Skip to contentSkip to conversation

: spdif hw entry fails to work in multi

ALSA - driver 0000572 [email protected] 1 participant 1 message Oct 8, 2004

lore
Share & tools
lore
#0 lore raw

The following bug has been SUBMITTED.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000572
======================================================================
Reported By: ramendik
Assigned To:
======================================================================

Project:                    ALSA - driver
Bug ID:                     572
Category:                   PCI - intel8x0
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               RH-based
Kernel Version:             2.6.8.1, with alsa 1.0.7rc1 plus patches from bug 0000505
======================================================================
Date Submitted:             10-08-2004 02:27 CEST
Last Modified:              10-08-2004 02:27 CEST

======================================================================
Summary: spdif hw entry fails to work in multi
Description:
After bug 0000505 was fixed, hw:0,0 only plays to analog devices, and hw:0,4 to spdif. As one needs output in both, I tried to use .asoundrc , and therefore needed to use the "multi" pcm type in order to unite these two (and then route). This is what I put in .asoundrc

pcm.whole {
    type multi
    slaves.a.pcm "hw:0,0"
    slaves.a.channels 2
    slaves.b.pcm "hw:0,4"
    slaves.b.channels 2
    bindings.0.slave a
    bindings.0.channel 0
    bindings.1.slave a
    bindings.1.channel 1
    bindings.2.slave b
    bindings.2.channel 0
    bindings.3.slave b
    bindings.3.channel 1
}
pcm.rt {
    type route
    slave.pcm "whole"
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 1
    ttable.1.3 1
}

The ttable may be wrong - I could not find a sane description anywhere - but I tried many variants, and besides, playing to "whole" bypasses this.

So here's what I get when playing to "rt" OR to "whole" via alsaplayer :

$ alsaplayer -d whole test.wav 
error on set_channels (2)
Unavailable hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 64
CHANNELS: 4
RATE: 44100
PERIOD_TIME: (181 371520)
PERIOD_SIZE: [8 16384]
PERIOD_BYTES: [64 131072]
PERIODS: [1 1024]
BUFFER_TIME: (181 371520)
BUFFER_SIZE: [8 16384]
BUFFER_BYTES: [64 131072]
TICK_TIME: 1000
error on set_channels (2)
Unavailable hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 64
CHANNELS: 4
RATE: 44100
PERIOD_TIME: (181 371520)
PERIOD_SIZE: [8 16384]
PERIOD_BYTES: [64 131072]
PERIODS: [1 1024]
BUFFER_TIME: (181 371520)
BUFFER_SIZE: [8 16384]
BUFFER_BYTES: [64 131072]
TICK_TIME: 1000
failed to configure output device...trying OSS

then alsaplayer hangs until interrupted.

When I comment out everything related to slave b, "whole" seems to work (without spdif output, of course). So this seems like a bug in the spdif device.
======================================================================

Bug History
Date Modified Username Field Change
======================================================================

10-08-04 02:27 ramendik       New Bug                                      
10-08-04 02:27 ramendik       Distribution              => RH-based        
10-08-04 02:27 ramendik       Kernel Version            => 2.6.8.1, with alsa 1.0.7rc1 plus patches from bug 0000505

======================================================================

-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl