parport: kill dead code and exports

@@ -207,8 +207,7 @@
  *
  *	This function is similar to parport_register_device(), except
  *	that it locates a device by its number rather than by the port
- *	it is attached to.  See parport_find_device() and
- *	parport_find_class().
+ *	it is attached to.
  *
  *	All parameters except for @devnum are the same as for
  *	parport_register_device().  The return value is the same as

@@ -305,53 +304,6 @@
 	return res;
 }
 
-/**
- *	parport_device_coords - convert canonical device number
- *	@devnum: device number
- *	@parport: pointer to storage for parallel port number
- *	@mux: pointer to storage for multiplexor port number
- *	@daisy: pointer to storage for daisy chain address
- *
- *	This function converts a device number into its coordinates in
- *	terms of which parallel port in the system it is attached to,
- *	which multiplexor port it is attached to if there is a
- *	multiplexor on that port, and which daisy chain address it has
- *	if it is in a daisy chain.
- *
- *	The caller must allocate storage for @parport, @mux, and
- *	@daisy.
- *
- *	If there is no device with the specified device number, -ENXIO
- *	is returned.  Otherwise, the values pointed to by @parport,
- *	@mux, and @daisy are set to the coordinates of the device,
- *	with -1 for coordinates with no value.
- *
- *	This function is not actually very useful, but this interface
- *	was suggested by IEEE 1284.3.
- **/
-
-int parport_device_coords (int devnum, int *parport, int *mux, int *daisy)
-{
-	struct daisydev *dev;
-
-	spin_lock(&topology_lock);
-
-	dev = topology;
-	while (dev && dev->devnum != devnum)
-		dev = dev->next;
-
-	if (!dev) {
-		spin_unlock(&topology_lock);
-		return -ENXIO;
-	}
-
-	if (parport) *parport = dev->port->portnum;
-	if (mux) *mux = dev->port->muxport;
-	if (daisy) *daisy = dev->daisy;
-	spin_unlock(&topology_lock);
-	return 0;
-}
-
 /* Send a daisy-chain-style CPP command packet. */
 static int cpp_daisy (struct parport *port, int cmd)
 {

@@ -558,108 +510,3 @@
 	kfree (deviceid);
 	return detected;
 }
-
-/* Find a device with a particular manufacturer and model string,
-   starting from a given device number.  Like the PCI equivalent,
-   'from' itself is skipped. */
-
-/**
- *	parport_find_device - find a specific device
- *	@mfg: required manufacturer string
- *	@mdl: required model string
- *	@from: previous device number found in search, or %NULL for
- *	       new search
- *
- *	This walks through the list of parallel port devices looking
- *	for a device whose 'MFG' string matches @mfg and whose 'MDL'
- *	string matches @mdl in their IEEE 1284 Device ID.
- *
- *	When a device is found matching those requirements, its device
- *	number is returned; if there is no matching device, a negative
- *	value is returned.
- *
- *	A new search it initiated by passing %NULL as the @from
- *	argument.  If @from is not %NULL, the search continues from
- *	that device.
- **/
-
-int parport_find_device (const char *mfg, const char *mdl, int from)
-{
-	struct daisydev *d;
-	int res = -1;
-
-	/* Find where to start. */
-
-	spin_lock(&topology_lock);
-	d = topology; /* sorted by devnum */
-	while (d && d->devnum <= from)
-		d = d->next;
-
-	/* Search. */
-	while (d) {
-		struct parport_device_info *info;
-		info = &d->port->probe_info[1 + d->daisy];
-		if ((!mfg || !strcmp (mfg, info->mfr)) &&
-		    (!mdl || !strcmp (mdl, info->model)))
-			break;
-
-		d = d->next;
-	}
-
-	if (d)
-		res = d->devnum;
-
-	spin_unlock(&topology_lock);
-	return res;
-}
-
-/**
- *	parport_find_class - find a device in a specified class
- *	@cls: required class
- *	@from: previous device number found in search, or %NULL for
- *	       new search
- *
- *	This walks through the list of parallel port devices looking
- *	for a device whose 'CLS' string matches @cls in their IEEE
- *	1284 Device ID.
- *
- *	When a device is found matching those requirements, its device
- *	number is returned; if there is no matching device, a negative
- *	value is returned.
- *
- *	A new search it initiated by passing %NULL as the @from
- *	argument.  If @from is not %NULL, the search continues from
- *	that device.
- **/
-
-int parport_find_class (parport_device_class cls, int from)
-{
-	struct daisydev *d;
-	int res = -1;
-
-	spin_lock(&topology_lock);
-	d = topology; /* sorted by devnum */
-	/* Find where to start. */
-	while (d && d->devnum <= from)
-		d = d->next;
-
-	/* Search. */
-	while (d && d->port->probe_info[1 + d->daisy].class != cls)
-		d = d->next;
-
-	if (d)
-		res = d->devnum;
-
-	spin_unlock(&topology_lock);
-	return res;
-}
-
-EXPORT_SYMBOL(parport_open);
-EXPORT_SYMBOL(parport_close);
-EXPORT_SYMBOL(parport_device_num);
-EXPORT_SYMBOL(parport_device_coords);
-EXPORT_SYMBOL(parport_daisy_deselect_all);
-EXPORT_SYMBOL(parport_daisy_select);
-EXPORT_SYMBOL(parport_daisy_init);
-EXPORT_SYMBOL(parport_find_device);
-EXPORT_SYMBOL(parport_find_class);

@@ -40,7 +40,7 @@
 
 /* Make parport_wait_peripheral wake up.
  * It will be useful to call this from an interrupt handler. */
-void parport_ieee1284_wakeup (struct parport *port)
+static void parport_ieee1284_wakeup (struct parport *port)
 {
 	up (&port->physport->ieee1284.irq);
 }

@@ -813,9 +813,7 @@
 EXPORT_SYMBOL(parport_negotiate);
 EXPORT_SYMBOL(parport_write);
 EXPORT_SYMBOL(parport_read);
-EXPORT_SYMBOL(parport_ieee1284_wakeup);
 EXPORT_SYMBOL(parport_wait_peripheral);
-EXPORT_SYMBOL(parport_poll_peripheral);
 EXPORT_SYMBOL(parport_wait_event);
 EXPORT_SYMBOL(parport_set_timeout);
 EXPORT_SYMBOL(parport_ieee1284_interrupt);

@@ -213,4 +213,3 @@
 	parport_close (dev);
 	return retval;
 }
-EXPORT_SYMBOL(parport_device_id);

@@ -529,8 +529,5 @@
 }
 #endif
 
-EXPORT_SYMBOL(parport_device_proc_register);
-EXPORT_SYMBOL(parport_device_proc_unregister);
-
 module_init(parport_default_proc_register)
 module_exit(parport_default_proc_unregister)

@@ -1007,7 +1007,6 @@
 EXPORT_SYMBOL(parport_unregister_driver);
 EXPORT_SYMBOL(parport_register_device);
 EXPORT_SYMBOL(parport_unregister_device);
-EXPORT_SYMBOL(parport_get_port);
 EXPORT_SYMBOL(parport_put_port);
 EXPORT_SYMBOL(parport_find_number);
 EXPORT_SYMBOL(parport_find_base);

@@ -466,7 +466,6 @@
 				    int usec);
 
 /* For architectural drivers */
-extern void parport_ieee1284_wakeup (struct parport *port);
 extern size_t parport_ieee1284_write_compat (struct parport *,
 					     const void *, size_t, int);
 extern size_t parport_ieee1284_read_nibble (struct parport *,

@@ -500,20 +499,8 @@
 extern void parport_close (struct pardevice *dev);
 extern ssize_t parport_device_id (int devnum, char *buffer, size_t len);
 extern int parport_device_num (int parport, int mux, int daisy);
-extern int parport_device_coords (int devnum, int *parport, int *mux,
-				  int *daisy);
 extern void parport_daisy_deselect_all (struct parport *port);
 extern int parport_daisy_select (struct parport *port, int daisy, int mode);
-
-/* For finding devices based on their device ID.  Example usage:
-   int devnum = -1;
-   while ((devnum = parport_find_class (PARPORT_CLASS_DIGCAM, devnum)) != -1) {
-       struct pardevice *dev = parport_open (devnum, ...);
-       ...
-   }
-*/
-extern int parport_find_device (const char *mfg, const char *mdl, int from);
-extern int parport_find_class (parport_device_class cls, int from);
 
 /* Lowlevel drivers _can_ call this support function to handle irqs.  */
 static __inline__ void parport_generic_irq(int irq, struct parport *port,