2.6.10-rc1-mm1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines
Quoted 6 lines
name=hpet node=c03ee9a0 acpi_bus_drivers.prev=c03ea6a0 name=i8042 node=c03eeda0 acpi_bus_drivers.prev=c03ee9a0 name=floppy node=c03f24c0 acpi_bus_drivers.prev=c03ee9a0
Note acpi_bus_drivers.prev for floppy was not set to
c03eeda0, which you would normally expect?
The i8042 driver unregisters if it doesn't fine hardware, so the above looks OK to me. You might add similar debug to the acpi_bus_unregister_driver() path just to be sure.
The problem is definitely something to do with the acpi driver list maintenance, so I'm interested in all your debug output.
I did find a couple places that unregister the driver even when acpi_bus_register_driver() fails, which could cause this. But I really doubt that this is the problem, because the only error returns there are for "acpi_disabled" and "!driver". Patch is attached anyway if you want to try it.
Quoted 4 lines
ah. the acpi floppy scanning code seems to be misinterpreting the
acpi_bus_register_driver()return value, so if it returns zero we think that the driver was registered, only it wasn't.floppy_init()then proceeds to unregister a not-registered driver. I think. Does this help?
I don't think so. acpi_bus_register_driver() returns <0 for error (driver not registered), or >=0 if it was registered. The count is the number of devices found. So I think the floppy code is OK.
Quoted 2 lines
Bjorn, do I remember hearing that we can drop all that code anyway? That it'll be done in another way?
There's talk about making PNP smart enough to use info from ACPI. But that doesn't seem to be cooked yet, and floppy doesn't use PNP yet in any case.
drivers/acpi/asus_acpi.c renamed from drivers/acpi/asus_acpi.c.orig +2 -1
@@ -1213,7 +1213,8 @@ result =acpi_bus_register_driver (&asus_hotk_driver);if (result <1 ) { -acpi_bus_unregister_driver (&asus_hotk_driver); +if (result >=0 ) +acpi_bus_unregister_driver (&asus_hotk_driver);remove_proc_entry (PROC_ASUS , acpi_root_dir);return -ENODEV ; }
drivers/acpi/thinkpad_acpi.c renamed from drivers/acpi/thinkpad_acpi.c.orig +4 -1
@@ -247,8 +247,11 @@return -ENODEV ; result =acpi_bus_register_driver (&acpi_thinkpad_driver); -if (result !=1 ) +if (result !=1 ) { +if (result >=0 ) +acpi_bus_unregister_driver (&acpi_thinkpad_driver);return -ENODEV ; + } printk(KERN_INFO LOGPREFIX "ACPI IBM Thinkpad Fn+Fx key driver version %s\n", DRIVER_VERSION);
Quoted 5 lines · Bjorn Helgaas
I did find a couple places that unregister the driver even when
acpi_bus_register_driver()fails, which could cause this. But I really doubt that this is the problem, because the only error returns there are for "acpi_disabled" and "!driver". Patch is attached anyway if you want to try it.
This looks to have fixed the problem.
- James
Signature · 2 lines
James Morris <[email protected]>
Quoted 8 lines · James Morris
Quoted 5 lines · Bjorn Helgaas
I did find a couple places that unregister the driver even when
acpi_bus_register_driver()fails, which could cause this. But I really doubt that this is the problem, because the only error returns there are for "acpi_disabled" and "!driver". Patch is attached anyway if you want to try it.This looks to have fixed the problem.
Hmmm. Can you add a little more debug (i.e., the printk in acpi_bus_unregister_driver(), and some in the acpi_bus_register_driver() failure paths)? I really don't understand how that patch could have fixed the problem, and I hate to paper over a problem without understanding it better.
Quoted 9 lines · James Morris
Quoted 5 lines · Bjorn Helgaas
I did find a couple places that unregister the driver even when
acpi_bus_register_driver()fails, which could cause this. But I really doubt that this is the problem, because the only error returns there are for "acpi_disabled" and "!driver". Patch is attached anyway if you want to try it.This looks to have fixed the problem.
James,
I had a similar problem, until I cleaned the tree and re-built from scratch. I'm wondering if you do the same if the tree w/o any patches works for you.
thanks,
-Len
Quoted 4 lines · Len Brown
James,
I had a similar problem, until I cleaned the tree and re-built from scratch. I'm wondering if you do the same if the tree w/o any patches works for you.
Nope, still seeing it in rc1-mm1
Signature · 2 lines
James Morris <[email protected]>