No Sound with Kernel 2.6.7
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 5 lines
I did what you have recommended but the sound continues to be elusive with kernel 2.6.7. On boot I get the following messages:
Loading ALSA mixer settings:
/usr/sbin/alsactlrestore No state is present for card Dummy
Should go away after the first one, just means it has no settings to restore. If you keep seeing this, then it's a bigger issue. If you haven't already run alsamixer do so.
Quoted 3 lines
Loading OSS compatibility modules for ALSA.
FATAL: Modulesnd_pcm_ossnot found.
FATAL: Modulesnd_mixer_ossnot found.
What this means is that it failed to load the OSS emulation modules. There are two sound architectures in use in Linux, 2.4 uses OSS (Open Sound System), whereas 2.6 uses ALSA (Advanced Linux Sound Architecture) to provide sound. ALSA includes the ability to emulate OSS so that applications which use it for sound function correctly. This significant change is also why your old settings work fine in 2.4 but not in 2.6 (they load the OSS drivers).
If you want to test if ALSA is working ok, try running XMMS and changing the audio output plugin to ALSA to see if that works. You could also try playing .wav files with the aplay command.
Quoted 4 lines
In kernel 2.4.26 all the settings are the same in
/etc/rc.das well as for modprobe.conf and modules.conf and the sound is no problem.What would be the next step?
Probably try enabling the following in your kernel (either as modules or right in the kernel).
OSS Mixer API
OSS PCM API
OSS Sequencer API
They're right under the ALSA settings with make xconfig, and will provide the OSS emulation you will need for OSS based apps.
- --
"It should be illegal to yell "Y2K" in a crowded economy. :-)" - Larry Wall -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFBk3bK94zI/zB2CYURAubgAJ4wxRXdNZA5HYCarUofg4rKVI4DAwCfUCfe 0mRs/wlA6UDmFBbzvn8uoAE=
=jPWf
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Thanks!
Quoted 3 lines · Peter
Quoted 3 lines
In kernel 2.4.26 all the settings are the same in
/etc/rc.das well as for modprobe.conf and modules.conf and the sound is no problem. What would be the next step?
Quoted 7 lines
Probably try enabling the following in your kernel (either as modules or right in the kernel).
OSS Mixer API OSS PCM API OSS Sequencer API
They're right under the ALSA settings with make xconfig, and will provide the
OSS emulation you will need for OSS based apps.
I did all that in the kernel, did make, copied bzImage to vmlinuz, did lilo and on boot I get the same error and no sound:
Quoted 3 lines
Loading OSS compatibility modules for ALSA.
FATAL: Modulesnd_pcm_ossnot found.
FATAL: Modulesnd_mixer_ossnot found.
I will stop by that now playing with 2.6.7 and wait till slackware will come up with a correct version.
Regards
Signature · 7 lines
Peter - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs