Skip to contentSkip to conversation

the ppc405ep u-boot (with jffs2 configure) failed

U-Boot-Users Wolfgang Denk 1 participant 1 message Sep 28, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 10 lines · In message <[email protected]> you wrote:
Quoted 2 lines

How big is your U-Boot image?

after u-boot make, create 3 u-boot files,

no jffs2 with jffs2

u-boot.bin = 131071         131071  
u-boot     = 185893         204816
u-boot.srec= 395482         396146

Are you sure? Is this really 131071 bytes? That would mean that the last byte of flash does not get written to - it should be exactly 128 kB (also, this sounds too small to me; with a decent set of features U-boot will not fit in this image). Check your u-boot.map file and/or the output of objdump -h to make sure you don;t have any overlapping sections defined in your linker script.

And please keep the list Cc:ed.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"There is no distinctly American criminal class except Congress."
- Mark Twain