[2.4.28] Enabling a SATA drive (sata_promise.o) with Promise Fastrak S150 TX2Plus SATA PCI card?
Hello,
I have a Dell 650/Linux-2.4.28 with a Promise Fastrak S150 TX2Plus SATA PCI card with 2 250GB Western digital drives connected. Could anyone help me how to enable the SATA drives? I had 2.4.25 one time and it showed me /dev/hde and /dev/hdg but the new SATA driver should show as /dev/sdX, right?
I see libata.o and sata_promise.o modules. When I do "modprobe libata and modprobe sata_promise", I got bunch of "Unresolved symbols". I also downloaded ft3xx driver and didn't work too. Any idea? I rebooted the same machine with Suse9.1 (2.6.x kernel). It loaded the libata.o and sata_promise.o and I could see /dev/sda and /dev/sdb as SATA drives correctly.
I also have a Intel P5 ICH5, D875PBZ with 2 SATA ports. I also could not enable the drives with ata_piix.o. Any helps would be appreciated.
Jin
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Jin" == Jin Suh <[email protected]> writes:
Jin> Hello, I have a Dell 650/Linux-2.4.28 with a Promise Fastrak Jin> S150 TX2Plus SATA PCI card with 2 250GB Western digital Jin> drives connected. Could anyone help me how to enable the SATA Jin> drives? I had 2.4.25 one time and it showed me /dev/hde and Jin> /dev/hdg but the new SATA driver should show as /dev/sdX, Jin> right?
Jin> I see libata.o and sata_promise.o modules. When I do Jin> "modprobe libata and modprobe sata_promise", I got bunch of Jin> "Unresolved symbols". I also downloaded ft3xx driver and Jin> didn't work too. Any idea? I rebooted the same machine with Jin> Suse9.1 (2.6.x kernel). It loaded the libata.o and Jin> sata_promise.o and I could see /dev/sda and /dev/sdb as SATA Jin> drives correctly. I also have a Intel P5 ICH5, D875PBZ with Jin> 2 SATA ports. I also could not enable the drives with Jin> ata_piix.o. Any helps would be appreciated.
I had this problem when I was using an insmod from busybox compiled up without the tainted kernel checking feature. the libata.o module is a GPLONLY as far as I recall.
So, check your insmod/modprobe versions.
Kenny.
Signature · 3 lines
Desktop Services Team, EUCS. University of Edinburgh, Scotland.