a udev rule to give it a persistent name in my dev tree. I want to run a script when the converter is attached, and another when the converter is removed.
I tried both the
/etc/hotplug.dand/etc/dev.dmethods to do this (I like the dev.d method better as I can use my persistent device name). Unfortunately I ran into problems.I'm catching the tty event as it sets $DEVPATH to something useful (e.g. /devices/sys/class/tty/ttyUSB0). And then running a different script depending on $ACTION.
I made a short script to do this, and put it in
/etc/dev.d/default/ttyUSB.dev:
#!/bin/sh
test "$1" != "tty" && exit
test "$ACTION" == "add" &&/usr/local/bin/on
test "$ACTION" == "remove" &&/usr/local/bin/off
Quoted 8 lines
(I removed the various error checking that actually makes sure the tty event in question was actually the serial converter, and not some other device.)
This works fine, I can add and remove the converter to my hearts content and both scripts run accordingly.
However, if I attach the device, open it with say a "cat
/dev/ttyUSB0" and then remove the device. No tty events get sent untill I kill the cat.
This is because the tty device remains until the last userspace process releases the device. You might want to trigger your script off of the removal of the USB device instead.
Hope this helps,
greg k-h
Quoted 7 lines · you
Quoted 2 lines · Thomas Stewart
However, if I attach the device, open it with say a "cat
/dev/ttyUSB0" and then remove the device. No tty events get sent untill I kill the cat.This is because the tty device remains until the last userspace process releases the device. You might want to trigger your script off of the removal of the USB device instead.
I tried that method instead and it works. Now that I think about it more it does make more sense.
For anyone else doing something similar this is what I ended up with
http://www.stewarts.org.uk/stuff/ttyUSB.hotplug not exactly elegant but it works.
Thanks
Signature · 5 lines
Tom PGP Fingerprint [DCCD 7DCB A74A 3E3B 60D5 DF4C FC1D 1ECA 68A7 0C48] PGP Publickey [http://www.stewarts.org.uk/public-key.asc] PGP ID [0x68A70C48]