USB-Stick hotplug Problem
thank you for the support, i found the problem :).
the mount command is not executed because the device is allocated by udev.
adding a sleep 1 before the mount gives udev the time to create /dev/sdb1.
regards.
Quoted 1 line
here are more things in heaven and earth,
horatio, than are dreamt of in your philosophy.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
Hello,
this is the message when I plug my USB Stick onto the PC.
Dec 13 18:36:56 Yve usb 2-1: new full speed USB device using address 4 Dec 13 18:36:57 Yve scsi0 : SCSI emulation for USB Mass Storage devices Dec 13 18:37:02 Yve wait_for_sysfs[29469]: either wait_for_sysfs (udev 045) needs an update to handle the device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0' properly (no bus device link) or the sysfs-support of your device's driver needs to be fixed, please report to <[email protected]>
Cya
Florian
Quoted 1 line · Florian Urban
this is the message when I plug my USB Stick onto the PC.
Please ignore it and upgrade udev to the latest release.
Signature · 2 lines
ciao, | Marco | [9769 omLbV8fLbSRgQ]