Skip to contentSkip to conversation

Missing pci_dev_put in arch/ppc/platforms/chrp_pci.c ?

PPC Rolf Eike Beer 2 participants 2 messages Nov 17, 2004

lore
Share & tools
lore
#0 lore raw

This is how it is:

chrp_pcibios_fixup(void)

{
        struct pci_dev *dev = NULL;
        struct device_node *np;

        /* PCI interrupts are controlled by the OpenPIC */
        for_each_pci_dev(dev) {
                np = pci_device_to_OF_node(dev);
                if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
                        dev->irq = np->intrs[0].line;
                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
        }
}

for_each_pci_dev is defined to use pci_get_device in include/linux/pci.h, which uses pci_dev_get. So every PCI devices use count will be incremented if chrp_pcibios_fixup is called. Do I miss something or should we add a pci_dev_put(dev) at the end of the loop?

Eike

#1 lore raw
Quoted 16 lines · Rolf Eike Beer

This is how it is:

chrp_pcibios_fixup(void)

{
        struct pci_dev *dev = NULL;
        struct device_node *np;

        /* PCI interrupts are controlled by the OpenPIC */
        for_each_pci_dev(dev) {
                np = pci_device_to_OF_node(dev);
                if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
                        dev->irq = np->intrs[0].line;
                pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
        }
}
Quoted 4 lines

for_each_pci_dev is defined to use pci_get_device in include/linux/pci.h, which uses pci_dev_get. So every PCI devices use count will be incremented if chrp_pcibios_fixup is called. Do I miss something or should we add a pci_dev_put(dev) at the end of the loop?

You missed something :)

Read the docs for pci_get_device(), it will explain how the above code is just fine.

BTW, this isn't the first time this very question has come up on lkml, how come people never think to do a archive search...

thanks,

greg k-h