Kernel 2.6.8 and DELL's DOTHAN Processor B0
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Dominik,
here the outputs:
::::::::::::::/proc/acpi/processor/CPU0/info
::::::::::::::
processor id: 0
acpi id: 0
bus mastering control: yes
power management: yes
throttling control: yes
limit interface: yes
::::::::::::::
/proc/acpi/processor/CPU0/limit
::::::::::::::
active limit: P0:T0
user limit: P0:T0
thermal limit: P0:T0
::::::::::::::
/proc/acpi/processor/CPU0/power
::::::::::::::
active state: C2
default state: C1
bus master activity: ffffffff
states:
C1: promotion[C2] demotion[--] latency[000] usage[00011180]
*C2: promotion[C3] demotion[C1] latency[050] usage[00390021]
C3: promotion[--] demotion[C2] latency[050] usage[00004735]
::::::::::::::
/proc/acpi/processor/CPU0/throttling
::::::::::::::
state count: 8
active state: T0
states:
*T0: 00%
T1: 12%
T2: 25%
T3: 37%
T4: 50%
T5: 62%
T6: 75%
T7: 87%::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq ::::::::::::::
600000
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq ::::::::::::::
1700000
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq ::::::::::::::
600000
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies ::::::::::::::
1700000 1700000 1700000 1400000 1200000 1000000 800000 600000 ::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors ::::::::::::::
userspace
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq ::::::::::::::
600000
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver ::::::::::::::
centrino
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ::::::::::::::
userspace
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq ::::::::::::::
600000
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq ::::::::::::::
600000
::::::::::::::/sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed ::::::::::::::
600000
scaling_min_freq, scaling_max_freq, scaling_governor and scaling_setseed are rw. but I can write what I want in these files, nothing change.
michel.
and,
Quoting Dominik Brodowski <[email protected]>:
Quoted 23 lines
Hi,
Can you send me the output of
cat /acpi/processor/*/performance
and
cat
/sys/devices/system/cpu/cpu0/cpufreq/scaling_governorcat/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freqAlso, is this happening while on AC power or while on battery?
Thirdly, can you disassemble the DSDT and, if it exists, the SSDT, and check for the
_PPCmethod? How to disassemble the DSDT is noted at
http://acpi.sourceforge.net , for the SSDT check gspr's post on Sep. 20th, 12:53 at
http://forums.gentoo.org/viewtopic.php?t=223411&highlight=ssdt+acpidmpDominik