Skip to contentSkip to conversation

Building 2.6 cvs head on db1550

DISCUSSION Christian Hecimovic 3 participants 6 messages Oct 1, 2004 – Oct 14, 2004 MIPS

lore
Share & tools
lore
#0 lore raw

I'm having problems building 2.6 head from the linux-mips cvs. There were a number of build errors with the /arch/mips/config/db1550-defconfig file. Eventually, it built with a number of fixes. Here's the diff:

Index: arch/mips/Kconfig
===================================================================
RCS file: /home/cvs/linux/arch/mips/Kconfig,v
retrieving revision 1.96
diff -r1.96 Kconfig
583a584

Quoted 1 line

select DMA_NONCOHERENT

Index: arch/mips/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips/Makefile,v
retrieving revision 1.176
diff -r1.176 Makefile
19c19
< 32bit-tool-prefix = mipsel-linux-
---

Quoted 1 line

32bit-tool-prefix = mipsel-unknown-linux-gnu-

Index: arch/mips/mm/ioremap.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mm/ioremap.c,v retrieving revision 1.19
diff -r1.19 ioremap.c
99a100,110

Quoted 9 lines

* * Allow physical addresses to be fixed up to help 36 bit
* * peripherals.
* */
static phys_t def_fixup_bigphys_addr(phys_t phys_addr, phys_t size)

{
	        return phys_addr;
}

phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size) =

def_fixup_bigphys_addr;

Quoted 2 lines

/*

121a133,134

Quoted 2 lines
	phys_addr = fixup_bigphys_addr(phys_addr, size);

Index: drivers/mtd/maps/db1550-flash.c
===================================================================
RCS file: /home/cvs/linux/drivers/mtd/maps/db1550-flash.c,v retrieving revision 1.1
diff -r1.1 db1550-flash.c
22c22
< #include <asm/au1000.h>
---

Quoted 1 line

#include <asm/mach-au1x00/au1000.h>

Index: drivers/pcmcia/Makefile
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/Makefile,v retrieving revision 1.34
diff -r1.34 Makefile
46a47

Quoted 1 line

au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o

Index: drivers/pcmcia/au1000_generic.c
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.c,v retrieving revision 1.14
diff -r1.14 au1000_generic.c
80c80
< #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) ||

defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) 152,153d151
< printk(KERN_DEBUG, "%s initializing socket %u\n", __FUNCTION__, skt->nr);
<
315,316d312
< printk(KERN_ERR, "%smap (%d) out of range\n",
< __FUNCTION__, map->map);
339,340d334
< printk(KERN_ERR, "%s map (%d) out of range\n",
< __FUNCTION__, map->map);
353c347
< map->sys_start = skt->phys_attr + map->card_start;
---

Quoted 1 line
		map->static_start = skt->phys_attr + map->card_start;

356c350
< map->sys_start = skt->phys_mem + map->card_start;
---

Quoted 1 line
		map->static_start = skt->phys_mem + map->card_start;

359,361c353,354
< map->sys_stop=map->sys_start+MAP_SIZE;
< debug(4, "set_mem_map %d start %Lx stop %Lx card_start %x\n",
< map->map, map->sys_start, map->sys_stop,
---

Quoted 2 lines
	debug(4, "set_mem_map %d start %Lx card_start %x\n", 
			map->map, map->sys_static, 

Index: drivers/pcmcia/au1000_generic.h
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.h,v retrieving revision 1.1
diff -r1.1 au1000_generic.h
48c48
< #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) ||

defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
Index: include/asm-mips/bootinfo.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/bootinfo.h,v retrieving revision 1.75
diff -r1.75 bootinfo.h
177a178

Quoted 1 line

#define MACH_DB1550 9 /* Au1550-based eval board */

Index: include/asm-mips/serial.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/serial.h,v retrieving revision 1.59
diff -r1.59 serial.h
215c215
< .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS \
---

Quoted 1 line
      .irq = AU1550_UART3_INT,  .flags = STD_COM_FLAGS, \

After building and loading the kernel, it panics:

YAMON> go . idebus=50 root=/dev/hdg1
Linux version 2.6.9-rc2 (ajain@debianFAI) (gcc version 3.3.2) #3 Thu Sep 30 16:4
CPU revision is: 03030200
AMD Alchemy Au1550/Db1550 Board
(PRId 03030200) @ 396MHZ
BCLK switching enabled!
Determined physical RAM map: memory: 0c000000 @ 00000000 (usable) Built 1 zonelists
Kernel command line: idebus=50 root=/dev/hdg1 console=ttyS0,115200
ide_setup: idebus=50
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB 4-way, linesize 32 bytes.
PID hash table entries: 1024 (order: 10, 16384 bytes) calculating r4koff... 00060ae0(396000)
CPU frequency 396.00 MHz
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189952k/196608k available (2771k kernel code, 6524k reserved, 668k data)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Non-coherent PCI accesses enabled
Can't analyze prologue code at 803b373c
Linux Kernel Card Services
options: [pci]
Reserved instruction in kernel code in arch/mips/kernel/traps.c::do_ri, line 61:
Cpu 0

$ 0   : 00000000 80490000 fffffffa c000305c
$ 4   : 8048bad0 0000000f 803ca06c 00000030
$ 8   : 00000000 812c9078 00000001 00000001
$12   : 00000003 ffffffff 0000000a 00000000
$16   : 8048baf0 8048bad0 804766d0 00000000
$20   : 00000000 00000000 00000000 00000000
$24   : 00000010 812bf2c9
$28   : 811fe000 811fff10 00000000 80289ba4
Hi    : 08366dd9
Lo    : 1db6cb20
epc   : 80289adc zlib_inflateInit2_+0x60/0xf0     Not tainted
ra    : 80289ba4 zlib_inflateInit_+0x18/0x24
Status: 1000fc03    KERNEL EXL IE
Cause : 00800028
PrId  : 03030200
Process swapper (pid: 1, threadinfo=811fe000, task=811fd8b8)
Stack : 8048baf0 00000000 804766d0 00000000 8048baf0 00000000 80289ba4
8016766c
        00000000 00000000 00000000 80221f50 80228a88 8046b7cc 8046ad54
8046ad2c
        00000000 00000000 804765d4 8046b9f0 00000000 00000000 00000000
00000000
        8045d7c8 8045d7c8 80470e30 80467a54 00000000 00000000 803b6c7c
00000000
        00000000 8045d8b8 00000000 00000000 00000000 00000000 801006dc
00000000
        ...
Call Trace:
 [<80289ba4>] zlib_inflateInit_+0x18/0x24
 [<8016766c>] vmalloc+0x14/0x20
 [<80221f50>] init_inodecache+0x30/0x50
 [<80228a88>] cramfs_uncompress_init+0x84/0x9c
 [<8046b7cc>] journal_init_caches+0x2c/0x44
 [<8046ad54>] eventpoll_init+0xac/0xdc
 [<8046ad2c>] eventpoll_init+0x84/0xdc
 [<8046b9f0>] init_cramfs_fs+0x10/0x28
 [<8045d7c8>] do_initcalls+0x50/0x108
 [<8045d7c8>] do_initcalls+0x50/0x108
 [<80470e30>] sock_init+0x54/0x6c
 [<80467a54>] sysctl_init+0x28/0x34
 [<8045d8b8>] do_basic_setup+0x38/0x44
 [<801006dc>] init+0x3c/0x118
 [<80107cd4>] kernel_thread_helper+0x10/0x18
 [<80107cc4>] kernel_thread_helper+0x0/0x18
Code: 2463005c  ac83001c  ac800018 <ac600014> 8c82001c  04a0001c  ac40000c
24a
Kernel panic - not syncing: Attempted to kill init!

After fooling with make menuconfig (turned off 64 bit support, PCMCIA, NFS, etc.) I got it to the point where it would load, but then couldn't mount root from hdg1. It cannot seem to find the hard drive at all.

2.4.25 correctly boots and mounts root from the ide drive.

Has anyone gotten the 2.6 kernel from cvs head to boot on a db1550, and successfully mount root from an ide hard drive? If so, how?

Thanks in advance,

Christian

#1 lore raw
Quoted 11 lines · Christian Hecimovic

I'm having problems building 2.6 head from the linux-mips cvs. There were a number of build errors with the /arch/mips/config/db1550-defconfig file. Eventually, it built with a number of fixes. Here's the diff:

Index: arch/mips/Kconfig
===================================================================
RCS file: /home/cvs/linux/arch/mips/Kconfig,v
retrieving revision 1.96
diff -r1.96 Kconfig
583a584

Quoted 1 line

select DMA_NONCOHERENT

Read Documentation/SubmittingPatches (diff -up), please!

Quoted 9 lines

Index: arch/mips/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips/Makefile,v
retrieving revision 1.176
diff -r1.176 Makefile
19c19
< 32bit-tool-prefix = mipsel-linux-
---

Quoted 1 line

32bit-tool-prefix = mipsel-unknown-linux-gnu-

This is specific to your setup -- most people use the shorter form for
whatever reason (less typing, less disk space, etc.). You may invoke `make "CROSS_COMPILE=mipsel-unknown-linux-gnu-" <whatever>' for an override.

The rest is system-specific; I can't comment.

Maciej

#2 lore raw
In reply to Christian Hecimovic
Quoted 3 lines · Christian Hecimovic

I'm having problems building 2.6 head from the linux-mips cvs. There were a number of build errors with the /arch/mips/config/db1550-defconfig file. Eventually, it built with a number of fixes. Here's the diff:

I have fixes for all these problems and will push them this coming week.

<snip>

Quoted 81 lines

After building and loading the kernel, it panics:

YAMON> go . idebus=50 root=/dev/hdg1
Linux version 2.6.9-rc2 (ajain@debianFAI) (gcc version 3.3.2) #3 Thu Sep 30 16:4
CPU revision is: 03030200
AMD Alchemy Au1550/Db1550 Board
(PRId 03030200) @ 396MHZ
BCLK switching enabled!
Determined physical RAM map: memory: 0c000000 @ 00000000 (usable) Built 1 zonelists
Kernel command line: idebus=50 root=/dev/hdg1 console=ttyS0,115200
ide_setup: idebus=50
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB 4-way, linesize 32 bytes.
PID hash table entries: 1024 (order: 10, 16384 bytes)
calculating r4koff... 00060ae0(396000)
CPU frequency 396.00 MHz
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189952k/196608k available (2771k kernel code, 6524k reserved, 668k data)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Non-coherent PCI accesses enabled
Can't analyze prologue code at 803b373c
Linux Kernel Card Services
options: [pci]
Reserved instruction in kernel code in arch/mips/kernel/traps.c::do_ri, line 61:
Cpu 0

$ 0   : 00000000 80490000 fffffffa c000305c
$ 4   : 8048bad0 0000000f 803ca06c 00000030
$ 8   : 00000000 812c9078 00000001 00000001
$12   : 00000003 ffffffff 0000000a 00000000
$16   : 8048baf0 8048bad0 804766d0 00000000
$20   : 00000000 00000000 00000000 00000000
$24   : 00000010 812bf2c9
$28   : 811fe000 811fff10 00000000 80289ba4
Hi    : 08366dd9
Lo    : 1db6cb20
epc   : 80289adc zlib_inflateInit2_+0x60/0xf0     Not tainted
ra    : 80289ba4 zlib_inflateInit_+0x18/0x24
Status: 1000fc03    KERNEL EXL IE
Cause : 00800028
PrId  : 03030200
Process swapper (pid: 1, threadinfo=811fe000, task=811fd8b8)
Stack : 8048baf0 00000000 804766d0 00000000 8048baf0 00000000 80289ba4
8016766c
       00000000 00000000 00000000 80221f50 80228a88 8046b7cc 8046ad54
8046ad2c
       00000000 00000000 804765d4 8046b9f0 00000000 00000000 00000000
00000000
       8045d7c8 8045d7c8 80470e30 80467a54 00000000 00000000 803b6c7c
00000000
       00000000 8045d8b8 00000000 00000000 00000000 00000000 801006dc
00000000
       ...
Call Trace:
[<80289ba4>] zlib_inflateInit_+0x18/0x24
[<8016766c>] vmalloc+0x14/0x20
[<80221f50>] init_inodecache+0x30/0x50
[<80228a88>] cramfs_uncompress_init+0x84/0x9c
[<8046b7cc>] journal_init_caches+0x2c/0x44
[<8046ad54>] eventpoll_init+0xac/0xdc
[<8046ad2c>] eventpoll_init+0x84/0xdc
[<8046b9f0>] init_cramfs_fs+0x10/0x28
[<8045d7c8>] do_initcalls+0x50/0x108
[<8045d7c8>] do_initcalls+0x50/0x108
[<80470e30>] sock_init+0x54/0x6c
[<80467a54>] sysctl_init+0x28/0x34
[<8045d8b8>] do_basic_setup+0x38/0x44
[<801006dc>] init+0x3c/0x118
[<80107cd4>] kernel_thread_helper+0x10/0x18
[<80107cc4>] kernel_thread_helper+0x0/0x18
Code: 2463005c  ac83001c  ac800018 <ac600014> 8c82001c  04a0001c  ac40000c
24a
Kernel panic - not syncing: Attempted to kill init!
Quoted 7 lines

After fooling with make menuconfig (turned off 64 bit support, PCMCIA, NFS, etc.) I got it to the point where it would load, but then couldn't mount root from hdg1. It cannot seem to find the hard drive at all.

2.4.25 correctly boots and mounts root from the ide drive.

Has anyone gotten the 2.6 kernel from cvs head to boot on a db1550, and successfully mount root from an ide hard drive? If so, how?

I recently replied to a similar email, right before I left for vacation.

The 2.6 kernel right now is missing the 36 bit support, and pcmcia, pci, and lcd chip select won't work. I'll send the patch next week. The rest of the problems you reported have been fixed in patches that are in my queue.

Pete

#3 lore raw
In reply to Christian Hecimovic

Christian,

Pull the latest bits from linux-mips and try again. Make sure you apply the patches in my ftp.linux-mips.org directory. Unfortunately there appears to be a bug in the hpt driver because other ide drivers work fine. I need to revisit this later. Also, the pcmcia driver for the db1550 isn't ready but I'll complete that shortly.

Pete

Quoted 234 lines · Christian Hecimovic

I'm having problems building 2.6 head from the linux-mips cvs. There were a number of build errors with the /arch/mips/config/db1550-defconfig file. Eventually, it built with a number of fixes. Here's the diff:

Index: arch/mips/Kconfig
===================================================================
RCS file: /home/cvs/linux/arch/mips/Kconfig,v
retrieving revision 1.96
diff -r1.96 Kconfig
583a584

Quoted 1 line

select DMA_NONCOHERENT

Index: arch/mips/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips/Makefile,v
retrieving revision 1.176
diff -r1.176 Makefile
19c19
< 32bit-tool-prefix = mipsel-linux-
---

Quoted 1 line

32bit-tool-prefix = mipsel-unknown-linux-gnu-

Index: arch/mips/mm/ioremap.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mm/ioremap.c,v retrieving revision 1.19
diff -r1.19 ioremap.c
99a100,110

Quoted 9 lines

* * Allow physical addresses to be fixed up to help 36 bit
* * peripherals.
* */
static phys_t def_fixup_bigphys_addr(phys_t phys_addr, phys_t size)

{
	        return phys_addr;
}

phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size) =

def_fixup_bigphys_addr;

Quoted 1 line

/*

121a133,134

Quoted 2 lines
	phys_addr = fixup_bigphys_addr(phys_addr, size);

Index: drivers/mtd/maps/db1550-flash.c
===================================================================
RCS file: /home/cvs/linux/drivers/mtd/maps/db1550-flash.c,v retrieving revision 1.1
diff -r1.1 db1550-flash.c
22c22
< #include <asm/au1000.h>
---

Quoted 1 line

#include <asm/mach-au1x00/au1000.h>

Index: drivers/pcmcia/Makefile
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/Makefile,v retrieving revision 1.34
diff -r1.34 Makefile
46a47

Quoted 1 line

au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o

Index: drivers/pcmcia/au1000_generic.c
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.c,v
retrieving revision 1.14
diff -r1.14 au1000_generic.c
80c80
< #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) ||

defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) 152,153d151
< printk(KERN_DEBUG, "%s initializing socket %u\n", __FUNCTION__, skt->nr);
< 315,316d312
< printk(KERN_ERR, "%smap (%d) out of range\n",
< __FUNCTION__, map->map);
339,340d334
< printk(KERN_ERR, "%s map (%d) out of range\n", < __FUNCTION__, map->map);
353c347
< map->sys_start = skt->phys_attr + map->card_start;
---

Quoted 1 line
		map->static_start = skt->phys_attr + map->card_start;

356c350
< map->sys_start = skt->phys_mem + map->card_start;
---

Quoted 1 line
		map->static_start = skt->phys_mem + map->card_start;

359,361c353,354
< map->sys_stop=map->sys_start+MAP_SIZE;
< debug(4, "set_mem_map %d start %Lx stop %Lx card_start %x\n", < map->map, map->sys_start, map->sys_stop,
---

Quoted 2 lines
	debug(4, "set_mem_map %d start %Lx card_start %x\n", 
			map->map, map->sys_static, 

Index: drivers/pcmcia/au1000_generic.h
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.h,v
retrieving revision 1.1
diff -r1.1 au1000_generic.h
48c48
< #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) ||

defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
Index: include/asm-mips/bootinfo.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/bootinfo.h,v retrieving revision 1.75
diff -r1.75 bootinfo.h
177a178

Quoted 1 line

#define MACH_DB1550 9 /* Au1550-based eval board */

Index: include/asm-mips/serial.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/serial.h,v retrieving revision 1.59
diff -r1.59 serial.h
215c215
< .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS \
---

Quoted 1 line
     .irq = AU1550_UART3_INT,  .flags = STD_COM_FLAGS, \

After building and loading the kernel, it panics:

YAMON> go . idebus=50 root=/dev/hdg1
Linux version 2.6.9-rc2 (ajain@debianFAI) (gcc version 3.3.2) #3 Thu Sep 30 16:4
CPU revision is: 03030200
AMD Alchemy Au1550/Db1550 Board
(PRId 03030200) @ 396MHZ
BCLK switching enabled!
Determined physical RAM map: memory: 0c000000 @ 00000000 (usable) Built 1 zonelists
Kernel command line: idebus=50 root=/dev/hdg1 console=ttyS0,115200
ide_setup: idebus=50
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB 4-way, linesize 32 bytes.
PID hash table entries: 1024 (order: 10, 16384 bytes)
calculating r4koff... 00060ae0(396000)
CPU frequency 396.00 MHz
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189952k/196608k available (2771k kernel code, 6524k reserved, 668k data)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Non-coherent PCI accesses enabled
Can't analyze prologue code at 803b373c
Linux Kernel Card Services
options: [pci]
Reserved instruction in kernel code in arch/mips/kernel/traps.c::do_ri, line 61:
Cpu 0

$ 0   : 00000000 80490000 fffffffa c000305c
$ 4   : 8048bad0 0000000f 803ca06c 00000030
$ 8   : 00000000 812c9078 00000001 00000001
$12   : 00000003 ffffffff 0000000a 00000000
$16   : 8048baf0 8048bad0 804766d0 00000000
$20   : 00000000 00000000 00000000 00000000
$24   : 00000010 812bf2c9
$28   : 811fe000 811fff10 00000000 80289ba4
Hi    : 08366dd9
Lo    : 1db6cb20
epc   : 80289adc zlib_inflateInit2_+0x60/0xf0     Not tainted
ra    : 80289ba4 zlib_inflateInit_+0x18/0x24
Status: 1000fc03    KERNEL EXL IE
Cause : 00800028
PrId  : 03030200
Process swapper (pid: 1, threadinfo=811fe000, task=811fd8b8)
Stack : 8048baf0 00000000 804766d0 00000000 8048baf0 00000000 80289ba4
8016766c
        00000000 00000000 00000000 80221f50 80228a88 8046b7cc 8046ad54
8046ad2c
        00000000 00000000 804765d4 8046b9f0 00000000 00000000 00000000
00000000
        8045d7c8 8045d7c8 80470e30 80467a54 00000000 00000000 803b6c7c
00000000
        00000000 8045d8b8 00000000 00000000 00000000 00000000 801006dc
00000000
        ...
Call Trace:
 [<80289ba4>] zlib_inflateInit_+0x18/0x24
 [<8016766c>] vmalloc+0x14/0x20
 [<80221f50>] init_inodecache+0x30/0x50
 [<80228a88>] cramfs_uncompress_init+0x84/0x9c
 [<8046b7cc>] journal_init_caches+0x2c/0x44
 [<8046ad54>] eventpoll_init+0xac/0xdc
 [<8046ad2c>] eventpoll_init+0x84/0xdc
 [<8046b9f0>] init_cramfs_fs+0x10/0x28
 [<8045d7c8>] do_initcalls+0x50/0x108
 [<8045d7c8>] do_initcalls+0x50/0x108
 [<80470e30>] sock_init+0x54/0x6c
 [<80467a54>] sysctl_init+0x28/0x34
 [<8045d8b8>] do_basic_setup+0x38/0x44
 [<801006dc>] init+0x3c/0x118
 [<80107cd4>] kernel_thread_helper+0x10/0x18
 [<80107cc4>] kernel_thread_helper+0x0/0x18
Code: 2463005c  ac83001c  ac800018 <ac600014> 8c82001c  04a0001c  ac40000c
24a
Kernel panic - not syncing: Attempted to kill init!

After fooling with make menuconfig (turned off 64 bit support, PCMCIA, NFS, etc.) I got it to the point where it would load, but then couldn't mount root from hdg1. It cannot seem to find the hard drive at all.

2.4.25 correctly boots and mounts root from the ide drive.

Has anyone gotten the 2.6 kernel from cvs head to boot on a db1550, and successfully mount root from an ide hard drive? If so, how?

Thanks in advance,

Christian

#4 lore raw

Hi Pete,

Thanks for the advice. Indeed, with the help of your patches, we are up and running.

As for your hpt driver problems, perhaps this patch will help you. It works for us, anyway ;)

Index: drivers/ide/pci/hpt366.c
===================================================================
RCS file: /home/cvs/linux/drivers/ide/pci/hpt366.c,v retrieving revision 1.26

ide/pci/hpt366.c 14 Oct 2004 10:14:37 -0000 renamed from ide/pci/hpt366.c 19 Sep 2004 12:30:10 -0000 1.26 +1 -1
diff -u -p -r1.26 hpt366.c
@@ -880,7 +880,7 @@ static int __devinit init_hpt37x(struct
                did = inb(dmabase + 0x22);
                rid = inb(dmabase + 0x28);
 
-               if((did == 4 && rid == 6) || (did == 5 && rid > 1))
+               if((did == 4 && rid == 6) || (did == 5 && rid > 1) || (did == 

7 && rid == 2))

                        is_372n = 1;
        }

Thanks,

Christian

Quoted 250 lines · Pete Popov

Christian,

Pull the latest bits from linux-mips and try again. Make sure you apply the patches in my ftp.linux-mips.org directory. Unfortunately there appears to be a bug in the hpt driver because other ide drivers work fine. I need to revisit this later. Also, the pcmcia driver for the db1550 isn't ready but I'll complete that shortly.

Pete

Quoted 239 lines · Christian Hecimovic

I'm having problems building 2.6 head from the linux-mips cvs. There were a number of build errors with the /arch/mips/config/db1550-defconfig file. Eventually, it built with a number of fixes. Here's the diff:

Index: arch/mips/Kconfig
===================================================================
RCS file: /home/cvs/linux/arch/mips/Kconfig,v
retrieving revision 1.96
diff -r1.96 Kconfig
583a584

Quoted 1 line

select DMA_NONCOHERENT

Index: arch/mips/Makefile
===================================================================
RCS file: /home/cvs/linux/arch/mips/Makefile,v
retrieving revision 1.176
diff -r1.176 Makefile
19c19
< 32bit-tool-prefix = mipsel-linux-
---

Quoted 1 line

32bit-tool-prefix = mipsel-unknown-linux-gnu-

Index: arch/mips/mm/ioremap.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mm/ioremap.c,v retrieving revision 1.19
diff -r1.19 ioremap.c
99a100,110

Quoted 9 lines

* * Allow physical addresses to be fixed up to help 36 bit
* * peripherals.
* */
static phys_t def_fixup_bigphys_addr(phys_t phys_addr, phys_t size)

{
	        return phys_addr;
}

phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size) =

def_fixup_bigphys_addr;

Quoted 1 line

/*

121a133,134

Quoted 1 line
	phys_addr = fixup_bigphys_addr(phys_addr, size);

Index: drivers/mtd/maps/db1550-flash.c
===================================================================
RCS file: /home/cvs/linux/drivers/mtd/maps/db1550-flash.c,v retrieving revision 1.1
diff -r1.1 db1550-flash.c
22c22
< #include <asm/au1000.h>
---

Quoted 1 line

#include <asm/mach-au1x00/au1000.h>

Index: drivers/pcmcia/Makefile
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/Makefile,v retrieving revision 1.34
diff -r1.34 Makefile
46a47

Quoted 1 line

au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o

Index: drivers/pcmcia/au1000_generic.c
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.c,v retrieving revision 1.14
diff -r1.14 au1000_generic.c
80c80
< #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) ||

defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) 152,153d151
< printk(KERN_DEBUG, "%s initializing socket %u\n", __FUNCTION__,
skt->nr); <
315,316d312
< printk(KERN_ERR, "%smap (%d) out of range\n",
< __FUNCTION__, map->map);
339,340d334
< printk(KERN_ERR, "%s map (%d) out of range\n",
< __FUNCTION__, map->map);
353c347
< map->sys_start = skt->phys_attr + map->card_start;
---

Quoted 1 line
		map->static_start = skt->phys_attr + map->card_start;

356c350
< map->sys_start = skt->phys_mem + map->card_start;
---

Quoted 1 line
		map->static_start = skt->phys_mem + map->card_start;

359,361c353,354
< map->sys_stop=map->sys_start+MAP_SIZE;
< debug(4, "set_mem_map %d start %Lx stop %Lx card_start %x\n",
< map->map, map->sys_start, map->sys_stop,
---

Quoted 2 lines
	debug(4, "set_mem_map %d start %Lx card_start %x\n",
			map->map, map->sys_static,

Index: drivers/pcmcia/au1000_generic.h
===================================================================
RCS file: /home/cvs/linux/drivers/pcmcia/au1000_generic.h,v retrieving revision 1.1
diff -r1.1 au1000_generic.h
48c48
< #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) ||

defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
Index: include/asm-mips/bootinfo.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/bootinfo.h,v retrieving revision 1.75
diff -r1.75 bootinfo.h
177a178

Quoted 1 line

#define MACH_DB1550 9 /* Au1550-based eval board */

Index: include/asm-mips/serial.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/serial.h,v retrieving revision 1.59
diff -r1.59 serial.h
215c215
< .irq = AU1550_UART3_INT, .flags = STD_COM_FLAGS \
---

Quoted 1 line
     .irq = AU1550_UART3_INT,  .flags = STD_COM_FLAGS, \

After building and loading the kernel, it panics:

YAMON> go . idebus=50 root=/dev/hdg1
Linux version 2.6.9-rc2 (ajain@debianFAI) (gcc version 3.3.2) #3 Thu Sep 30 16:4
CPU revision is: 03030200
AMD Alchemy Au1550/Db1550 Board
(PRId 03030200) @ 396MHZ
BCLK switching enabled!
Determined physical RAM map: memory: 0c000000 @ 00000000 (usable) Built 1 zonelists
Kernel command line: idebus=50 root=/dev/hdg1 console=ttyS0,115200
ide_setup: idebus=50
Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 16kB 4-way, linesize 32 bytes.
PID hash table entries: 1024 (order: 10, 16384 bytes) calculating r4koff... 00060ae0(396000)
CPU frequency 396.00 MHz
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 189952k/196608k available (2771k kernel code, 6524k reserved, 668k data)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Non-coherent PCI accesses enabled
Can't analyze prologue code at 803b373c
Linux Kernel Card Services
options: [pci]
Reserved instruction in kernel code in arch/mips/kernel/traps.c::do_ri, line 61:
Cpu 0

$ 0   : 00000000 80490000 fffffffa c000305c
$ 4   : 8048bad0 0000000f 803ca06c 00000030
$ 8   : 00000000 812c9078 00000001 00000001
$12   : 00000003 ffffffff 0000000a 00000000
$16   : 8048baf0 8048bad0 804766d0 00000000
$20   : 00000000 00000000 00000000 00000000
$24   : 00000010 812bf2c9
$28   : 811fe000 811fff10 00000000 80289ba4
Hi    : 08366dd9
Lo    : 1db6cb20
epc   : 80289adc zlib_inflateInit2_+0x60/0xf0     Not tainted
ra    : 80289ba4 zlib_inflateInit_+0x18/0x24
Status: 1000fc03    KERNEL EXL IE
Cause : 00800028
PrId  : 03030200
Process swapper (pid: 1, threadinfo=811fe000, task=811fd8b8)
Stack : 8048baf0 00000000 804766d0 00000000 8048baf0 00000000 80289ba4
8016766c
        00000000 00000000 00000000 80221f50 80228a88 8046b7cc 8046ad54
8046ad2c
        00000000 00000000 804765d4 8046b9f0 00000000 00000000 00000000
00000000
        8045d7c8 8045d7c8 80470e30 80467a54 00000000 00000000 803b6c7c
00000000
        00000000 8045d8b8 00000000 00000000 00000000 00000000 801006dc
00000000
        ...
Call Trace:
 [<80289ba4>] zlib_inflateInit_+0x18/0x24
 [<8016766c>] vmalloc+0x14/0x20
 [<80221f50>] init_inodecache+0x30/0x50
 [<80228a88>] cramfs_uncompress_init+0x84/0x9c
 [<8046b7cc>] journal_init_caches+0x2c/0x44
 [<8046ad54>] eventpoll_init+0xac/0xdc
 [<8046ad2c>] eventpoll_init+0x84/0xdc
 [<8046b9f0>] init_cramfs_fs+0x10/0x28
 [<8045d7c8>] do_initcalls+0x50/0x108
 [<8045d7c8>] do_initcalls+0x50/0x108
 [<80470e30>] sock_init+0x54/0x6c
 [<80467a54>] sysctl_init+0x28/0x34
 [<8045d8b8>] do_basic_setup+0x38/0x44
 [<801006dc>] init+0x3c/0x118
 [<80107cd4>] kernel_thread_helper+0x10/0x18
 [<80107cc4>] kernel_thread_helper+0x0/0x18
Code: 2463005c  ac83001c  ac800018 <ac600014> 8c82001c  04a0001c 
ac40000c 24a
Kernel panic - not syncing: Attempted to kill init!

After fooling with make menuconfig (turned off 64 bit support, PCMCIA, NFS, etc.) I got it to the point where it would load, but then couldn't mount root from hdg1. It cannot seem to find the hard drive at all.

2.4.25 correctly boots and mounts root from the ide drive.

Has anyone gotten the 2.6 kernel from cvs head to boot on a db1550, and successfully mount root from an ide hard drive? If so, how?

Thanks in advance,

Christian

#5 lore raw
Quoted 4 lines · --- Christian Hecimovic

Hi Pete,

Thanks for the advice. Indeed, with the help of your patches, we are up and running.

Good to hear. BTW, I'm pushing the patches but I'm not the only developer that's contributing to those patches.

Quoted 2 lines

As for your hpt driver problems, perhaps this patch will help you. It works for us, anyway ;)

:) That's the 2.4 patch I have in my linux-mips directory. For some reason it doesn't work for me in 2.6. Unfortunately it appears to be a timing issue of some sort because when I put some debug prints, the problem goes away. I'll debug it later ...

Pete

Quoted 3 lines

Index: drivers/ide/pci/hpt366.c

===================================================================

Quoted 41 lines

RCS file: /home/cvs/linux/drivers/ide/pci/hpt366.c,v retrieving revision 1.26
diff -u -p -r1.26 hpt366.c
--- drivers/ide/pci/hpt366.c 19 Sep 2004 12:30:10
-0000 1.26
+++ drivers/ide/pci/hpt366.c 14 Oct 2004 10:14:37
-0000

(quoted diff) +0 -0
@@ -880,7 +880,7 @@ static int __devinit

init_hpt37x(struct

                did = inb(dmabase + 0x22);
                rid = inb(dmabase + 0x28);

- if((did == 4 && rid == 6) || (did ==
5 && rid > 1))
+ if((did == 4 && rid == 6) || (did ==
5 && rid > 1) || (did ==
7 && rid == 2))

                        is_372n = 1;
        }

Thanks,

Christian

Quoted 3 lines · Pete Popov

Christian,

Pull the latest bits from linux-mips and try

again. Make sure you apply

Quoted 1 line

the patches in my ftp.linux-mips.org directory.

Unfortunately there

Quoted 1 line

appears to be a bug in the hpt driver because

other ide drivers work

Quoted 1 line

fine. I need to revisit this later. Also, the

pcmcia driver for the

Quoted 4 lines

db1550 isn't ready but I'll complete that shortly.

Pete

Quoted 11 lines
Quoted 2 lines
Quoted 1 line · Christian Hecimovic

I'm having problems building 2.6 head from the

linux-mips cvs. There were

Quoted 1 line
Quoted 1 line

a number of build errors with the

/arch/mips/config/db1550-defconfig

Quoted 1 line
Quoted 1 line

file. Eventually, it built with a number of

fixes. Here's the diff:

Quoted 3 lines
Quoted 3 lines

Index: arch/mips/Kconfig

===================================================================

Quoted 10 lines
Quoted 9 lines
Quoted 9 lines

RCS file: /home/cvs/linux/arch/mips/Kconfig,v
retrieving revision 1.96
diff -r1.96 Kconfig
583a584

Quoted 1 line

select DMA_NONCOHERENT

Index: arch/mips/Makefile

===================================================================

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines

RCS file: /home/cvs/linux/arch/mips/Makefile,v
retrieving revision 1.176
diff -r1.176 Makefile
19c19
< 32bit-tool-prefix = mipsel-linux-
---

Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Quoted 1 line

32bit-tool-prefix = mipsel-unknown-linux-gnu-

Index: arch/mips/mm/ioremap.c

===================================================================

Quoted 19 lines
Quoted 1 line
Quoted 1 line

RCS file:

/home/cvs/linux/arch/mips/mm/ioremap.c,v

Quoted 5 lines
Quoted 5 lines

retrieving revision 1.19
diff -r1.19 ioremap.c
99a100,110

Quoted 1 line

* * Allow physical addresses to be fixed up to

help 36 bit

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

* * peripherals.
* */
static phys_t def_fixup_bigphys_addr(phys_t

phys_addr, phys_t size)

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
{
	        return phys_addr;
}

phys_t (*fixup_bigphys_addr)(phys_t phys_addr,

phys_t size) =

Quoted 1 line
Quoted 1 line
Quoted 12 lines
Quoted 7 lines
Quoted 7 lines

def_fixup_bigphys_addr;

Quoted 1 line

/*

121a133,134

Quoted 1 line

phys_addr = fixup_bigphys_addr(phys_addr,

size);

Quoted 3 lines
Quoted 3 lines

Index: drivers/mtd/maps/db1550-flash.c

===================================================================

Quoted 13 lines
Quoted 1 line
Quoted 1 line

RCS file:

/home/cvs/linux/drivers/mtd/maps/db1550-flash.c,v

Quoted 10 lines
Quoted 10 lines

retrieving revision 1.1
diff -r1.1 db1550-flash.c
22c22
< #include <asm/au1000.h>
---

Quoted 1 line

#include <asm/mach-au1x00/au1000.h>

Index: drivers/pcmcia/Makefile

===================================================================

Quoted 12 lines
Quoted 1 line
Quoted 1 line

RCS file:

/home/cvs/linux/drivers/pcmcia/Makefile,v

Quoted 5 lines
Quoted 5 lines

retrieving revision 1.34
diff -r1.34 Makefile
46a47

Quoted 1 line

au1x00_ss-$(CONFIG_MIPS_DB1550) +=

au1000_db1x00.o

Quoted 3 lines
Quoted 3 lines

Index: drivers/pcmcia/au1000_generic.c

===================================================================

Quoted 46 lines
Quoted 1 line
Quoted 1 line

RCS file:

/home/cvs/linux/drivers/pcmcia/au1000_generic.c,v

Quoted 4 lines
Quoted 4 lines

retrieving revision 1.14
diff -r1.14 au1000_generic.c
80c80
< #elif defined(CONFIG_MIPS_DB1000) ||

defined(CONFIG_MIPS_DB1100) ||

Quoted 4 lines
Quoted 4 lines

defined(CONFIG_MIPS_DB1500)
---

Quoted 1 line

#elif defined(CONFIG_MIPS_DB1000) ||

defined(CONFIG_MIPS_DB1100) ||

Quoted 2 lines
Quoted 2 lines

defined(CONFIG_MIPS_DB1500) ||

defined(CONFIG_MIPS_DB1550)

Quoted 2 lines
Quoted 2 lines

152,153d151
< printk(KERN_DEBUG, "%s initializing socket

%u\n", __FUNCTION__,

Quoted 3 lines
Quoted 3 lines

skt->nr); <
315,316d312
< printk(KERN_ERR, "%smap (%d) out of

range\n",

Quoted 3 lines
Quoted 3 lines

< __FUNCTION__, map->map);
339,340d334
< printk(KERN_ERR, "%s map (%d) out of

range\n",

Quoted 3 lines
Quoted 3 lines

< __FUNCTION__, map->map);
353c347
< map->sys_start = skt->phys_attr +

map->card_start;

Quoted 3 lines
Quoted 3 lines

---

Quoted 1 line
		map->static_start = skt->phys_attr +

map->card_start;

Quoted 3 lines
Quoted 3 lines

356c350
< map->sys_start = skt->phys_mem +

map->card_start;

Quoted 3 lines
Quoted 3 lines

---

Quoted 1 line
		map->static_start = skt->phys_mem +

map->card_start;

Quoted 4 lines
Quoted 4 lines

359,361c353,354
< map->sys_stop=map->sys_start+MAP_SIZE;
< debug(4, "set_mem_map %d start %Lx stop %Lx

Quoted 11 lines

card_start %x\n",

Quoted 4 lines
Quoted 4 lines

< map->map, map->sys_start, map->sys_stop,
---

Quoted 1 line

debug(4, "set_mem_map %d start %Lx card_start

%x\n",

Quoted 4 lines
Quoted 4 lines
Quoted 1 line
			map->map, map->sys_static,

Index: drivers/pcmcia/au1000_generic.h

===================================================================

Quoted 3 lines
Quoted 1 line
Quoted 1 line

RCS file:

/home/cvs/linux/drivers/pcmcia/au1000_generic.h,v

=== message truncated ===