Skip to contentSkip to conversation

local-/io-apic nmi watchdog failing on S2466

DISCUSSION Joerg Sommrey 2 participants 3 messages Nov 17, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

I'm still having problems with nmi watchdog on my S2466 board. I tried lots of different configurations with a large number of 2.6 kernels (vanilla, -mm, -ac) all with the same result: no working nmi watchdog, neither with local- nor with io-apic. I still wonder if anybody out there has ever succeeded with a working nmi watchdog on Tyan Tiger MPX.

The symptoms are:

nmi_watchdog=1:
===============
dmesg:
testing NMI watchdog ... CPU#0: NMI appears to be stuck!
/proc/interrupts:
no NMI count

nmi_watchdog=2:
===============
dmesg:
testing NMI watchdog ... OK.
/proc/interupts:
NMI count increments
recovery from lockup:
none

nmi_watchdog=2 clock=pit:
=========================
dmesg:
testing NMI watchdog ... CPU#0: NMI appears to be stuck!
/proc/interrupts:
NMI count increments, but rate is ~ 1/20s
recovery from lockup:
none

The lockup-test is done with a little program that Ingo posted on this list:

int

main(void) {
        iopl(3);
        while (1)
                asm("cli");
        return 0;
}

The only reaction I can see from this test: after some seconds (5+) the LEDs on the keyboard start blinking when nmi_watchdog=2 and clock!=pit. Always need to hit the reset button :-(

What else could I try? Are there any BIOS-settings relevant to a working nmi-watchdog? What information is needed to track down this problem?

Maybe it's the board's failure, but as there *are* counted NMIs I still hope there is a software solution to this problem.

Thanks,
-jo

Signature · 1 line
-rw-r--r--  1 jo users 63 2004-11-17 17:45 /home/jo/.signature
#1 lore raw
Quoted 2 lines · Joerg Sommrey

Maybe it's the board's failure, but as there *are* counted NMIs I still hope there is a software solution to this problem.

All 2466 boards seem to do be broken like this, maybe you can contact Tyan about it and see if they have any comment?

#2 lore raw
Quoted 8 lines · Chris Wedgwood
Quoted 2 lines · Joerg Sommrey

Maybe it's the board's failure, but as there *are* counted NMIs I still hope there is a software solution to this problem.

All 2466 boards seem to do be broken like this, maybe you can contact Tyan about it and see if they have any comment?

Just sent a problem report to Tyan. Let's see...

-jo

Signature · 1 line
-rw-r--r--  1 jo users 63 2004-11-17 23:09 /home/jo/.signature