i2c/busses/ : make some code static
PATCH 1/1 i2c/busses/ : make some code static
The patch below makes some needlessly global code under i2c/busses/ static.
diffstat output:
drivers/i2c/busses/i2c-ali1535.c | 4 ++-- drivers/i2c/busses/i2c-amd8111.c | 12 ++++++------ drivers/i2c/busses/scx200_acb.c | 4 ++-- drivers/i2c/busses/scx200_i2c.c | 4 ++-- 4 files changed, 12 insertions(+), 12 deletions(-)
Signed-off-by Adrian Bunk <[email protected]>
drivers/i2c/busses/i2c-ali1535.c renamed from drivers/i2c/busses/i2c-ali1535.c.old +2 -2
@@ -137,7 +137,7 @@static unsigned short ali1535_smba; -DECLARE_MUTEX (i2c_ali1535_sem); +static DECLARE_MUTEX (i2c_ali1535_sem);/* Detect whether a ALI1535 can be found, and initialize it, where necessary. Note the differences between kernels with the old PCI BIOS interface and
@@ -465,7 +465,7 @@ } -u32 ali1535_func (struct i2c_adapter *adapter) +static u32 ali1535_func (struct i2c_adapter *adapter) {return I2C_FUNC_SMBUS_QUICK |I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
drivers/i2c/busses/i2c-amd8111.c renamed from drivers/i2c/busses/i2c-amd8111.c.old +6 -6
@@ -67,7 +67,7 @@* ACPI 2.0 chapter 13 access of registers of the EC */ -unsigned int amd_ec_wait_write (struct amd_smbus *smbus) +static unsigned int amd_ec_wait_write (struct amd_smbus *smbus) {int timeout =500 ;
@@ -82,7 +82,7 @@return 0 ; } -unsigned int amd_ec_wait_read (struct amd_smbus *smbus) +static unsigned int amd_ec_wait_read (struct amd_smbus *smbus) {int timeout =500 ;
@@ -97,7 +97,7 @@return 0 ; } -unsigned int amd_ec_read (struct amd_smbus *smbus,unsigned char address,unsigned char *data) +static unsigned int amd_ec_read (struct amd_smbus *smbus,unsigned char address,unsigned char *data) {if (amd_ec_wait_write (smbus))return -1 ;
@@ -114,7 +114,7 @@return 0 ; } -unsigned int amd_ec_write (struct amd_smbus *smbus,unsigned char address,unsigned char data) +static unsigned int amd_ec_write (struct amd_smbus *smbus,unsigned char address,unsigned char data) {if (amd_ec_wait_write (smbus))return -1 ;
@@ -174,7 +174,7 @@#define AMD_SMB_PRTCL_PEC 0x80 -s32 amd8111_access (struct i2c_adapter * adap,u16 addr,unsigned short flags, +static s32 amd8111_access (struct i2c_adapter * adap,u16 addr,unsigned short flags,char read_write,u8 command,int size,union i2c_smbus_data * data) {struct amd_smbus *smbus = adap->algo_data;
@@ -315,7 +315,7 @@ } -u32 amd8111_func (struct i2c_adapter *adapter) +static u32 amd8111_func (struct i2c_adapter *adapter) {return I2C_FUNC_SMBUS_QUICK |I2C_FUNC_SMBUS_BYTE |I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA |
drivers/i2c/busses/scx200_acb.c renamed from drivers/i2c/busses/scx200_acb.c.old +2 -2
@@ -402,9 +402,9 @@ .functionality = scx200_acb_func, }; -struct scx200_acb_iface *scx200_acb_list; +static struct scx200_acb_iface *scx200_acb_list; -int scx200_acb_probe (struct scx200_acb_iface *iface) +static int scx200_acb_probe (struct scx200_acb_iface *iface) {u8 val;
drivers/i2c/busses/scx200_i2c.c renamed from drivers/i2c/busses/scx200_i2c.c.old +2 -2
@@ -86,7 +86,7 @@ .name = "NatSemi SCx200 I2C", }; -int scx200_i2c_init (void ) +static int scx200_i2c_init (void ) {pr_debug (NAME ": NatSemi SCx200 I2C Driver\n" );
@@ -115,7 +115,7 @@return 0 ; } -void scx200_i2c_cleanup (void ) +static void scx200_i2c_cleanup (void ) {i2c_bit_del_bus (&scx200_i2c_ops); }
Greg KH
AppliedQuoted 5 lines · Adrian Bunk
The patch below makes some needlessly global code under i2c/busses/ static.
diffstat output:
Quoted 8 lines
drivers/i2c/busses/i2c-ali1535.c | 4 ++-- drivers/i2c/busses/i2c-amd8111.c | 12 ++++++------ drivers/i2c/busses/scx200_acb.c | 4 ++-- drivers/i2c/busses/scx200_i2c.c | 4 ++-- 4 files changed, 12 insertions(+), 12 deletions(-)Signed-off-by Adrian Bunk <[email protected]>
Applied, thanks.
greg k-h