Skip to contentSkip to conversation

sata_sil.c: blacklist seagate ST380013AS

PATCH In review John Lash 2 participants 3 messages Dec 2, 2004 – Dec 16, 2004

lore
Share & tools
lore

John Lash

author
#0 lore raw

PATCH 1/1 sata_sil.c: blacklist seagate ST380013AS

Jeff,

here's a patch to add seagate ST380013AS to the sata_sil.c blacklist. and a pointer to the relevant thread on lkml.

http://www.ussg.iu.edu/hypermail/linux/kernel/0412.0/0120.html

--john

--- linux-2.6.10-rc2-bk13.orig/drivers/scsi/sata_sil.c 2004-12-01 22:39:34.000000000 -0600+++ linux-2.6.10-rc2-bk13/drivers/scsi/sata_sil.c

2004-12-01 10:22:59.000000000 -0600@@ -84,6 +84,7 @@ struct sil_drivelist {
        { "ST330013AS",         SIL_QUIRK_MOD15WRITE },
        { "ST340017AS",         SIL_QUIRK_MOD15WRITE },
        { "ST360015AS",         SIL_QUIRK_MOD15WRITE },
+       { "ST380013AS",         SIL_QUIRK_MOD15WRITE },
        { "ST380023AS",         SIL_QUIRK_MOD15WRITE },
        { "ST3120023AS",        SIL_QUIRK_MOD15WRITE },
        { "ST3160023AS",        SIL_QUIRK_MOD15WRITE },
#1 lore raw
Quoted 5 lines · On Thu, 2 Dec 2004 10:03:04 -0600 John Lash <[email protected]> wrote:

Jeff,

here's a patch to add seagate ST380013AS to the sata_sil.c blacklist. and a pointer to the relevant thread on lkml.

For what it's worth, I built an x86_64 kernel (2.6.9 and 2.6.10-rc3) for this system and booted it. I didn't apply the blacklist patch yet. The system booted fine, no complaints in the boot messages

Performance is good and the drive appears quite stable so far. I'm going to beat on it a bit more over the next couple of days. If there is a particular test that would be of interest, please let me know. I'm planning to do large reads and writes with dd and a couple of runs with bonnie.

This might explain why some people are running Seagate drives with sata_sil with no apparent problems.

--john

#2 lore raw

On Mon, 13 Dec 2004 07:48:14 -0600
John Lash <[email protected]> wrote:

...

Quoted 4 lines

For what it's worth, I built an x86_64 kernel (2.6.9 and 2.6.10-rc3) for this system and booted it. I didn't apply the blacklist patch yet. The system booted fine, no complaints in the boot messages

Quoted 8 lines

Performance is good and the drive appears quite stable so far. I'm going to beat on it a bit more over the next couple of days. If there is a particular test that would be of interest, please let me know. I'm planning to do large reads and writes with dd and a couple of runs with bonnie.

This might explain why some people are running Seagate drives with sata_sil with no apparent problems.

No good. The drive got hung up yesterday with the usual errors. I reapplied the blacklist patch.

so it goes.

--john