Skip to contentSkip to conversation

2.6.10-rc2-bk13 freeze on boot with e100 in HP DL360G1

DISCUSSION Ruben Puettmann 1 participant 1 message Nov 30, 2004

lore
Share & tools
lore
#0 lore raw

hello,

I try to boot the fresh 2.6.10-rc2-bk13 on an HP/Compaq DL360G1. (Config attached.) Boot parameter "elevator=cfq pci=noacpi" or "elevator=cfq" only.

Last message on boot is :

e100: Intel(R) PRO/100 Network Driver 3.2.3-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation.

System freezed.

I have take a look in the last Changelog and found this Change:

[email protected], 2004-11-24 14:53:50-05:00, [email protected]
[PATCH] e100: early reset fix

I will try to boot an bk without this patch.

Ruben

Signature · 3 lines
Ruben Puettmann
[email protected]
http://www.puettmann.net