Skip to contentSkip to conversation

Sending and receiving

LARTC Alexis 2 participants 2 messages Oct 9, 2004

lore
Share & tools
lore

Alexis

author
#0 lore raw

Hi all.

Here's the situation

Linux box with eth0 connected to LAN, and eth1 connected to internet via cablemodem.

Connected to the lan are some voip devices, ive configured htb in eth1 to save some bandwith for the voip devices. Now i have another issue, at some hours of the days, some servers in the lan downloads data from other servers in internet and they use all bandwith available.

My question is the following.

Applying some classes to eth0 is a good way to reserve some bandwith for the traffic that comes from internet to the voip devices?

I mean, is this a good way to manage the "download" traffic?

Thanks and best regards

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw
Quoted 12 lines · Alexis

Hi all.

Here's the situation

Linux box with eth0 connected to LAN, and eth1 connected to internet via cablemodem.

Connected to the lan are some voip devices, ive configured htb in eth1 to save some bandwith for the voip devices. Now i have another issue, at some hours of the days, some servers in the lan downloads data from other servers in internet and they use all bandwith available.

Quoted 4 lines

My question is the following.

Applying some classes to eth0 is a good way to reserve some bandwith for the traffic that comes from internet to the voip devices?

Yes.

Quoted 1 line

I mean, is this a good way to manage the "download" traffic?

Yes.

Stef

Signature · 6 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/