Framebuffer console & Tux
Hello!
I'm just writing a new frame buffer driver (for a MPC8xx based system) and I have a strange problem... I init the driver structs as follows:
strcpy(fb_info.gen.info.modename, "e13505fb"); /* strcpy(fb_info.gen.info.fontname, default_fontname); */ fb_info.gen.info.changevar = NULL; fb_info.gen.info.node = -1; fb_info.gen.info.fbops = &e13505fb_ops; fb_info.gen.info.disp = &fb_info.disp; fb_info.gen.info.switch_con = &fbgen_switch; fb_info.gen.info.updatevar = &fbgen_update_var; fb_info.gen.info.blank = &fbgen_blank; fb_info.gen.parsize = sizeof(struct e13505fb_par); fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT; fb_info.disp.var.activate = FB_ACTIVATE_NOW; /* This should give a reasonable default video mode */ fbgen_get_var(&fb_info.disp.var, -1, &fb_info.gen.info); fbgen_do_set_var(&fb_info.disp.var, 1, &fb_info.gen); fbgen_set_disp(-1, &fb_info.gen); fbgen_install_cmap(0, &fb_info.gen);
/* Register the new frame buffer */
ret = register_framebuffer(&fb_info.gen.info);
if (ret < 0)
goto fb_register;
and at boot I get:
Console: switching to frame buffer device
But I can't see Tux in my LCD nor the usual console messages! Can anyone help me?
Thanks in advance,
Rodolfo
P.S. I use the linux kernel parameter «console=tty0».
Signature · 11 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems home page: giometti.enneenne.com UNIX programming phone: +39 349 2432127 ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/
Hello,
Quoted 1 line · Rodolfo Giometti
I'm just writing a new frame buffer driver (for a MPC8xx based system)
Just to make sure you are not doing duplicated work:
I have seen "heretic" running on 823/821 using the framebuffer (I think) - but that was several years ago on a Linux Planet box from Embedded Planet. This was with Linux-2.2 or 2.3 or something. Just making sure you have searched the net for available code...
/ magnus
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
Quoted 6 lines · Magnus Damm
Hello,
Quoted 1 line · Rodolfo Giometti
I'm just writing a new frame buffer driver (for a MPC8xx based system)
Just to make sure you are not doing duplicated work:
I see, but this system is based on MPC8xx and the LCD controller is an Epson 13505.
Regards,
Rodolfo
Signature · 11 lines
GNU/Linux Solutions e-mail: [email protected] Linux Device Driver [email protected] Embedded Systems home page: giometti.enneenne.com UNIX programming phone: +39 349 2432127 ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/