2.6.8: CDROM_SEND_PACKET ioctls failing as non-root on ide scsi drives
kernel 2.6.8. ioctl ("/dev/hdc", CDROM_SEND_PACKET, cmd)
commands that are failing as non-root, even when permission is granted rwxrwxrwx to /dev/hdc, are, according to some debug info added to k3b:
GET CONFIGURATION (46)
error code: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
and:
MODE SELECT (55)
error code: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0
the result is that k3b cannot determine that the drive exists, therefore it cannot use it even though cdrecord might actually work.
as root, the following errors occur:
MODE SELECT (46) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 26 ascq: 0 READ DVD STRUCTURE (ad) errorcode: 70 sense key: NOT READY (2) asc: 3a ascq: 0
presumably it can be concluded that the GET CONFIGURATION ioctl command is the one at fault.
... what gives?
l.
Signature · 7 lines
-- Truth, honesty and respect are rare commodities that all spring from the same well: Love. If you love yourself and everyone and everything around you, funnily and coincidentally enough, life gets a lot better. -- <a href="http://lkcl.net"> lkcl.net </a> <br /> <a href="mailto:[email protected]"> [email protected] </a> <br />
Quoted 1 line · Luke Kenneth Casson Leighton
kernel 2.6.8. ioctl ("
/dev/hdc",CDROM_SEND_PACKET, cmd)
please search the archives, this has been discussed extensively over the last month. frankly, I don't know how you were even able to miss it :)
Signature · 1 line
Jens Axboe
Quoted 5 lines · Jens Axboe
Quoted 1 line · Luke Kenneth Casson Leighton
kernel 2.6.8. ioctl ("
/dev/hdc",CDROM_SEND_PACKET, cmd)please search the archives, this has been discussed extensively over the last month. frankly, I don't know how you were even able to miss it :)
by not subscribing to the list, and searching for things as-and-when. ... i _did_ do a google search first, though, i promise!
"linux kernel cdrom ioctl CDROM_SEND_PACKET" gave this:
http://www.cs.helsinki.fi/linux/linux-kernel/2003-13/0617.html
which isn't exactly this month...
l.
Quoted 37 lines · Luke Kenneth Casson Leighton
kernel 2.6.8. ioctl ("
/dev/hdc",CDROM_SEND_PACKET, cmd)commands that are failing as non-root, even when permission is granted rwxrwxrwx to
/dev/hdc, are, according to some debug info added to k3b:GET CONFIGURATION (46)
error code: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0and:
MODE SELECT (55)
error code: 0
sense key: NO SENSE (2)
asc: 0
ascq: 0the result is that k3b cannot determine that the drive exists, therefore it cannot use it even though cdrecord might actually work.
as root, the following errors occur:
MODE SELECT (46) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 26 ascq: 0 READ DVD STRUCTURE (ad) errorcode: 70 sense key: NOT READY (2) asc: 3a ascq: 0
Quoted 4 lines
presumably it can be concluded that the GET CONFIGURATION ioctl command is the one at fault.
... what gives?
CDROM_SEND_PACKET calls down to sg_io, which calls verify_command, which will not permit anyone but root to use any unrecognised commands. GET CONFIGURATION does not seems to be one of those recognised. This check for unrecognised commands is a fairly recent addition, IIRC.
Quoted 5 lines · Sean Neakums
CDROM_SEND_PACKETcalls down tosg_io, which callsverify_command, which will not permit anyone but root to use any unrecognised commands. GET CONFIGURATION does not seems to be one of those recognised. This check for unrecognised commands is a fairly recent addition, IIRC.
2.6.8 didn't have any command granularity, you must be root to issue any comand there.
Signature · 1 line
Jens Axboe
Quoted 9 lines · Jens Axboe
Quoted 5 lines · Sean Neakums
CDROM_SEND_PACKETcalls down tosg_io, which callsverify_command, which will not permit anyone but root to use any unrecognised commands. GET CONFIGURATION does not seems to be one of those recognised. This check for unrecognised commands is a fairly recent addition, IIRC.2.6.8 didn't have any command granularity, you must be root to issue any comand there.
I was looking at 2.6.8.1 when I wrote the above, although it's possible my eye skipped over something.
verify_command certainly seems to do the check:
http://lxr.linux.no/source/drivers/block/scsi_ioctl.c?v=2.6.8.1#L113
And it looks the same in the 2.6.8 tree I have here, too.
(Not trying to be an ass, just concerned about my reading comprehension.)
Quoted 12 lines · Sean Neakums
Quoted 9 lines · Jens Axboe
Quoted 5 lines · Sean Neakums
CDROM_SEND_PACKETcalls down tosg_io, which callsverify_command, which will not permit anyone but root to use any unrecognised commands. GET CONFIGURATION does not seems to be one of those recognised. This check for unrecognised commands is a fairly recent addition, IIRC.2.6.8 didn't have any command granularity, you must be root to issue any comand there.
Quoted 8 lines
I was looking at 2.6.8.1 when I wrote the above, although it's possible my eye skipped over something.
verify_commandcertainly seems to do the check:http://lxr.linux.no/source/drivers/block/scsi_ioctl.c?v=2.6.8.1#L113
And it looks the same in the 2.6.8 tree I have here, too.
You are right, it was added before, my recollection of the events apparently isn't so good either. You are right in that GET_CONFIGURATION was added later, post 2.6.8 release.
Quoted 1 line
(Not trying to be an ass, just concerned about my reading comprehension.)
:-)
Signature · 1 line
Jens Axboe
Quoted 9 lines · Sean Neakums
Quoted 7 lines · Jens Axboe
Quoted 5 lines · Sean Neakums
CDROM_SEND_PACKETcalls down tosg_io, which callsverify_command, which will not permit anyone but root to use any unrecognised commands. GET CONFIGURATION does not seems to be one of those recognised. This check for unrecognised commands is a fairly recent addition, IIRC.
Quoted 5 lines
Quoted 2 lines
2.6.8 didn't have any command granularity, you must be root to issue any comand there.
I was looking at 2.6.8.1 when I wrote the above, although it's possible my eye skipped over something.
ah yes now i have found the issue i have a confession to make, i'm actually running 2.6.8.1-selinux1.
i didn't want to mention that in case it was selinux that was the problem :)
l.
Quoted 6 lines · Sean Neakums
Quoted 1 line
... what gives?
CDROM_SEND_PACKETcalls down tosg_io, which callsverify_command, which will not permit anyone but root to use any unrecognised commands. GET CONFIGURATION does not seems to be one of those recognised.
oh, right, i didn't think of checking that.
so if i just add that command, everything works hunky-dory.
well, i'll try it!
l.
Signature · 7 lines
-- Truth, honesty and respect are rare commodities that all spring from the same well: Love. If you love yourself and everyone and everything around you, funnily and coincidentally enough, life gets a lot better. -- <a href="http://lkcl.net"> lkcl.net </a> <br /> <a href="mailto:[email protected]"> [email protected] </a> <br />
Index: drivers/block/scsi_ioctl.c
===================================================================
RCS file: /cvsroot/selinux/nsa/linux-2.6/drivers/block/scsi_ioctl.c,v retrieving revision 1.1.1.9
block/scsi_ioctl.c +1 -0
@@ -146,6 +146,7 @@safe_for_read (GPCMD_READ_TOC_PMA_ATIP ),safe_for_read (GPCMD_REPORT_KEY ),safe_for_read (GPCMD_SCAN ), +safe_for_read (GPCMD_GET_CONFIGURATION ),/* Basic writing commands */ safe_for_write(WRITE_6),