Skip to contentSkip to conversation

IDE warning: "Wait for ready failed before probe!"

DISCUSSION Nick Warne 2 participants 2 messages Oct 24, 2004

lore
Share & tools
lore

Nick Warne

author
#0 lore raw
Quoted 9 lines
Quoted 2 lines

1. Are these warnings usual for a nonexistant IDE drive?
2. Could they be toned down?

Disable CONFIG_IDE_GENERIC
- or -
Use the ideX=noprobe boot parm, replacing X with the interface number not to probe.

Kurt

I started to get these messages in logs since building 2.6.9, and a google reveals this from Alan Cox:

http://www.redhat.com/archives/fedora-test-list/2004-September/msg00300.html

So, will these be turned off, or do we have to follow above instructions?

Nick

Signature · 2 lines
"When you're chewing on life's gristle,
Don't grumble, Give a whistle..."
#1 lore raw
Quoted 8 lines · Nick Warne
Quoted 7 lines
Quoted 2 lines

1. Are these warnings usual for a nonexistant IDE drive?
2. Could they be toned down?

Disable CONFIG_IDE_GENERIC
- or -
Use the ideX=noprobe boot parm, replacing X with the interface number not to probe.

Quoted 8 lines
Quoted 1 line

Kurt

I started to get these messages in logs since building 2.6.9, and a google reveals this from Alan Cox:

http://www.redhat.com/archives/fedora-test-list/2004-September/msg00300.html

So, will these be turned off, or do we have to follow above instructions?

Send a patch and it will be turned off (printks should be replaced by pr_debugs). :)

It is still a good thing to disable ide-generic if it is not needed (faster boot).