nforce2 bugs?
Quoted 9 lines · Alan Cox
Quoted 1 line · white phoenix
[x86] fix lockups with APIC support on nForce2
Looks reasonable (anyone from Nvidia care to ack any of these)
Quoted 2 lines
Add PCI quirk to disable Halt Disconnect and Stop Grant Disconnect (based on athcool program by Osamu Kayasono).
Is this always safe - if not why does the BIOS not do it.
An older Nvidia reference BIOS has a bug. Nvidia provided this information on it:
http://marc.theaimsgroup.com/?l=linux-kernel&m=108362246902784&w=2
A more appropriate patch was merged. It was similar to this:
http://marc.theaimsgroup.com/?l=linux-kernel&m=108362608309197&w=2
So disconnect lockups should not happen anymore. He may be hitting a rarer nforce2 bug.
For me, an issue with noise on the timer remains.
Quoted 3 lines · Ross Dickson
A couple of Skewing Mobos Involved:
Abit NF7-S V2.0 motherboard.
A7N8X Deluxe mobo/Athlon
Shuttle AN35N Ultra V1.1
I have not tried the newest BIOS release. I have the one that fixes disconnect timings.
Quoted 3 lines
Maybe they are using the same revision of non GPU nforce2 silicon? I personally never had any clock skew but I have only used Mobos with graphics onboard, several Albatron KM18G and an Epox 8RGA+
Well, my motherboard has no integrated GPU as well.
Quoted 2 lines · Andy Currid
In systems running in IOAPIC mode where this problem has been observed, is ACPI enabled?
I have ACPI enabled. I don't explicitly set acpi_skip_timer_override.
Jesse
bash-3.00$ cat /proc/interrupts
CPU0
0: 16741454 IO-APIC-edge timer 1: 9300 IO-APIC-edge i8042 7: 0 IO-APIC-edge parport0 8: 324750 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 14: 12284 IO-APIC-edge ide0 15: 11 IO-APIC-edge ide1 16: 92 IO-APIC-level aic7xxx 17: 6156 IO-APIC-level CMI8738 19: 290981 IO-APIC-level radeon@pci:0000:03:00.0 20: 2 IO-APIC-level ehci_hcd 21: 0 IO-APIC-level NVidia nForce2, ohci_hcd 22: 1925390 IO-APIC-level eth0, ohci_hcd NMI: 0 LOC: 16698953 ERR: 0 MIS: 0
shortened dmesg follows:
DMI 2.2 present.
Shuttle AN35N detected: BIOS IRQ0 pin2 override will be ignored
ACPI: RSDP (v000 Nvidia ) @ 0x000f6f70
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff7880
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
(cut)
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1